[PATCH v2 0/4] Initial support for phyBOARD-Pollux i.MX8MP

[Teresa Remmet]

Second version for the initial support for the SoM phyCORE-i.MX8MP
and the carrier board phyBOARD-Pollux.

Changes in v2:
- Add rv3028 as module instead of buildin in defconfig
- updated commit message of rv3028 accordingly
- changed entries of device tree binding documentation to "const" 
  and fixed order
- fixed led dimmer node name
- removed rtc clock node
- fixed pmic node name
- removed reg entries in pmic regulator nodes
- removed clock entry from rtc node
- moved muxing of enable gpio for sd-card regulator to the proper node
- squashed imx8mp-phyboard-pollux.dtsi into imx8mp-phyboard-pollux-rdk.dts

Teresa

Teresa Remmet (4):
  arm64: defconfig: Enable rv3028 i2c rtc driver
  arm64: defconfig: Enable PCA9532 support
  bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings
  arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP

 Documentation/devicetree/bindings/arm/fsl.yaml     |   6 +
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 .../dts/freescale/imx8mp-phyboard-pollux-rdk.dts   | 166 ++++++++++++
 .../boot/dts/freescale/imx8mp-phycore-som.dtsi     | 296 +++++++++++++++++++++
 arch/arm64/configs/defconfig                       |   2 +
 5 files changed, 471 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi

-- 
2.7.4