[PATCH] arm64: dts: broadcom: bcm4908: use proper NAND binding

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

BCM4908 has controller that needs different IRQ handling just like the
BCM63138. Describe it properly.

On Linux this change fixes:
brcmstb_nand ff801800.nand: timeout waiting for command 0x9
brcmstb_nand ff801800.nand: intfc status d0000000

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index f873dc44ce9c..55d9b56ac749 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -164,7 +164,7 @@ uart0: serial at 640 {
 		nand at 1800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
 			reg = <0x1800 0x600>, <0x2000 0x10>;
 			reg-names = "nand", "nand-int-base";
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.26.2