[PATCH 0/6] iio:pressure:ms5637: add ms5803 support

[Alexandre Belloni]

Hello,

This series adds support for the Measurement Specialities ms5803. It is
very similar to the ms5805 but has a different PROM layout (which I
suspect predates the ms5805 PROM layout). Also it supports less
frequency sampling options.

After a bit of preparatory work in the ms5637 driver and its common
library, mainly to handle the PROM layou and sample frequencies, adding
support is trivial.

Alexandre Belloni (6):
  iio:pressure:ms5637: switch to probe_new
  iio:pressure:ms5637: introduce hardware differentiation
  iio:pressure:ms5637: limit available sample frequencies
  iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper
  iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM
    layout
  iio:pressure:ms5637: add ms5803 support

 .../devicetree/bindings/trivial-devices.yaml  |  2 +
 .../iio/common/ms_sensors/ms_sensors_i2c.c    | 76 +++++++++++++++----
 .../iio/common/ms_sensors/ms_sensors_i2c.h    | 15 +++-
 drivers/iio/pressure/ms5637.c                 | 73 +++++++++++++-----
 4 files changed, 128 insertions(+), 38 deletions(-)

-- 
2.28.0