[PATCH v1, 3/5] mailbox: mediatek: add control_by_sw private data

[Nicolas Boichat]

On Sat, Dec 5, 2020 at 12:18 PM Yongqiang Niu
<yongqiang.niu at mediatek.com> wrote:
>
> add control_by_sw private data

Can you describe in a bit more details what this means?

>
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 5665b6e..1c01fe0 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -36,6 +36,8 @@
>  #define CMDQ_THR_WAIT_TOKEN            0x30
>  #define CMDQ_THR_PRIORITY              0x40
>
> +#define GCE_GCTL_VALUE                 0x48
> +
>  #define CMDQ_THR_ACTIVE_SLOT_CYCLES    0x3200
>  #define CMDQ_THR_ENABLED               0x1
>  #define CMDQ_THR_DISABLED              0x0
> @@ -76,11 +78,13 @@ struct cmdq {
>         struct clk              *clock;
>         bool                    suspended;
>         u8                      shift_pa;
> +       bool                    control_by_sw;
>  };
>
>  struct gce_plat {
>         u32 thread_nr;
>         u8 shift;
> +       bool control_by_sw;
>  };
>
>  u8 cmdq_get_shift_pa(struct mbox_chan *chan)
> @@ -121,6 +125,8 @@ static void cmdq_init(struct cmdq *cmdq)
>         int i;
>
>         WARN_ON(clk_enable(cmdq->clock) < 0);
> +       if (cmdq->control_by_sw)
> +               writel(0x7, cmdq->base + GCE_GCTL_VALUE);

What is 0x7? Define a macro for these bits?

>         writel(CMDQ_THR_ACTIVE_SLOT_CYCLES, cmdq->base + CMDQ_THR_SLOT_CYCLES);
>         for (i = 0; i <= CMDQ_MAX_EVENT; i++)
>                 writel(i, cmdq->base + CMDQ_SYNC_TOKEN_UPDATE);
> @@ -536,6 +542,7 @@ static int cmdq_probe(struct platform_device *pdev)
>
>         cmdq->thread_nr = plat_data->thread_nr;
>         cmdq->shift_pa = plat_data->shift;
> +       cmdq->control_by_sw = plat_data->control_by_sw;
>         cmdq->irq_mask = GENMASK(cmdq->thread_nr - 1, 0);
>         err = devm_request_irq(dev, cmdq->irq, cmdq_irq_handler, IRQF_SHARED,
>                                "mtk_cmdq", cmdq);
> --
> 1.8.1.1.dirty
>