[PATCH 2/4] phy: Add LVDS configuration options

[Laurent Pinchart]

Hi Liu,

Thank you for the patch.

On Fri, Dec 04, 2020 at 03:33:42PM +0800, Liu Ying wrote:
> This patch allows LVDS PHYs to be configured through
> the generic functions and through a custom structure
> added to the generic union.
> 
> The parameters added here are based on common LVDS PHY
> implementation practices.  The set of parameters
> should cover all potential users.
> 
> Cc: Kishon Vijay Abraham I <kishon at ti.com>
> Cc: Vinod Koul <vkoul at kernel.org>
> Cc: NXP Linux Team <linux-imx at nxp.com>
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
>  include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/phy/phy.h      |  4 ++++
>  2 files changed, 52 insertions(+)
>  create mode 100644 include/linux/phy/phy-lvds.h
> 
> diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
> new file mode 100644
> index 00000000..1b5b9d6
> --- /dev/null
> +++ b/include/linux/phy/phy-lvds.h
> @@ -0,0 +1,48 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2020 NXP
> + */
> +
> +#ifndef __PHY_LVDS_H_
> +#define __PHY_LVDS_H_
> +
> +/**
> + * struct phy_configure_opts_lvds - LVDS configuration set
> + *
> + * This structure is used to represent the configuration state of a
> + * LVDS phy.
> + */
> +struct phy_configure_opts_lvds {
> +	/**
> +	 * @bits_per_lane_and_dclk_cycle:
> +	 *
> +	 * Number of bits per data lane and differential clock cycle.
> +	 */
> +	unsigned int bits_per_lane_and_dclk_cycle;

I see in patch 4/4 that you only support 7, can the value be any
different ?

> +
> +	/**
> +	 * @differential_clk_rate:
> +	 *
> +	 * Clock rate, in Hertz, of the LVDS differential clock.
> +	 */
> +	unsigned long differential_clk_rate;
> +
> +	/**
> +	 * @lanes:
> +	 *
> +	 * Number of active, consecutive, data lanes, starting from
> +	 * lane 0, used for the transmissions.
> +	 */
> +	unsigned int lanes;
> +
> +	/**
> +	 * @is_slave:
> +	 *
> +	 * Boolean, true if the phy is a slave which works together
> +	 * with a master phy to support dual link transmission,
> +	 * otherwise a regular phy or a master phy.
> +	 */
> +	bool is_slave;
> +};
> +
> +#endif /* __PHY_LVDS_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index e435bdb..d450b44 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
>  #include <linux/regulator/consumer.h>
>  
>  #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-lvds.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>  
>  struct phy;
> @@ -51,10 +52,13 @@ enum phy_mode {
>   *		the MIPI_DPHY phy mode.
>   * @dp:		Configuration set applicable for phys supporting
>   *		the DisplayPort protocol.
> + * @lvds:	Configuration set applicable for phys supporting
> + *		the LVDS phy mode.
>   */
>  union phy_configure_opts {
>  	struct phy_configure_opts_mipi_dphy	mipi_dphy;
>  	struct phy_configure_opts_dp		dp;
> +	struct phy_configure_opts_lvds		lvds;
>  };
>  
>  /**

-- 
Regards,

Laurent Pinchart