[PATCH] arm64: dts: bitmain: Use generic "ngpios" rather than "snps, nr-gpios"

[Manivannan Sadhasivam]

From: Jisheng Zhang <Jisheng.Zhang at synaptics.com>

This is to remove similar errors as below:

OF: /.../gpio-port at 0: could not find phandle

Commit 7569486d79ae ("gpio: dwapb: Add ngpios DT-property support")
explained the reason of above errors well and added the generic
"ngpios" property, let's use it.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang at synaptics.com>
Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
---

Arnd, Olof: I just have this single patch for Bitmain platform this cycle.
So sending it directly.

 arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index fa6e6905f588..53a9b76057aa 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -127,7 +127,7 @@ porta: gpio-controller at 0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -145,7 +145,7 @@ portb: gpio-controller at 0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -163,7 +163,7 @@ portc: gpio-controller at 0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
-- 
2.25.1