[PATCH v3 3/3] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add poweroff node

[Michael Klein]

Add add devicetree information for the regulator-poweroff driver.

Signed-off-by: Michael Klein <michael at fossekall.de>
---
This patch depends on the regulator names added in
https://lore.kernel.org/linux-arm-kernel/20201130183841.136708-1-michael@fossekall.de/

 arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index b43028f9e6df..408c6e581700 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -86,6 +86,13 @@ reg_vcc1v2: vcc1v2 {
 		vin-supply = <&reg_vcc5v0>;
 	};
 
+	poweroff {
+		compatible = "regulator-poweroff";
+		regulator-names = "vcc1v2", "vcc-dram";
+		vcc1v2-supply = <&reg_vcc1v2>;
+		vcc-dram-supply = <&reg_vcc_dram>;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-- 
2.29.2