[PATCH 2/3] dt-bindings: pinctrl: Added binding for ZynqMP pinctrl driver
Sai Krishna Potthuri
lakshmis at xilinx.com
Thu Dec 10 06:00:41 EST 2020
Hi Rob,
Thanks for the review
> -----Original Message-----
> From: Rob Herring <robh at kernel.org>
> Sent: Wednesday, December 9, 2020 10:33 PM
> To: Sai Krishna Potthuri <lakshmis at xilinx.com>
> Cc: Linus Walleij <linus.walleij at linaro.org>; Michal Simek
> <michals at xilinx.com>; Greg Kroah-Hartman <gregkh at linuxfoundation.org>;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> devicetree at vger.kernel.org; linux-gpio at vger.kernel.org; git
> <git at xilinx.com>; saikrishna12468 at gmail.com
> Subject: Re: [PATCH 2/3] dt-bindings: pinctrl: Added binding for ZynqMP
> pinctrl driver
>
> On Wed, Dec 09, 2020 at 02:14:13PM +0530, Sai Krishna Potthuri wrote:
> > Added documentation and dt-bindings file which contains MIO pin
> > configuration defines for Xilinx ZynqMP pinctrl driver.
> >
> > Signed-off-by: Sai Krishna Potthuri
> > <lakshmi.sai.krishna.potthuri at xilinx.com>
> > ---
> > .../bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml | 329
> > ++++++++++++++++++ include/dt-bindings/pinctrl/pinctrl-zynqmp.h |
> > 29 ++
> > 2 files changed, 358 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
> > create mode 100644 include/dt-bindings/pinctrl/pinctrl-zynqmp.h
> >
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
> > b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
> > new file mode 100644
> > index 000000000000..dd0c8c12714f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.ya
> > +++ ml
> > @@ -0,0 +1,329 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Xilinx ZynqMP Pinctrl
> > +
> > +maintainers:
> > + - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri at xilinx.com>
> > + - Rajan Vaja <rajan.vaja at xilinx.com>
> > +
> > +description: |
> > + Please refer to pinctrl-bindings.txt in this directory for details
> > +of the
> > + common pinctrl bindings used by client devices, including the
> > +meaning of the
> > + phrase "pin configuration node".
> > +
> > + ZynqMP's pin configuration nodes act as a container for an
> > + arbitrary number of subnodes. Each of these subnodes represents
> > + some desired configuration for a pin, a group, or a list of pins or
> > + groups. This configuration can include the mux function to select
> > + on those pin(s)/group(s), and various pin configuration parameters, such
> as pull-up, slew rate, etc.
> > +
> > + Each configuration node can consist of multiple nodes describing
> > + the pinmux and pinconf options. Those nodes can be pinmux nodes or
> pinconf nodes.
> > +
> > + The name of each subnode is not important; all subnodes should be
> > + enumerated and processed purely based on their content.
> > +
> > +properties:
> > + compatible:
> > + const: xlnx,zynqmp-pinctrl
> > +
> > +patternProperties:
> > + '^(.*-)?(default|gpio)$':
> > + type: object
> > + patternProperties:
> > + '^(.*-)?mux$':
> > + type: object
> > + description:
> > + Pinctrl node's client devices use subnodes for pin muxes,
> > + which in turn use below standard properties.
> > + $ref: pinmux-node.yaml#
> > +
> > + properties:
> > + groups:
> > + description:
> > + List of groups to select (either this or "pins" must be
> > + specified), available groups for this subnode.
> > + enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp,
> > + ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp,
> > + gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp,
> > + mdio1_1_grp, mdio2_0_grp, mdio3_0_grp,
> > + qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp,
> > + spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp,
> > + spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp,
> > + spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp,
> > + spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp,
> > + spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp,
> > + spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp,
> > + spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp,
> > + spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp,
> > + spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp,
> > + spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp,
> > + spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp,
> > + spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp,
> > + spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp,
> > + spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp,
> > + spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp,
> > + spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp,
> > + sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
> > + sdio0_3_grp, sdio0_4_grp, sdio0_5_grp,
> > + sdio0_6_grp, sdio0_7_grp, sdio0_8_grp,
> > + sdio0_9_grp, sdio0_10_grp, sdio0_11_grp,
> > + sdio0_12_grp, sdio0_13_grp, sdio0_14_grp,
> > + sdio0_15_grp, sdio0_16_grp, sdio0_17_grp,
> > + sdio0_18_grp, sdio0_19_grp, sdio0_20_grp,
> > + sdio0_21_grp, sdio0_22_grp, sdio0_23_grp,
> > + sdio0_24_grp, sdio0_25_grp, sdio0_26_grp,
> > + sdio0_27_grp, sdio0_28_grp, sdio0_29_grp,
> > + sdio0_30_grp, sdio0_31_grp, sdio0_32_grp,
> > + sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp,
> > + sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp,
> > + sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp,
> > + sdio1_0_grp, sdio1_1_grp, sdio1_2_grp,
> > + sdio1_3_grp, sdio1_4_grp, sdio1_5_grp,
> > + sdio1_6_grp, sdio1_7_grp, sdio1_8_grp,
> > + sdio1_9_grp, sdio1_10_grp, sdio1_11_grp,
> > + sdio1_12_grp, sdio1_13_grp, sdio1_14_grp,
> > + sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp,
> > + sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp,
> > + sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp,
> > + nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp,
> > + nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp,
> > + can0_1_grp, can0_2_grp, can0_3_grp,
> > + can0_4_grp, can0_5_grp, can0_6_grp,
> > + can0_7_grp, can0_8_grp, can0_9_grp,
> > + can0_10_grp, can0_11_grp, can0_12_grp,
> > + can0_13_grp, can0_14_grp, can0_15_grp,
> > + can0_16_grp, can0_17_grp, can0_18_grp,
> > + can1_0_grp, can1_1_grp, can1_2_grp,
> > + can1_3_grp, can1_4_grp, can1_5_grp,
> > + can1_6_grp, can1_7_grp, can1_8_grp,
> > + can1_9_grp, can1_10_grp, can1_11_grp,
> > + can1_12_grp, can1_13_grp, can1_14_grp,
> > + can1_15_grp, can1_16_grp, can1_17_grp,
> > + can1_18_grp, can1_19_grp, uart0_0_grp,
> > + uart0_1_grp, uart0_2_grp, uart0_3_grp,
> > + uart0_4_grp, uart0_5_grp, uart0_6_grp,
> > + uart0_7_grp, uart0_8_grp, uart0_9_grp,
> > + uart0_10_grp, uart0_11_grp, uart0_12_grp,
> > + uart0_13_grp, uart0_14_grp, uart0_15_grp,
> > + uart0_16_grp, uart0_17_grp, uart0_18_grp,
> > + uart1_0_grp, uart1_1_grp, uart1_2_grp,
> > + uart1_3_grp, uart1_4_grp, uart1_5_grp,
> > + uart1_6_grp, uart1_7_grp, uart1_8_grp,
> > + uart1_9_grp, uart1_10_grp, uart1_11_grp,
> > + uart1_12_grp, uart1_13_grp, uart1_14_grp,
> > + uart1_15_grp, uart1_16_grp, uart1_17_grp,
> > + uart1_18_grp, i2c0_0_grp, i2c0_1_grp,
> > + i2c0_2_grp, i2c0_3_grp, i2c0_4_grp,
> > + i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
> > + i2c0_8_grp, i2c0_9_grp, i2c0_10_grp,
> > + i2c0_11_grp, i2c0_12_grp, i2c0_13_grp,
> > + i2c0_14_grp, i2c0_15_grp, i2c0_16_grp,
> > + i2c0_17_grp, i2c0_18_grp, i2c1_0_grp,
> > + i2c1_1_grp, i2c1_2_grp, i2c1_3_grp,
> > + i2c1_4_grp, i2c1_5_grp, i2c1_6_grp,
> > + i2c1_7_grp, i2c1_8_grp, i2c1_9_grp,
> > + i2c1_10_grp, i2c1_11_grp, i2c1_12_grp,
> > + i2c1_13_grp, i2c1_14_grp, i2c1_15_grp,
> > + i2c1_16_grp, i2c1_17_grp, i2c1_18_grp,
> > + i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp,
> > + ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp,
> > + ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp,
> > + ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp,
> > + ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp,
> > + ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp,
> > + ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp,
> > + ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp,
> > + ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp,
> > + ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp,
> > + ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp,
> > + ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp,
> > + ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp,
> > + ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp,
> > + ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp,
> > + ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp,
> > + ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp,
> > + ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp,
> > + ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp,
> > + ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp,
> > + ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp,
> > + ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp,
> > + ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp,
> > + ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp,
> > + ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp,
> > + swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp,
> > + swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp,
> > + swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp,
> > + swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp,
> > + swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp,
> > + swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp,
> > + swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp,
> > + swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp,
> > + swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp,
> > + swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp,
> > + swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp,
> > + swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp,
> > + swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp,
> > + swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp,
> > + swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp,
> > + swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp,
> > + swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp,
> > + gpio0_1_grp, gpio0_2_grp, gpio0_3_grp,
> > + gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
> > + gpio0_7_grp, gpio0_8_grp, gpio0_9_grp,
> > + gpio0_10_grp, gpio0_11_grp, gpio0_12_grp,
> > + gpio0_13_grp, gpio0_14_grp, gpio0_15_grp,
> > + gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
> > + gpio0_19_grp, gpio0_20_grp, gpio0_21_grp,
> > + gpio0_22_grp, gpio0_23_grp, gpio0_24_grp,
> > + gpio0_25_grp, gpio0_26_grp, gpio0_27_grp,
> > + gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
> > + gpio0_31_grp, gpio0_32_grp, gpio0_33_grp,
> > + gpio0_34_grp, gpio0_35_grp, gpio0_36_grp,
> > + gpio0_37_grp, gpio0_38_grp, gpio0_39_grp,
> > + gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
> > + gpio0_43_grp, gpio0_44_grp, gpio0_45_grp,
> > + gpio0_46_grp, gpio0_47_grp, gpio0_48_grp,
> > + gpio0_49_grp, gpio0_50_grp, gpio0_51_grp,
> > + gpio0_52_grp, gpio0_53_grp, gpio0_54_grp,
> > + gpio0_55_grp, gpio0_56_grp, gpio0_57_grp,
> > + gpio0_58_grp, gpio0_59_grp, gpio0_60_grp,
> > + gpio0_61_grp, gpio0_62_grp, gpio0_63_grp,
> > + gpio0_64_grp, gpio0_65_grp, gpio0_66_grp,
> > + gpio0_67_grp, gpio0_68_grp, gpio0_69_grp,
> > + gpio0_70_grp, gpio0_71_grp, gpio0_72_grp,
> > + gpio0_73_grp, gpio0_74_grp, gpio0_75_grp,
> > + gpio0_76_grp, gpio0_77_grp, usb0_0_grp,
> > + usb1_0_grp, pmu0_0_grp, pmu0_1_grp,
> > + pmu0_2_grp, pmu0_3_grp, pmu0_4_grp,
> > + pmu0_5_grp, pmu0_6_grp, pmu0_7_grp,
> > + pmu0_8_grp, pmu0_9_grp, pmu0_10_grp,
> > + pmu0_11_grp, pcie0_0_grp, pcie0_1_grp,
> > + pcie0_2_grp, pcie0_3_grp, pcie0_4_grp,
> > + pcie0_5_grp, pcie0_6_grp, pcie0_7_grp,
> > + csu0_0_grp, csu0_1_grp, csu0_2_grp,
> > + csu0_3_grp, csu0_4_grp, csu0_5_grp,
> > + csu0_6_grp, csu0_7_grp, csu0_8_grp,
> > + csu0_9_grp, csu0_10_grp, csu0_11_grp,
> > + dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp,
> > + dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp,
> > + pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp,
> > + pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp,
> > + trace0_1_grp, trace0_clk_1_grp, trace0_2_grp,
> > + trace0_clk_2_grp, testscan0_0_grp]
> > +
> > + function:
> > + description:
> > + Specify the alternative function to be configured for the
> > + given pin groups.
> > + enum: [ethernet0, ethernet1, ethernet2, ethernet3, gemtsu0, usb0,
> usb1, mdio0,
> > + mdio1, mdio2, mdio3, qspi0, qspi_fbclk, qspi_ss, spi0, spi1,
> spi0_ss,
> > + spi1_ss, sdio0, sdio0_pc, sdio0_wp, sdio0_cd, sdio1, sdio1_pc,
> sdio1_wp,
> > + sdio1_cd, nand0, nand0_ce, nand0_rb, nand0_dqs, can0, can1,
> uart0, uart1,
> > + i2c0, i2c1, ttc0_clk, ttc0_wav, ttc1_clk, ttc1_wav, ttc2_clk,
> ttc2_wav,
> > + ttc3_clk, ttc3_wav, swdt0_clk, swdt0_rst, swdt1_clk, swdt1_rst,
> gpio0, pmu0,
> > + pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk,
> > + testscan0]
> > +
> > + required:
> > + - groups
> > + - function
> > +
> > + additionalProperties: false
> > +
> > + '^(.*-)?conf$':
> > + type: object
> > + description:
> > + Pinctrl node's client devices use subnodes for pin configurations,
> > + which in turn use the standard properties below.
> > + $ref: pincfg-node.yaml#
> > +
> > + properties:
> > + groups:
> > + description:
> > + List of pin groups as mentioned above (either this or "pins" must
> > + be specified).
> > +
> > + pins:
> > + description:
> > + List of pin names to select in this subnode (either this or "groups"
> must
> > + be specified)
> > + enum: [MIO0, MIO1, .., MIO18, MIO19,.., MIO77]
>
> '..' is a pin name? Use 'pattern':
>
> pattern: '^MIO([0-9]|[0-7][0-9])$'
Ok, I will update in v2
>
> > +
> > + bias-pull-up: true
> > +
> > + bias-pull-down: true
> > +
> > + bias-disable: true
> > +
> > + slew-rate:
> > + description:
> > + Selects the slew rate for the specified pins.
>
> Don't need description for common properties.
Ok, I will remove this in v2
>
> > + enum: [0, 1]
> > +
> > + drive-strength:
> > + description:
> > + Selects the drive strength for MIO pins, in mA.
> > + enum: [2, 4, 8, 12]
> > +
> > + io-standard:
>
> Not a common property, needs a type ref. Should have had a vendor prefix
> too, but I guess this is carried over from Zynq.
Ok, I will add type ref.
Yes, it is there from Zynq. Is it fine to go with the same name or vendor
prefix should be added for ZynqMP? Please suggest.
>
> > + description:
> > + Selects the IO standard for MIO pins, this is driver specific.
>
> What is io standard?
It is more of selecting between LVCOS 3.3V and LVCMOS 1.8V.
Macros for these two are defined in dt-binding file mentioned below.
>
> Looks like the same thing as 'power-source' though.
>
> > + enum: [0, 1]
> > +
> > + schmitt-cmos:
>
> Needs a vendor prefix and type.
Ok, I will add vendor prefix here and type ref.
>
> > + description:
> > + Selects the schmitt or cmos input for MIO pins, this is driver
> specific.
> > + enum: [0, 1]
>
> Is there a default if not present because you didn't make it required.
> If there a default, then you just need this to be boolean for the non-default.
>
> Or doesn't input-schmitt-disable work for you?
This property can be optional as we have some default value from design.
Based on the requirement this can be changed to CMOS(0) or SCHMITT (1).
>
> > +
> > + additionalProperties: false
> > +
> > + additionalProperties: false
> > +
> > +required:
> > + - compatible
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
> > + zynqmp_firmware: zynqmp-firmware {
> > + pinctrl0: pinctrl {
> > + compatible = "xlnx,zynqmp-pinctrl";
> > +
> > + pinctrl_uart1_default: uart1-default {
> > + mux {
> > + groups = "uart0_4_grp";
> > + function = "uart0";
> > + };
> > +
> > + conf {
> > + groups = "uart0_4_grp";
> > + slew-rate = <SLEW_RATE_SLOW>;
> > + io-standard = <IO_STANDARD_LVCMOS18>;
> > + };
> > +
> > + rx-conf {
> > + pins = "MIO18";
> > + bias-pull-up;
> > + };
> > +
> > + tx-conf {
> > + pins = "MIO19";
> > + bias-disable;
> > + schmitt-cmos = <PIN_INPUT_TYPE_CMOS>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + uart1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart1_default>;
> > + };
> > +
> > +...
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-zynqmp.h
> > b/include/dt-bindings/pinctrl/pinctrl-zynqmp.h
> > new file mode 100644
> > index 000000000000..509190aa45f7
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-zynqmp.h
> > @@ -0,0 +1,29 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * MIO pin configuration defines for Xilinx ZynqMP
> > + *
> > + * Copyright (C) 2020 Xilinx, Inc.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_ZYNQMP_H #define
> > +_DT_BINDINGS_PINCTRL_ZYNQMP_H
> > +
> > +/* Bit value for IO standards */
> > +#define IO_STANDARD_LVCMOS33 0
> > +#define IO_STANDARD_LVCMOS18 1
> > +
> > +/* Bit values for Slew Rates */
> > +#define SLEW_RATE_FAST 0
> > +#define SLEW_RATE_SLOW 1
> > +
> > +/* Bit values for Pin inputs */
> > +#define PIN_INPUT_TYPE_CMOS 0
> > +#define PIN_INPUT_TYPE_SCHMITT 1
> > +
> > +/* Bit values for drive control*/
> > +#define DRIVE_STRENGTH_2MA 2
> > +#define DRIVE_STRENGTH_4MA 4
> > +#define DRIVE_STRENGTH_8MA 8
> > +#define DRIVE_STRENGTH_12MA 12
>
> Drop this. Define names with the value of the define in them are kind of
> pointless. Plus this is a common property, so if we wanted defines for it we'd
> already have them.
Ok, I will remove these defines.
Regards,
Sai Krishna
>
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_ZYNQMP_H */
> > --
> > 2.17.1
> >
More information about the linux-arm-kernel
mailing list