[linux-sunxi] [PATCH 5/8] clk: sunxi-ng: Add support for the Allwinner H616 CCU
Icenowy Zheng
icenowy at aosc.io
Thu Dec 10 08:31:35 EST 2020
在 2020-12-02星期三的 13:54 +0000，Andre Przywara写道：
> While the clocks are fairly similar to the H6, many differ in tiny
> details, so a separate clock driver seems indicated.
>
> Derived from the H6 clock driver, and adjusted according to the
> manual.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
> drivers/clk/sunxi-ng/Kconfig | 7 +-
> drivers/clk/sunxi-ng/Makefile | 1 +
> drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 1134
> +++++++++++++++++++
> drivers/clk/sunxi-ng/ccu-sun50i-h616.h | 58 +
> include/dt-bindings/clock/sun50i-h616-ccu.h | 110 ++
> include/dt-bindings/reset/sun50i-h616-ccu.h | 67 ++
> 6 files changed, 1376 insertions(+), 1 deletion(-)
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.h
> create mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h
> create mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h
>
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-
> ng/Kconfig
> index ce5f5847d5d3..cd46d8853876 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -32,8 +32,13 @@ config SUN50I_H6_CCU
> default ARM64 && ARCH_SUNXI
> depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
>
> +config SUN50I_H616_CCU
> + bool "Support for the Allwinner H616 CCU"
> + default ARM64 && ARCH_SUNXI
> + depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
> +
> config SUN50I_H6_R_CCU
> - bool "Support for the Allwinner H6 PRCM CCU"
> + bool "Support for the Allwinner H6 and H616 PRCM CCU"
> default ARM64 && ARCH_SUNXI
> depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
>
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-
> ng/Makefile
> index 3eb5cff40eac..96c324306d97 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-
> a64.o
> obj-$(CONFIG_SUN50I_A100_CCU) += ccu-sun50i-a100.o
> obj-$(CONFIG_SUN50I_A100_R_CCU) += ccu-sun50i-a100-r.o
> obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o
> +obj-$(CONFIG_SUN50I_H616_CCU) += ccu-sun50i-h616.o
> obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o
> obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o
> obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> new file mode 100644
> index 000000000000..3fbb258f0354
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
> @@ -0,0 +1,1134 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 Arm Ltd.
> + * Based on the H6 CCU driver, which is:
> + * Copyright (c) 2017 Icenowy Zheng <icenowy at aosc.io>
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +
> +#include "ccu_common.h"
> +#include "ccu_reset.h"
> +
> +#include "ccu_div.h"
> +#include "ccu_gate.h"
> +#include "ccu_mp.h"
> +#include "ccu_mult.h"
> +#include "ccu_nk.h"
> +#include "ccu_nkm.h"
> +#include "ccu_nkmp.h"
> +#include "ccu_nm.h"
> +
> +#include "ccu-sun50i-h616.h"
> +
> +/*
> + * The CPU PLL is actually NP clock, with P being /1, /2 or /4.
> However
> + * P should only be used for output frequencies lower than 288 MHz.
> + *
> + * For now we can just model it as a multiplier clock, and force P
> to /1.
> + *
> + * The M factor is present in the register's description, but not in
> the
> + * frequency formula, and it's documented as "M is only used for
> backdoor
> + * testing", so it's not modelled and then force to 0.
> + */
> +#define SUN50I_H616_PLL_CPUX_REG 0x000
> +static struct ccu_mult pll_cpux_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .common = {
> + .reg = 0x000,
> + .hw.init = CLK_HW_INIT("pll-cpux", "osc24M",
> + &ccu_mult_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K
> */
> +#define SUN50I_H616_PLL_DDR0_REG 0x010
> +static struct ccu_nkmp pll_ddr0_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .common = {
> + .reg = 0x010,
> + .hw.init = CLK_HW_INIT("pll-ddr0", "osc24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_H616_PLL_DDR1_REG 0x018
> +static struct ccu_nkmp pll_ddr1_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .common = {
> + .reg = 0x018,
> + .hw.init = CLK_HW_INIT("pll-ddr1", "osc24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_H616_PLL_PERIPH0_REG 0x020
> +static struct ccu_nkmp pll_periph0_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .fixed_post_div = 4,
Isn't it 2 here?
The user manual says:
```
PLL_PERI0(2X) = 24 MHz*N/M0/M1
PLL_PERI0(1X) = 24 MHz*N/M0/M1/2
```
+ .common = {
> + .reg = 0x020,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_H616_PLL_PERIPH1_REG 0x028
> +static struct ccu_nkmp pll_periph1_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .fixed_post_div = 4,
> + .common = {
> + .reg = 0x028,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_H616_PLL_GPU_REG 0x030
> +static struct ccu_nkmp pll_gpu_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .common = {
> + .reg = 0x030,
> + .hw.init = CLK_HW_INIT("pll-gpu", "osc24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +/*
> + * For Video PLLs, the output divider is described as "used for
> testing"
> + * in the user manual. So it's not modelled and forced to 0.
> + */
> +#define SUN50I_H616_PLL_VIDEO0_REG 0x040
> +static struct ccu_nm pll_video0_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .fixed_post_div = 4,
> + .min_rate = 288000000,
> + .max_rate = 2400000000UL,
> + .common = {
> + .reg = 0x040,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-video0", "osc24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_H616_PLL_VIDEO1_REG 0x048
> +static struct ccu_nm pll_video1_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .fixed_post_div = 4,
> + .min_rate = 288000000,
> + .max_rate = 2400000000UL,
> + .common = {
> + .reg = 0x048,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-video1", "osc24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_H616_PLL_VIDEO2_REG 0x050
> +static struct ccu_nm pll_video2_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .fixed_post_div = 4,
> + .min_rate = 288000000,
> + .max_rate = 2400000000UL,
> + .common = {
> + .reg = 0x050,
> + .features = CCU_FEATURE_FIXED_POSTDIV,
> + .hw.init = CLK_HW_INIT("pll-video2", "osc24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_H616_PLL_VE_REG 0x058
> +static struct ccu_nkmp pll_ve_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .common = {
> + .reg = 0x058,
> + .hw.init = CLK_HW_INIT("pll-ve", "osc24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +#define SUN50I_H616_PLL_DE_REG 0x060
> +static struct ccu_nkmp pll_de_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
> + .common = {
> + .reg = 0x060,
> + .hw.init = CLK_HW_INIT("pll-de", "osc24M",
> + &ccu_nkmp_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +/*
> + * TODO: Determine SDM settings for the audio PLL. The manual
> suggests
> + * PLL_FACTOR_N=16, PLL_POST_DIV_P=2, OUTPUT_DIV=2,
> pattern=0xe000c49b
> + * for 24.576 MHz, and PLL_FACTOR_N=22, PLL_POST_DIV_P=3,
> OUTPUT_DIV=2,
> + * pattern=0xe001288c for 22.5792 MHz.
> + * This clashes with our fixed PLL_POST_DIV_P.
> + */
> +#define SUN50I_H616_PLL_AUDIO_REG 0x078
> +static struct ccu_nm pll_audio_hs_clk = {
> + .enable = BIT(31),
> + .lock = BIT(28),
> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
> + .common = {
> + .reg = 0x078,
> + .hw.init = CLK_HW_INIT("pll-audio-hs", "osc24M",
> + &ccu_nm_ops,
> + CLK_SET_RATE_UNGATE),
> + },
> +};
> +
> +static const char * const cpux_parents[] = { "osc24M", "osc32k",
> + "iosc", "pll-cpux", "pll-
> periph0" };
> +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
> + 0x500, 24, 3, CLK_SET_RATE_PARENT |
> CLK_IS_CRITICAL);
> +static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
> +static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2,
> 0);
> +
> +static const char * const psi_ahb1_ahb2_parents[] = { "osc24M",
> "osc32k",
> + "iosc", "pll-
> periph0" };
> +static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
> + psi_ahb1_ahb2_parents,
> + 0x510,
> + 0, 2, /* M */
> + 8, 2, /* P */
> + 24, 2, /* mux */
> + 0);
> +
> +static const char * const ahb3_apb1_apb2_parents[] = { "osc24M",
> "osc32k",
> + "psi-ahb1-ahb2",
> + "pll-periph0" };
> +static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3",
> ahb3_apb1_apb2_parents, 0x51c,
> + 0, 2, /* M */
> + 8, 2, /* P */
> + 24, 2, /* mux */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1",
> ahb3_apb1_apb2_parents, 0x520,
> + 0, 2, /* M */
> + 8, 2, /* P */
> + 24, 2, /* mux */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2",
> ahb3_apb1_apb2_parents, 0x524,
> + 0, 2, /* M */
> + 8, 2, /* P */
> + 24, 2, /* mux */
> + 0);
> +
> +static const char * const mbus_parents[] = { "osc24M", "pll-periph0-
> 2x",
> + "pll-ddr0", "pll-ddr1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
> 0x540,
> + 0, 3, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + CLK_IS_CRITICAL);
> +
> +static const char * const de_parents[] = { "pll-de", "pll-periph0-
> 2x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
> + 0, 4, /* M */
> + 24, 1, /* mux */
> + BIT(31), /* gate */
> + CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
> + 0x60c, BIT(0), 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
> + de_parents,
> + 0x620,
> + 0, 4, /* M */
> + 24, 1, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-
> ahb1-ahb2",
> + 0x62c, BIT(0), 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d", de_parents, 0x630,
> + 0, 4, /* M */
> + 24, 1, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
> + 0x63c, BIT(0), 0);
> +
> +static const char * const gpu0_parents[] = { "pll-gpu", "gpu1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(gpu0_clk, "gpu0", gpu0_parents,
> 0x670,
> + 0, 2, /* M */
> + 24, 1, /* mux */
> + BIT(31), /* gate */
> + CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_M_WITH_GATE(gpu1_clk, "gpu1", "pll-periph0-2x",
> 0x674,
> + 0, 3, /* M */
> + BIT(31),/* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
> + 0x67c, BIT(0), 0);
> +
> +static const char * const ce_parents[] = { "osc24M", "pll-periph0-
> 2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 1, /* mux */
> + BIT(31),/* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
> + 0x68c, BIT(0), 0);
> +
> +static const char * const ve_parents[] = { "pll-ve" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
> + 0, 3, /* M */
> + 24, 1, /* mux */
> + BIT(31), /* gate */
> + CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
> + 0x69c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
> + 0x70c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-
> ahb2",
> + 0x73c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
> +
> +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
> + 0x78c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
> + 0x79c, BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0),
> 0);
> +
> +static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc,
> BIT(0), 0);
> +
> +static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1"
> };
> +static struct ccu_div dram_clk = {
> + .div = _SUNXI_CCU_DIV(0, 2),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0x800,
> + .hw.init = CLK_HW_INIT_PARENTS("dram",
> + dram_parents,
> + &ccu_div_ops,
> + CLK_IS_CRITICAL),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
> + 0x804, BIT(0), 0);
> +static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
> + 0x804, BIT(1), 0);
> +static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
> + 0x804, BIT(2), 0);
> +static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
> + 0x804, BIT(3), 0);
> +static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
> + 0x804, BIT(5), 0);
> +static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
> + 0x804, BIT(10), 0);
> +
> +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
> + 0x80c, BIT(0), CLK_IS_CRITICAL);
> +
> +static const char * const nand_spi_parents[] = { "osc24M", "pll-
> periph0",
> + "pll-periph1", "pll-
> periph0-2x",
> + "pll-periph1-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0",
> nand_spi_parents, 0x810,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31),/* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1",
> nand_spi_parents, 0x814,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31),/* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c,
> BIT(0), 0);
> +
> +static const char * const mmc_parents[] = { "osc24M", "pll-periph0-
> 2x",
> + "pll-periph1-2x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0",
> mmc_parents, 0x830,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 2, /* post-div
> */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1",
> mmc_parents, 0x834,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 2, /* post-div
> */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2",
> mmc_parents, 0x838,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 2, /* post-div
> */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c,
> BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c,
> BIT(2), 0);
> +
> +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c,
> BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c,
> BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c,
> BIT(3), 0);
> +static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c,
> BIT(4), 0);
> +static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2", 0x90c,
> BIT(5), 0);
> +
> +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c,
> BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c,
> BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c,
> BIT(3), 0);
> +static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2", 0x91c,
> BIT(4), 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0",
> nand_spi_parents, 0x940,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31),/* gate */
> + 0);
> +
> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1",
> nand_spi_parents, 0x944,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 3, /* mux */
> + BIT(31),/* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c,
> BIT(1), 0);
> +
> +static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
> + BIT(31) | BIT(30), 0);
> +
> +static SUNXI_CCU_GATE(bus_emac0_clk, "bus-emac0", "ahb3", 0x97c,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_emac1_clk, "bus-emac1", "ahb3", 0x97c,
> BIT(1), 0);
> +
> +static const char * const ts_parents[] = { "osc24M", "pll-periph0"
> };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
> + 0, 4, /* M */
> + 8, 2, /* N */
> + 24, 1, /* mux */
> + BIT(31),/* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0),
> 0);
> +
> +static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0),
> 0);
> +
> +static const char * const audio_parents[] = { "pll-audio-1x", "pll-
> audio-2x",
> + "pll-audio-4x", "pll-
> audio-hs" };
> +static struct ccu_div spdif_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2,
> CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0xa20,
> + .hw.init = CLK_HW_INIT_PARENTS("spdif",
> + audio_parents,
> + &ccu_div_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c,
> BIT(0), 0);
> +
> +static struct ccu_div dmic_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2,
> CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0xa40,
> + .hw.init = CLK_HW_INIT_PARENTS("dmic",
> + audio_parents,
> + &ccu_div_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c,
> BIT(0), 0);
> +
> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_1x_clk, "audio-codec-
> 1x",
> + audio_parents, 0xa50,
> + 0, 4, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + CLK_SET_RATE_PARENT);
> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-
> 4x",
> + audio_parents, 0xa54,
> + 0, 4, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec",
> "apb1", 0xa5c,
> + BIT(0), 0);
> +
> +static struct ccu_div audio_hub_clk = {
> + .enable = BIT(31),
> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2,
> CLK_DIVIDER_POWER_OF_TWO),
> + .mux = _SUNXI_CCU_MUX(24, 2),
> + .common = {
> + .reg = 0xa60,
> + .hw.init = CLK_HW_INIT_PARENTS("audio-hub",
> + audio_parents,
> + &ccu_div_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1",
> 0xa6c, BIT(0), 0);
> +
> +/*
> + * There are OHCI 12M clock source selection bits for 2 USB 2.0
> ports.
> + * We will force them to 0 (12M divided from 48M).
> + */
> +#define SUN50I_H616_USB0_CLK_REG 0xa70
> +#define SUN50I_H616_USB1_CLK_REG 0xa74
> +#define SUN50I_H616_USB2_CLK_REG 0xa78
> +#define SUN50I_H616_USB3_CLK_REG 0xa7c
> +
> +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70,
> BIT(31), 0);
> +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70,
> BIT(29), 0);
> +
> +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74,
> BIT(31), 0);
> +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74,
> BIT(29), 0);
> +
> +static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc12M", 0xa78,
> BIT(31), 0);
> +static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M", 0xa78,
> BIT(29), 0);
> +
> +static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c,
> BIT(31), 0);
> +static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc12M", 0xa7c,
> BIT(29), 0);
> +
> +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c,
> BIT(0), 0);
> +static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c,
> BIT(1), 0);
> +static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb3", 0xa8c,
> BIT(2), 0);
> +static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c,
> BIT(3), 0);
> +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c,
> BIT(4), 0);
> +static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c,
> BIT(5), 0);
> +static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb3", 0xa8c,
> BIT(6), 0);
> +static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c,
> BIT(7), 0);
> +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8),
> 0);
> +
> +static SUNXI_CCU_GATE(bus_keyadc_clk, "bus-keyadc", "apb1", 0xa9c,
> BIT(0), 0);
> +
> +static struct clk_fixed_factor pll_periph0_4x_clk;
> +
> +static const char * const hdmi_parents[] = { "pll-video0", "pll-
> video0-4x",
> + "pll-video2", "pll-video2-
> 4x" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
> 0xb00,
> + 0, 4, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0xb04,
> BIT(31), 0);
> +
> +static const char * const hdmi_cec_parents[] = { "osc32k", "pll-
> periph0-2x" };
> +static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
> + { .index = 1, .div = 36621 },
> +};
> +
> +#define SUN50I_H616_HDMI_CEC_CLK_REG 0xb10
> +static struct ccu_mux hdmi_cec_clk = {
> + .enable = BIT(31),
> +
> + .mux = {
> + .shift = 24,
> + .width = 2,
> +
> + .fixed_predivs = hdmi_cec_predivs,
> + .n_predivs = ARRAY_SIZE(hdmi_cec_predivs),
> + },
> +
> + .common = {
> + .reg = 0xb10,
> + .features = CCU_FEATURE_VARIABLE_PREDIV,
> + .hw.init = CLK_HW_INIT_PARENTS("hdmi-cec",
> + hdmi_cec_parents,
> + &ccu_mux_ops,
> + 0),
> + },
> +};
> +
> +static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c,
> BIT(0), 0);
> +
> +static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
> + 0xb5c, BIT(0), 0);
> +
> +static const char * const tcon_tv0_parents[] = { "pll-video0",
> + "pll-video0-4x",
> + "pll-video1",
> + "pll-video1-4x" };
> +static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
> + tcon_tv0_parents, 0xb80,
> + 0, 4, /* M */
> + 8, 2, /* P */
> + 24, 3, /* mux */
> + BIT(31), /* gate */
> + CLK_SET_RATE_PARENT);
> +
> +static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
> + 0xb9c, BIT(0), 0);
> +
> +static const char * const hdcp_parents[] = { "pll-periph0", "pll-
> periph1" };
> +static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents,
> 0xc40,
> + 0, 4, /* M */
> + 24, 2, /* mux */
> + BIT(31), /* gate */
> + 0);
> +
> +static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c,
> BIT(0), 0);
> +
> +/* Fixed factor clocks */
> +static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1,
> 0);
> +
> +static const struct clk_hw *clk_parent_pll_audio[] = {
> + &pll_audio_hs_clk.common.hw
> +};
> +
> +/*
> + * The divider of pll-audio is fixed to 24 for now, so 24576000 and
> 22579200
> + * rates can be set exactly in conjunction with sigma-delta
> modulation.
> + */
> +static CLK_FIXED_FACTOR_HWS(pll_audio_1x_clk, "pll-audio-1x",
> + clk_parent_pll_audio,
> + 96, 1, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
> + clk_parent_pll_audio,
> + 48, 1, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
> + clk_parent_pll_audio,
> + 24, 1, CLK_SET_RATE_PARENT);
> +
> +static const struct clk_hw *pll_periph0_parents[] = {
> + &pll_periph0_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_periph0_4x_clk, "pll-periph0-4x",
> + pll_periph0_parents,
> + 1, 4, 0);
> +static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x",
> + pll_periph0_parents,
> + 1, 2, 0);
> +
> +static const struct clk_hw *pll_periph1_parents[] = {
> + &pll_periph1_clk.common.hw
> +};
> +static CLK_FIXED_FACTOR_HWS(pll_periph1_4x_clk, "pll-periph1-4x",
> + pll_periph1_parents,
> + 1, 4, 0);
> +static CLK_FIXED_FACTOR_HWS(pll_periph1_2x_clk, "pll-periph1-2x",
> + pll_periph1_parents,
> + 1, 2, 0);
> +
> +static CLK_FIXED_FACTOR_HW(pll_video0_4x_clk, "pll-video0-4x",
> + &pll_video0_clk.common.hw,
> + 1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HW(pll_video1_4x_clk, "pll-video1-4x",
> + &pll_video1_clk.common.hw,
> + 1, 4, CLK_SET_RATE_PARENT);
> +static CLK_FIXED_FACTOR_HW(pll_video2_4x_clk, "pll-video2-4x",
> + &pll_video2_clk.common.hw,
> + 1, 4, CLK_SET_RATE_PARENT);
> +
> +static struct ccu_common *sun50i_h616_ccu_clks[] = {
> + &pll_cpux_clk.common,
> + &pll_ddr0_clk.common,
> + &pll_ddr1_clk.common,
> + &pll_periph0_clk.common,
> + &pll_periph1_clk.common,
> + &pll_gpu_clk.common,
> + &pll_video0_clk.common,
> + &pll_video1_clk.common,
> + &pll_video2_clk.common,
> + &pll_ve_clk.common,
> + &pll_de_clk.common,
> + &pll_audio_hs_clk.common,
> + &cpux_clk.common,
> + &axi_clk.common,
> + &cpux_apb_clk.common,
> + &psi_ahb1_ahb2_clk.common,
> + &ahb3_clk.common,
> + &apb1_clk.common,
> + &apb2_clk.common,
> + &mbus_clk.common,
> + &de_clk.common,
> + &bus_de_clk.common,
> + &deinterlace_clk.common,
> + &bus_deinterlace_clk.common,
> + &g2d_clk.common,
> + &bus_g2d_clk.common,
> + &gpu0_clk.common,
> + &bus_gpu_clk.common,
> + &gpu1_clk.common,
> + &ce_clk.common,
> + &bus_ce_clk.common,
> + &ve_clk.common,
> + &bus_ve_clk.common,
> + &bus_dma_clk.common,
> + &bus_hstimer_clk.common,
> + &avs_clk.common,
> + &bus_dbg_clk.common,
> + &bus_psi_clk.common,
> + &bus_pwm_clk.common,
> + &bus_iommu_clk.common,
> + &dram_clk.common,
> + &mbus_dma_clk.common,
> + &mbus_ve_clk.common,
> + &mbus_ce_clk.common,
> + &mbus_ts_clk.common,
> + &mbus_nand_clk.common,
> + &mbus_g2d_clk.common,
> + &bus_dram_clk.common,
> + &nand0_clk.common,
> + &nand1_clk.common,
> + &bus_nand_clk.common,
> + &mmc0_clk.common,
> + &mmc1_clk.common,
> + &mmc2_clk.common,
> + &bus_mmc0_clk.common,
> + &bus_mmc1_clk.common,
> + &bus_mmc2_clk.common,
> + &bus_uart0_clk.common,
> + &bus_uart1_clk.common,
> + &bus_uart2_clk.common,
> + &bus_uart3_clk.common,
> + &bus_uart4_clk.common,
> + &bus_uart5_clk.common,
> + &bus_i2c0_clk.common,
> + &bus_i2c1_clk.common,
> + &bus_i2c2_clk.common,
> + &bus_i2c3_clk.common,
> + &bus_i2c4_clk.common,
> + &spi0_clk.common,
> + &spi1_clk.common,
> + &bus_spi0_clk.common,
> + &bus_spi1_clk.common,
> + &emac_25m_clk.common,
> + &bus_emac0_clk.common,
> + &bus_emac1_clk.common,
> + &ts_clk.common,
> + &bus_ts_clk.common,
> + &bus_ths_clk.common,
> + &spdif_clk.common,
> + &bus_spdif_clk.common,
> + &dmic_clk.common,
> + &bus_dmic_clk.common,
> + &audio_codec_1x_clk.common,
> + &audio_codec_4x_clk.common,
> + &bus_audio_codec_clk.common,
> + &audio_hub_clk.common,
> + &bus_audio_hub_clk.common,
> + &usb_ohci0_clk.common,
> + &usb_phy0_clk.common,
> + &usb_ohci1_clk.common,
> + &usb_phy1_clk.common,
> + &usb_ohci2_clk.common,
> + &usb_phy2_clk.common,
> + &usb_ohci3_clk.common,
> + &usb_phy3_clk.common,
> + &bus_ohci0_clk.common,
> + &bus_ohci1_clk.common,
> + &bus_ohci2_clk.common,
> + &bus_ohci3_clk.common,
> + &bus_ehci0_clk.common,
> + &bus_ehci1_clk.common,
> + &bus_ehci2_clk.common,
> + &bus_ehci3_clk.common,
> + &bus_otg_clk.common,
> + &bus_keyadc_clk.common,
> + &hdmi_clk.common,
> + &hdmi_slow_clk.common,
> + &hdmi_cec_clk.common,
> + &bus_hdmi_clk.common,
> + &bus_tcon_top_clk.common,
> + &tcon_tv0_clk.common,
> + &bus_tcon_tv0_clk.common,
> + &hdcp_clk.common,
> + &bus_hdcp_clk.common,
> +};
> +
> +static struct clk_hw_onecell_data sun50i_h616_hw_clks = {
> + .hws = {
> + [CLK_OSC12M] = &osc12M_clk.hw,
> + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
> + [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
> + [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
> + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
> + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
> + [CLK_PLL_PERIPH0_4X] = &pll_periph0_4x_clk.hw,
> + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
> + [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
> + [CLK_PLL_PERIPH1_4X] = &pll_periph1_4x_clk.hw,
> + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
> + [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
> + [CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
> + [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
> + [CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
> + [CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw,
> + [CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw,
> + [CLK_PLL_VE] = &pll_ve_clk.common.hw,
> + [CLK_PLL_DE] = &pll_de_clk.common.hw,
> + [CLK_PLL_AUDIO_HS] =
> &pll_audio_hs_clk.common.hw,
> + [CLK_PLL_AUDIO_1X] = &pll_audio_1x_clk.hw,
> + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
> + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
> + [CLK_CPUX] = &cpux_clk.common.hw,
> + [CLK_AXI] = &axi_clk.common.hw,
> + [CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
> + [CLK_PSI_AHB1_AHB2] =
> &psi_ahb1_ahb2_clk.common.hw,
> + [CLK_AHB3] = &ahb3_clk.common.hw,
> + [CLK_APB1] = &apb1_clk.common.hw,
> + [CLK_APB2] = &apb2_clk.common.hw,
> + [CLK_MBUS] = &mbus_clk.common.hw,
> + [CLK_DE] = &de_clk.common.hw,
> + [CLK_BUS_DE] = &bus_de_clk.common.hw,
> + [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
> + [CLK_BUS_DEINTERLACE] =
> &bus_deinterlace_clk.common.hw,
> + [CLK_G2D] = &g2d_clk.common.hw,
> + [CLK_BUS_G2D] = &bus_g2d_clk.common.hw,
> + [CLK_GPU0] = &gpu0_clk.common.hw,
> + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
> + [CLK_GPU1] = &gpu1_clk.common.hw,
> + [CLK_CE] = &ce_clk.common.hw,
> + [CLK_BUS_CE] = &bus_ce_clk.common.hw,
> + [CLK_VE] = &ve_clk.common.hw,
> + [CLK_BUS_VE] = &bus_ve_clk.common.hw,
> + [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
> + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
> + [CLK_AVS] = &avs_clk.common.hw,
> + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
> + [CLK_BUS_PSI] = &bus_psi_clk.common.hw,
> + [CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
> + [CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
> + [CLK_DRAM] = &dram_clk.common.hw,
> + [CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
> + [CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
> + [CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
> + [CLK_MBUS_TS] = &mbus_ts_clk.common.hw,
> + [CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
> + [CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw,
> + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
> + [CLK_NAND0] = &nand0_clk.common.hw,
> + [CLK_NAND1] = &nand1_clk.common.hw,
> + [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
> + [CLK_MMC0] = &mmc0_clk.common.hw,
> + [CLK_MMC1] = &mmc1_clk.common.hw,
> + [CLK_MMC2] = &mmc2_clk.common.hw,
> + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
> + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
> + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
> + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
> + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
> + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
> + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
> + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
> + [CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
> + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
> + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
> + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
> + [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
> + [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
> + [CLK_SPI0] = &spi0_clk.common.hw,
> + [CLK_SPI1] = &spi1_clk.common.hw,
> + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
> + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
> + [CLK_EMAC_25M] = &emac_25m_clk.common.hw,
> + [CLK_BUS_EMAC0] = &bus_emac0_clk.common.hw,
> + [CLK_BUS_EMAC1] = &bus_emac1_clk.common.hw,
> + [CLK_TS] = &ts_clk.common.hw,
> + [CLK_BUS_TS] = &bus_ts_clk.common.hw,
> + [CLK_BUS_THS] = &bus_ths_clk.common.hw,
> + [CLK_SPDIF] = &spdif_clk.common.hw,
> + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
> + [CLK_DMIC] = &dmic_clk.common.hw,
> + [CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
> + [CLK_AUDIO_CODEC_1X] =
> &audio_codec_1x_clk.common.hw,
> + [CLK_AUDIO_CODEC_4X] =
> &audio_codec_4x_clk.common.hw,
> + [CLK_BUS_AUDIO_CODEC] =
> &bus_audio_codec_clk.common.hw,
> + [CLK_AUDIO_HUB] = &audio_hub_clk.common.hw,
> + [CLK_BUS_AUDIO_HUB] =
> &bus_audio_hub_clk.common.hw,
> + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
> + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
> + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
> + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
> + [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
> + [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
> + [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
> + [CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
> + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
> + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
> + [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
> + [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
> + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
> + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
> + [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
> + [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
> + [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
> + [CLK_BUS_KEYADC] = &bus_keyadc_clk.common.hw,
> + [CLK_HDMI] = &hdmi_clk.common.hw,
> + [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
> + [CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw,
> + [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
> + [CLK_BUS_TCON_TOP] =
> &bus_tcon_top_clk.common.hw,
> + [CLK_TCON_TV0] = &tcon_tv0_clk.common.hw,
> + [CLK_BUS_TCON_TV0] =
> &bus_tcon_tv0_clk.common.hw,
> + [CLK_HDCP] = &hdcp_clk.common.hw,
> + [CLK_BUS_HDCP] = &bus_hdcp_clk.common.hw,
> + },
> + .num = CLK_NUMBER,
> +};
> +
> +static struct ccu_reset_map sun50i_h616_ccu_resets[] = {
> + [RST_MBUS] = { 0x540, BIT(30) },
> +
> + [RST_BUS_DE] = { 0x60c, BIT(16) },
> + [RST_BUS_DEINTERLACE] = { 0x62c, BIT(16) },
> + [RST_BUS_GPU] = { 0x67c, BIT(16) },
> + [RST_BUS_CE] = { 0x68c, BIT(16) },
> + [RST_BUS_VE] = { 0x69c, BIT(16) },
> + [RST_BUS_DMA] = { 0x70c, BIT(16) },
> + [RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
> + [RST_BUS_DBG] = { 0x78c, BIT(16) },
> + [RST_BUS_PSI] = { 0x79c, BIT(16) },
> + [RST_BUS_PWM] = { 0x7ac, BIT(16) },
> + [RST_BUS_IOMMU] = { 0x7bc, BIT(16) },
> + [RST_BUS_DRAM] = { 0x80c, BIT(16) },
> + [RST_BUS_NAND] = { 0x82c, BIT(16) },
> + [RST_BUS_MMC0] = { 0x84c, BIT(16) },
> + [RST_BUS_MMC1] = { 0x84c, BIT(17) },
> + [RST_BUS_MMC2] = { 0x84c, BIT(18) },
> + [RST_BUS_UART0] = { 0x90c, BIT(16) },
> + [RST_BUS_UART1] = { 0x90c, BIT(17) },
> + [RST_BUS_UART2] = { 0x90c, BIT(18) },
> + [RST_BUS_UART3] = { 0x90c, BIT(19) },
> + [RST_BUS_UART4] = { 0x90c, BIT(20) },
> + [RST_BUS_UART5] = { 0x90c, BIT(21) },
> + [RST_BUS_I2C0] = { 0x91c, BIT(16) },
> + [RST_BUS_I2C1] = { 0x91c, BIT(17) },
> + [RST_BUS_I2C2] = { 0x91c, BIT(18) },
> + [RST_BUS_I2C3] = { 0x91c, BIT(19) },
> + [RST_BUS_I2C4] = { 0x91c, BIT(20) },
> + [RST_BUS_SPI0] = { 0x96c, BIT(16) },
> + [RST_BUS_SPI1] = { 0x96c, BIT(17) },
> + [RST_BUS_EMAC0] = { 0x97c, BIT(16) },
> + [RST_BUS_EMAC1] = { 0x97c, BIT(17) },
> + [RST_BUS_TS] = { 0x9bc, BIT(16) },
> + [RST_BUS_THS] = { 0x9fc, BIT(16) },
> + [RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
> + [RST_BUS_DMIC] = { 0xa4c, BIT(16) },
> + [RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) },
> + [RST_BUS_AUDIO_HUB] = { 0xa6c, BIT(16) },
> +
> + [RST_USB_PHY0] = { 0xa70, BIT(30) },
> + [RST_USB_PHY1] = { 0xa74, BIT(30) },
> + [RST_USB_PHY2] = { 0xa78, BIT(30) },
> + [RST_USB_PHY3] = { 0xa7c, BIT(30) },
> +
> + [RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
> + [RST_BUS_OHCI1] = { 0xa8c, BIT(17) },
> + [RST_BUS_OHCI2] = { 0xa8c, BIT(18) },
> + [RST_BUS_OHCI3] = { 0xa8c, BIT(19) },
> + [RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
> + [RST_BUS_EHCI1] = { 0xa8c, BIT(21) },
> + [RST_BUS_EHCI2] = { 0xa8c, BIT(22) },
> + [RST_BUS_EHCI3] = { 0xa8c, BIT(23) },
> + [RST_BUS_OTG] = { 0xa8c, BIT(24) },
> + [RST_BUS_KEYADC] = { 0xa9c, BIT(16) },
> +
> + [RST_BUS_HDMI] = { 0xb1c, BIT(16) },
> + [RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) },
> + [RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) },
> + [RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) },
> + [RST_BUS_HDCP] = { 0xc4c, BIT(16) },
> +};
> +
> +static const struct sunxi_ccu_desc sun50i_h616_ccu_desc = {
> + .ccu_clks = sun50i_h616_ccu_clks,
> + .num_ccu_clks = ARRAY_SIZE(sun50i_h616_ccu_clks),
> +
> + .hw_clks = &sun50i_h616_hw_clks,
> +
> + .resets = sun50i_h616_ccu_resets,
> + .num_resets = ARRAY_SIZE(sun50i_h616_ccu_resets),
> +};
> +
> +static const u32 pll_regs[] = {
> + SUN50I_H616_PLL_CPUX_REG,
> + SUN50I_H616_PLL_DDR0_REG,
> + SUN50I_H616_PLL_DDR1_REG,
> + SUN50I_H616_PLL_PERIPH0_REG,
> + SUN50I_H616_PLL_PERIPH1_REG,
> + SUN50I_H616_PLL_GPU_REG,
> + SUN50I_H616_PLL_VIDEO0_REG,
> + SUN50I_H616_PLL_VIDEO1_REG,
> + SUN50I_H616_PLL_VIDEO2_REG,
> + SUN50I_H616_PLL_VE_REG,
> + SUN50I_H616_PLL_DE_REG,
> + SUN50I_H616_PLL_AUDIO_REG,
> +};
> +
> +static const u32 pll_video_regs[] = {
> + SUN50I_H616_PLL_VIDEO0_REG,
> + SUN50I_H616_PLL_VIDEO1_REG,
> + SUN50I_H616_PLL_VIDEO2_REG,
> +};
> +
> +static const u32 usb2_clk_regs[] = {
> + SUN50I_H616_USB0_CLK_REG,
> + SUN50I_H616_USB1_CLK_REG,
> + SUN50I_H616_USB2_CLK_REG,
> + SUN50I_H616_USB3_CLK_REG,
> +};
> +
> +static int sun50i_h616_ccu_probe(struct platform_device *pdev)
> +{
> + struct resource *res;
> + void __iomem *reg;
> + u32 val;
> + int i;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + reg = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(reg))
> + return PTR_ERR(reg);
> +
> + /* Enable the lock bits on all PLLs */
> + for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
> + val = readl(reg + pll_regs[i]);
> + val |= BIT(29);
> + writel(val, reg + pll_regs[i]);
> + }
> +
> + /*
> + * Force the output divider of video PLLs to 0.
> + *
> + * See the comment before pll-video0 definition for the reason.
> + */
> + for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
> + val = readl(reg + pll_video_regs[i]);
> + val &= ~BIT(0);
> + writel(val, reg + pll_video_regs[i]);
> + }
> +
> + /*
> + * Force OHCI 12M clock sources to 00 (12MHz divided from
> 48MHz)
> + *
> + * This clock mux is still mysterious, and the code just
> enforces
> + * it to have a valid clock parent.
> + */
> + for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
> + val = readl(reg + usb2_clk_regs[i]);
> + val &= ~GENMASK(25, 24);
> + writel (val, reg + usb2_clk_regs[i]);
> + }
> +
> + /*
> + * Force the post-divider of pll-audio to 12 and the output
> divider
> + * of it to 2, so 24576000 and 22579200 rates can be set
> exactly.
> + */
> + val = readl(reg + SUN50I_H616_PLL_AUDIO_REG);
> + val &= ~(GENMASK(21, 16) | BIT(0));
> + writel(val | (11 << 16) | BIT(0), reg +
> SUN50I_H616_PLL_AUDIO_REG);
> +
> + /*
> + * First clock parent (osc32K) is unusable for CEC. But since
> there
> + * is no good way to force parent switch (both run with same
> frequency),
> + * just set second clock parent here.
> + */
> + val = readl(reg + SUN50I_H616_HDMI_CEC_CLK_REG);
> + val |= BIT(24);
> + writel(val, reg + SUN50I_H616_HDMI_CEC_CLK_REG);
> +
> + return sunxi_ccu_probe(pdev->dev.of_node, reg,
> &sun50i_h616_ccu_desc);
> +}
> +
> +static const struct of_device_id sun50i_h616_ccu_ids[] = {
> + { .compatible = "allwinner,sun50i-h616-ccu",
> + .data = &sun50i_h616_ccu_desc },
> + { }
> +};
> +
> +static struct platform_driver sun50i_h616_ccu_driver = {
> + .probe = sun50i_h616_ccu_probe,
> + .driver = {
> + .name = "sun50i-h616-ccu",
> + .of_match_table = sun50i_h616_ccu_ids,
> + },
> +};
> +builtin_platform_driver(sun50i_h616_ccu_driver);
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
> b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
> new file mode 100644
> index 000000000000..da8f0b1206f9
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
> @@ -0,0 +1,58 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2020 Arm Ltd.
> + */
> +
> +#ifndef _CCU_SUN50I_H616_H_
> +#define _CCU_SUN50I_H616_H_
> +
> +#include <dt-bindings/clock/sun50i-h616-ccu.h>
> +#include <dt-bindings/reset/sun50i-h616-ccu.h>
> +
> +#define CLK_OSC12M 0
> +#define CLK_PLL_CPUX 1
> +#define CLK_PLL_DDR0 2
> +#define CLK_PLL_DDR1 3
> +
> +/* PLL_PERIPH0 exported for PRCM */
> +
> +#define CLK_PLL_PERIPH0_2X 5
> +#define CLK_PLL_PERIPH0_4X 6
> +#define CLK_PLL_PERIPH1 7
> +#define CLK_PLL_PERIPH1_2X 8
> +#define CLK_PLL_PERIPH1_4X 9
> +#define CLK_PLL_GPU 10
> +#define CLK_PLL_VIDEO0 11
> +#define CLK_PLL_VIDEO0_4X 12
> +#define CLK_PLL_VIDEO1 13
> +#define CLK_PLL_VIDEO1_4X 14
> +#define CLK_PLL_VIDEO2 15
> +#define CLK_PLL_VIDEO2_4X 16
> +#define CLK_PLL_VE 17
> +#define CLK_PLL_DE 18
> +#define CLK_PLL_AUDIO_HS 19
> +#define CLK_PLL_AUDIO_1X 20
> +#define CLK_PLL_AUDIO_2X 21
> +#define CLK_PLL_AUDIO_4X 22
> +
> +/* CPUX clock exported for DVFS */
> +
> +#define CLK_AXI 24
> +#define CLK_CPUX_APB 25
> +#define CLK_PSI_AHB1_AHB2 26
> +#define CLK_AHB3 27
> +
> +/* APB1 clock exported for PIO */
> +
> +#define CLK_APB2 29
> +#define CLK_MBUS 30
> +
> +/* All module clocks and bus gates are exported except DRAM */
> +
> +#define CLK_DRAM 51
> +
> +#define CLK_BUS_DRAM 58
> +
> +#define CLK_NUMBER (CLK_BUS_HDCP + 1)
> +
> +#endif /* _CCU_SUN50I_H616_H_ */
> diff --git a/include/dt-bindings/clock/sun50i-h616-ccu.h
> b/include/dt-bindings/clock/sun50i-h616-ccu.h
> new file mode 100644
> index 000000000000..a9cc8844e3a9
> --- /dev/null
> +++ b/include/dt-bindings/clock/sun50i-h616-ccu.h
> @@ -0,0 +1,110 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2020 Arm Ltd.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SUN50I_H616_H_
> +#define _DT_BINDINGS_CLK_SUN50I_H616_H_
> +
> +#define CLK_PLL_PERIPH0 4
> +
> +#define CLK_CPUX 23
> +
> +#define CLK_APB1 28
> +
> +#define CLK_DE 31
> +#define CLK_BUS_DE 32
> +#define CLK_DEINTERLACE 33
> +#define CLK_BUS_DEINTERLACE 34
> +#define CLK_G2D 35
> +#define CLK_BUS_G2D 36
> +#define CLK_GPU0 37
> +#define CLK_BUS_GPU 38
> +#define CLK_GPU1 39
> +#define CLK_CE 40
> +#define CLK_BUS_CE 41
> +#define CLK_VE 42
> +#define CLK_BUS_VE 43
> +#define CLK_BUS_DMA 44
> +#define CLK_BUS_HSTIMER 45
> +#define CLK_AVS 46
> +#define CLK_BUS_DBG 47
> +#define CLK_BUS_PSI 48
> +#define CLK_BUS_PWM 49
> +#define CLK_BUS_IOMMU 50
> +
> +#define CLK_MBUS_DMA 52
> +#define CLK_MBUS_VE 53
> +#define CLK_MBUS_CE 54
> +#define CLK_MBUS_TS 55
> +#define CLK_MBUS_NAND 56
> +#define CLK_MBUS_G2D 57
> +
> +#define CLK_NAND0 59
> +#define CLK_NAND1 60
> +#define CLK_BUS_NAND 61
> +#define CLK_MMC0 62
> +#define CLK_MMC1 63
> +#define CLK_MMC2 64
> +#define CLK_BUS_MMC0 65
> +#define CLK_BUS_MMC1 66
> +#define CLK_BUS_MMC2 67
> +#define CLK_BUS_UART0 68
> +#define CLK_BUS_UART1 69
> +#define CLK_BUS_UART2 70
> +#define CLK_BUS_UART3 71
> +#define CLK_BUS_UART4 72
> +#define CLK_BUS_UART5 73
> +#define CLK_BUS_I2C0 74
> +#define CLK_BUS_I2C1 75
> +#define CLK_BUS_I2C2 76
> +#define CLK_BUS_I2C3 77
> +#define CLK_BUS_I2C4 78
> +#define CLK_SPI0 79
> +#define CLK_SPI1 80
> +#define CLK_BUS_SPI0 81
> +#define CLK_BUS_SPI1 82
> +#define CLK_EMAC_25M 83
> +#define CLK_BUS_EMAC0 84
> +#define CLK_BUS_EMAC1 85
> +#define CLK_TS 86
> +#define CLK_BUS_TS 87
> +#define CLK_BUS_THS 88
> +#define CLK_SPDIF 89
> +#define CLK_BUS_SPDIF 90
> +#define CLK_DMIC 91
> +#define CLK_BUS_DMIC 92
> +#define CLK_AUDIO_CODEC_1X 93
> +#define CLK_AUDIO_CODEC_4X 94
> +#define CLK_BUS_AUDIO_CODEC 95
> +#define CLK_AUDIO_HUB 96
> +#define CLK_BUS_AUDIO_HUB 97
> +#define CLK_USB_OHCI0 98
> +#define CLK_USB_PHY0 99
> +#define CLK_USB_OHCI1 100
> +#define CLK_USB_PHY1 101
> +#define CLK_USB_OHCI2 102
> +#define CLK_USB_PHY2 103
> +#define CLK_USB_OHCI3 104
> +#define CLK_USB_PHY3 105
> +#define CLK_BUS_OHCI0 106
> +#define CLK_BUS_OHCI1 107
> +#define CLK_BUS_OHCI2 108
> +#define CLK_BUS_OHCI3 109
> +#define CLK_BUS_EHCI0 110
> +#define CLK_BUS_EHCI1 111
> +#define CLK_BUS_EHCI2 112
> +#define CLK_BUS_EHCI3 113
> +#define CLK_BUS_OTG 114
> +#define CLK_BUS_KEYADC 115
> +#define CLK_HDMI 116
> +#define CLK_HDMI_SLOW 117
> +#define CLK_HDMI_CEC 118
> +#define CLK_BUS_HDMI 119
> +#define CLK_BUS_TCON_TOP 120
> +#define CLK_TCON_TV0 121
> +#define CLK_BUS_TCON_TV0 122
> +#define CLK_HDCP 123
> +#define CLK_BUS_HDCP 124
> +
> +#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */
> diff --git a/include/dt-bindings/reset/sun50i-h616-ccu.h
> b/include/dt-bindings/reset/sun50i-h616-ccu.h
> new file mode 100644
> index 000000000000..1c992cfbbbab
> --- /dev/null
> +++ b/include/dt-bindings/reset/sun50i-h616-ccu.h
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
> + */
> +
> +#ifndef _DT_BINDINGS_RESET_SUN50I_H616_H_
> +#define _DT_BINDINGS_RESET_SUN50I_H616_H_
> +
> +#define RST_MBUS 0
> +#define RST_BUS_DE 1
> +#define RST_BUS_DEINTERLACE 2
> +#define RST_BUS_GPU 3
> +#define RST_BUS_CE 4
> +#define RST_BUS_VE 5
> +#define RST_BUS_DMA 6
> +#define RST_BUS_HSTIMER 7
> +#define RST_BUS_DBG 8
> +#define RST_BUS_PSI 9
> +#define RST_BUS_PWM 10
> +#define RST_BUS_IOMMU 11
> +#define RST_BUS_DRAM 12
> +#define RST_BUS_NAND 13
> +#define RST_BUS_MMC0 14
> +#define RST_BUS_MMC1 15
> +#define RST_BUS_MMC2 16
> +#define RST_BUS_UART0 17
> +#define RST_BUS_UART1 18
> +#define RST_BUS_UART2 19
> +#define RST_BUS_UART3 20
> +#define RST_BUS_UART4 21
> +#define RST_BUS_UART5 22
> +#define RST_BUS_I2C0 23
> +#define RST_BUS_I2C1 24
> +#define RST_BUS_I2C2 25
> +#define RST_BUS_I2C3 26
> +#define RST_BUS_I2C4 27
> +#define RST_BUS_SPI0 28
> +#define RST_BUS_SPI1 29
> +#define RST_BUS_EMAC0 30
> +#define RST_BUS_EMAC1 31
> +#define RST_BUS_TS 32
> +#define RST_BUS_THS 33
> +#define RST_BUS_SPDIF 34
> +#define RST_BUS_DMIC 35
> +#define RST_BUS_AUDIO_CODEC 36
> +#define RST_BUS_AUDIO_HUB 37
> +#define RST_USB_PHY0 38
> +#define RST_USB_PHY1 39
> +#define RST_USB_PHY2 40
> +#define RST_USB_PHY3 41
> +#define RST_BUS_OHCI0 42
> +#define RST_BUS_OHCI1 43
> +#define RST_BUS_OHCI2 44
> +#define RST_BUS_OHCI3 45
> +#define RST_BUS_EHCI0 46
> +#define RST_BUS_EHCI1 47
> +#define RST_BUS_EHCI2 48
> +#define RST_BUS_EHCI3 49
> +#define RST_BUS_OTG 50
> +#define RST_BUS_HDMI 51
> +#define RST_BUS_HDMI_SUB 52
> +#define RST_BUS_TCON_TOP 53
> +#define RST_BUS_TCON_TV0 54
> +#define RST_BUS_HDCP 55
> +#define RST_BUS_KEYADC 56
> +
> +#endif /* _DT_BINDINGS_RESET_SUN50I_H616_H_ */
> --
> 2.17.5
>
More information about the linux-arm-kernel
mailing list