[PATCH v5 04/27] dt-bindings: memory: mediatek: Add domain definition

[Yong Wu]

In the latest SoC, there are several HW IP require a sepecial iova
range, mainly CCU and VPU has this requirement. Take CCU as a example,
CCU require its iova locate in the range(0x4000_0000 ~ 0x43ff_ffff).

In this patch we add a domain definition for the special port. In the
example of CCU, If we preassign CCU port in domain1, then iommu driver
will prepare a independent iommu domain of the special iova range for it,
then the iova got from dma_alloc_attrs(ccu-dev) will locate in its special
range.

This is a preparing patch for multi-domain support.

Signed-off-by: Yong Wu <yong.wu at mediatek.com>
Acked-by: Krzysztof Kozlowski <krzk at kernel.org>
Acked-by: Rob Herring <robh at kernel.org>
---
 include/dt-bindings/memory/mtk-smi-larb-port.h | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/include/dt-bindings/memory/mtk-smi-larb-port.h b/include/dt-bindings/memory/mtk-smi-larb-port.h
index 7d64103209af..2d4c973c174f 100644
--- a/include/dt-bindings/memory/mtk-smi-larb-port.h
+++ b/include/dt-bindings/memory/mtk-smi-larb-port.h
@@ -7,9 +7,16 @@
 #define __DT_BINDINGS_MEMORY_MTK_MEMORY_PORT_H_
 
 #define MTK_LARB_NR_MAX			32
+#define MTK_M4U_DOM_NR_MAX		8
+
+#define MTK_M4U_DOM_ID(domid, larb, port)	\
+	(((domid) & 0x7) << 16 | (((larb) & 0x1f) << 5) | ((port) & 0x1f))
+
+/* The default dom id is 0. */
+#define MTK_M4U_ID(larb, port)		MTK_M4U_DOM_ID(0, larb, port)
 
-#define MTK_M4U_ID(larb, port)		(((larb) << 5) | (port))
 #define MTK_M4U_TO_LARB(id)		(((id) >> 5) & 0x1f)
 #define MTK_M4U_TO_PORT(id)		((id) & 0x1f)
+#define MTK_M4U_TO_DOM(id)		(((id) >> 16) & 0x7)
 
 #endif
-- 
2.18.0