[PATCH v5 2/4] usb: dwc3: add imx8mp dwc3 glue layer driver
Jun Li
jun.li at nxp.com
Thu Dec 3 21:07:16 EST 2020
Hi
> -----Original Message-----
> From: Jun Li <jun.li at nxp.com>
> Sent: Saturday, October 3, 2020 8:02 PM
> To: robh+dt at kernel.org; shawnguo at kernel.org; balbi at kernel.org
> Cc: krzk at kernel.org; gregkh at linuxfoundation.org; s.hauer at pengutronix.de;
> kernel at pengutronix.de; festevam at gmail.com; dl-linux-imx
> <linux-imx at nxp.com>; Anson Huang <anson.huang at nxp.com>; Jun Li
> <jun.li at nxp.com>; Aisheng Dong <aisheng.dong at nxp.com>; Peng Fan
> <peng.fan at nxp.com>; Andy Duan <fugang.duan at nxp.com>; Horia Geanta
> <horia.geanta at nxp.com>; Joakim Zhang <qiangqing.zhang at nxp.com>; Peter Chen
> <peter.chen at nxp.com>; devicetree at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org
> Subject: [PATCH v5 2/4] usb: dwc3: add imx8mp dwc3 glue layer driver
>
> imx8mp SoC integrate dwc3 3.30b IP and has some customizations to support
> low power, which has a seprated wakeup irq and additional logic to wakeup
> usb from low power mode both for host mode and device mode.
>
> Signed-off-by: Li Jun <jun.li at nxp.com>
> ---
> drivers/usb/dwc3/Kconfig | 10 ++
> drivers/usb/dwc3/Makefile | 1 +
> drivers/usb/dwc3/dwc3-imx8mp.c | 363
> +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 374 insertions(+)
>
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index
> 7a23045..2133acf 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -139,4 +139,14 @@ config USB_DWC3_QCOM
> for peripheral mode support.
> Say 'Y' or 'M' if you have one such device.
>
> +config USB_DWC3_IMX8MP
> + tristate "NXP iMX8MP Platform"
> + depends on OF && COMMON_CLK
> + depends on (ARCH_MXC && ARM64) || COMPILE_TEST
> + default USB_DWC3
> + help
> + NXP iMX8M Plus SoC use DesignWare Core IP for USB2/3
> + functionality.
> + Say 'Y' or 'M' if you have one such device.
> +
> endif
> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index
> ae86da0..2259f88 100644
> --- a/drivers/usb/dwc3/Makefile
> +++ b/drivers/usb/dwc3/Makefile
> @@ -51,3 +51,4 @@ obj-$(CONFIG_USB_DWC3_MESON_G12A) +=
> dwc3-meson-g12a.o
> obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o
> obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
> obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
> +obj-$(CONFIG_USB_DWC3_IMX8MP) += dwc3-imx8mp.o
> diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c
> b/drivers/usb/dwc3/dwc3-imx8mp.c new file mode 100644 index
> 0000000..75f0042
> --- /dev/null
> +++ b/drivers/usb/dwc3/dwc3-imx8mp.c
> @@ -0,0 +1,363 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * dwc3-imx8mp.c - NXP imx8mp Specific Glue layer
> + *
> + * Copyright (c) 2020 NXP.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "core.h"
> +
> +/* USB wakeup registers */
> +#define USB_WAKEUP_CTRL 0x00
> +
> +/* Global wakeup interrupt enable, also used to clear interrupt */
> +#define USB_WAKEUP_EN BIT(31)
> +/* Wakeup from connect or disconnect, only for superspeed */
> +#define USB_WAKEUP_SS_CONN BIT(5)
> +/* 0 select vbus_valid, 1 select sessvld */
> +#define USB_WAKEUP_VBUS_SRC_SESS_VAL BIT(4)
> +/* Enable signal for wake up from u3 state */
> +#define USB_WAKEUP_U3_EN BIT(3)
> +/* Enable signal for wake up from id change */
> +#define USB_WAKEUP_ID_EN BIT(2)
> +/* Enable signal for wake up from vbus change */
> +#define USB_WAKEUP_VBUS_EN BIT(1)
> +/* Enable signal for wake up from dp/dm change */
> +#define USB_WAKEUP_DPDM_EN BIT(0)
> +
> +#define USB_WAKEUP_EN_MASK GENMASK(5, 0)
> +
> +struct dwc3_imx8mp {
> + struct device *dev;
> + struct platform_device *dwc3;
> + void __iomem *glue_base;
> + struct clk *hsio_clk;
> + struct clk *suspend_clk;
> + int irq;
> + bool pm_suspended;
> + bool wakeup_pending;
> +};
> +
> +static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx) {
> + struct dwc3 *dwc3 = platform_get_drvdata(dwc3_imx->dwc3);
> + u32 val;
> +
> + if (!dwc3)
> + return;
> +
> + val = readl(dwc3_imx->glue_base + USB_WAKEUP_CTRL);
> +
> + if ((dwc3->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc3->xhci)
> + val |= USB_WAKEUP_EN | USB_WAKEUP_SS_CONN |
> + USB_WAKEUP_U3_EN | USB_WAKEUP_DPDM_EN;
> + else if (dwc3->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE)
> + val |= USB_WAKEUP_EN | USB_WAKEUP_VBUS_EN |
> + USB_WAKEUP_VBUS_SRC_SESS_VAL;
> +
> + writel(val, dwc3_imx->glue_base + USB_WAKEUP_CTRL); }
> +
> +static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx) {
> + u32 val;
> +
> + val = readl(dwc3_imx->glue_base + USB_WAKEUP_CTRL);
> + val &= ~(USB_WAKEUP_EN | USB_WAKEUP_EN_MASK);
> + writel(val, dwc3_imx->glue_base + USB_WAKEUP_CTRL); }
> +
> +static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx) {
> + struct dwc3_imx8mp *dwc3_imx = _dwc3_imx;
> + struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3);
> +
> + if (!dwc3_imx->pm_suspended)
> + return IRQ_HANDLED;
> +
> + disable_irq_nosync(dwc3_imx->irq);
> + dwc3_imx->wakeup_pending = true;
> +
> + if ((dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc->xhci)
> + pm_runtime_resume(&dwc->xhci->dev);
> + else if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE)
> + pm_runtime_get(dwc->dev);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int dwc3_imx8mp_probe(struct platform_device *pdev) {
> + struct device *dev = &pdev->dev;
> + struct device_node *dwc3_np, *node = dev->of_node;
> + struct dwc3_imx8mp *dwc3_imx;
> + int err, irq;
> +
> + if (!node) {
> + dev_err(dev, "device node not found\n");
> + return -EINVAL;
> + }
> +
> + dwc3_imx = devm_kzalloc(dev, sizeof(*dwc3_imx), GFP_KERNEL);
> + if (!dwc3_imx)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, dwc3_imx);
> +
> + dwc3_imx->dev = dev;
> +
> + dwc3_imx->glue_base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(dwc3_imx->glue_base))
> + return PTR_ERR(dwc3_imx->glue_base);
> +
> + dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio");
> + if (IS_ERR(dwc3_imx->hsio_clk)) {
> + err = PTR_ERR(dwc3_imx->hsio_clk);
> + dev_err(dev, "Failed to get hsio clk, err=%d\n", err);
> + return err;
> + }
> +
> + err = clk_prepare_enable(dwc3_imx->hsio_clk);
> + if (err) {
> + dev_err(dev, "Failed to enable hsio clk, err=%d\n", err);
> + return err;
> + }
> +
> + dwc3_imx->suspend_clk = devm_clk_get(dev, "suspend");
> + if (IS_ERR(dwc3_imx->suspend_clk)) {
> + err = PTR_ERR(dwc3_imx->suspend_clk);
> + dev_err(dev, "Failed to get suspend clk, err=%d\n", err);
> + goto disable_hsio_clk;
> + }
> +
> + err = clk_prepare_enable(dwc3_imx->suspend_clk);
> + if (err) {
> + dev_err(dev, "Failed to enable suspend clk, err=%d\n", err);
> + goto disable_hsio_clk;
> + }
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + err = irq;
> + goto disable_clks;
> + }
> + dwc3_imx->irq = irq;
> +
> + err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt,
> + IRQF_ONESHOT, dev_name(dev), dwc3_imx);
> + if (err) {
> + dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err);
> + goto disable_clks;
> + }
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> + err = pm_runtime_get_sync(dev);
> + if (err < 0)
> + goto disable_rpm;
> +
> + dwc3_np = of_get_child_by_name(node, "dwc3");
> + if (!dwc3_np) {
> + dev_err(dev, "failed to find dwc3 core child\n");
> + goto disable_rpm;
> + }
> +
> + err = of_platform_populate(node, NULL, NULL, dev);
> + if (err) {
> + dev_err(&pdev->dev, "failed to create dwc3 core\n");
> + goto err_node_put;
> + }
> +
> + dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np);
> + if (!dwc3_imx->dwc3) {
> + dev_err(dev, "failed to get dwc3 platform device\n");
> + err = -ENODEV;
> + goto depopulate;
> + }
> + of_node_put(dwc3_np);
> +
> + device_set_wakeup_capable(dev, true);
> + pm_runtime_put(dev);
> +
> + return 0;
> +
> +depopulate:
> + of_platform_depopulate(dev);
> +err_node_put:
> + of_node_put(dwc3_np);
> +disable_rpm:
> + pm_runtime_disable(dev);
> + pm_runtime_put_noidle(dev);
> +disable_clks:
> + clk_disable_unprepare(dwc3_imx->suspend_clk);
> +disable_hsio_clk:
> + clk_disable_unprepare(dwc3_imx->hsio_clk);
> +
> + return err;
> +}
> +
> +static int dwc3_imx8mp_remove(struct platform_device *pdev) {
> + struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev);
> + struct device *dev = &pdev->dev;
> +
> + pm_runtime_get_sync(dev);
> + of_platform_depopulate(dev);
> +
> + clk_disable_unprepare(dwc3_imx->suspend_clk);
> + clk_disable_unprepare(dwc3_imx->hsio_clk);
> +
> + pm_runtime_disable(dev);
> + pm_runtime_put_noidle(dev);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused dwc3_imx8mp_suspend(struct dwc3_imx8mp
> *dwc3_imx,
> + pm_message_t msg)
> +{
> + if (dwc3_imx->pm_suspended)
> + return 0;
> +
> + /* Wakeup enable */
> + if (PMSG_IS_AUTO(msg) || device_may_wakeup(dwc3_imx->dev))
> + dwc3_imx8mp_wakeup_enable(dwc3_imx);
> +
> + dwc3_imx->pm_suspended = true;
> +
> + return 0;
> +}
> +
> +static int __maybe_unused dwc3_imx8mp_resume(struct dwc3_imx8mp
> *dwc3_imx,
> + pm_message_t msg)
> +{
> + struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3);
> + int ret = 0;
> +
> + if (!dwc3_imx->pm_suspended)
> + return 0;
> +
> + /* Wakeup disable */
> + dwc3_imx8mp_wakeup_disable(dwc3_imx);
> + dwc3_imx->pm_suspended = false;
> +
> + if (dwc3_imx->wakeup_pending) {
> + dwc3_imx->wakeup_pending = false;
> + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) {
> + pm_runtime_mark_last_busy(dwc->dev);
> + pm_runtime_put_autosuspend(dwc->dev);
> + } else {
> + /*
> + * Add wait for xhci switch from suspend
> + * clock to normal clock to detect connection.
> + */
> + usleep_range(9000, 10000);
> + }
> + enable_irq(dwc3_imx->irq);
> + }
> +
> + return ret;
> +}
> +
> +static int __maybe_unused dwc3_imx8mp_pm_suspend(struct device *dev) {
> + struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = dwc3_imx8mp_suspend(dwc3_imx, PMSG_SUSPEND);
> +
> + if (device_may_wakeup(dwc3_imx->dev))
> + enable_irq_wake(dwc3_imx->irq);
> + else
> + clk_disable_unprepare(dwc3_imx->suspend_clk);
> +
> + clk_disable_unprepare(dwc3_imx->hsio_clk);
> + dev_dbg(dev, "dwc3 imx8mp pm suspend.\n");
> +
> + return ret;
> +}
> +
> +static int __maybe_unused dwc3_imx8mp_pm_resume(struct device *dev) {
> + struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
> + int ret;
> +
> + if (device_may_wakeup(dwc3_imx->dev)) {
> + disable_irq_wake(dwc3_imx->irq);
> + } else {
> + ret = clk_prepare_enable(dwc3_imx->suspend_clk);
> + if (ret)
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(dwc3_imx->hsio_clk);
> + if (ret)
> + return ret;
> +
> + ret = dwc3_imx8mp_resume(dwc3_imx, PMSG_RESUME);
> +
> + pm_runtime_disable(dev);
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> +
> + dev_dbg(dev, "dwc3 imx8mp pm resume.\n");
> +
> + return ret;
> +}
> +
> +static int __maybe_unused dwc3_imx8mp_runtime_suspend(struct device
> +*dev) {
> + struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
> +
> + dev_dbg(dev, "dwc3 imx8mp runtime suspend.\n");
> +
> + return dwc3_imx8mp_suspend(dwc3_imx, PMSG_AUTO_SUSPEND); }
> +
> +static int __maybe_unused dwc3_imx8mp_runtime_resume(struct device
> +*dev) {
> + struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
> +
> + dev_dbg(dev, "dwc3 imx8mp runtime resume.\n");
> +
> + return dwc3_imx8mp_resume(dwc3_imx, PMSG_AUTO_RESUME); }
> +
> +static const struct dev_pm_ops dwc3_imx8mp_dev_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(dwc3_imx8mp_pm_suspend,
> dwc3_imx8mp_pm_resume)
> + SET_RUNTIME_PM_OPS(dwc3_imx8mp_runtime_suspend,
> + dwc3_imx8mp_runtime_resume, NULL) };
> +
> +static const struct of_device_id dwc3_imx8mp_of_match[] = {
> + { .compatible = "fsl,imx8mp-dwc3", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, dwc3_imx8mp_of_match);
> +
> +static struct platform_driver dwc3_imx8mp_driver = {
> + .probe = dwc3_imx8mp_probe,
> + .remove = dwc3_imx8mp_remove,
> + .driver = {
> + .name = "imx8mp-dwc3",
> + .pm = &dwc3_imx8mp_dev_pm_ops,
> + .of_match_table = dwc3_imx8mp_of_match,
> + },
> +};
> +
> +module_platform_driver(dwc3_imx8mp_driver);
> +
> +MODULE_ALIAS("platform:imx8mp-dwc3");
> +MODULE_AUTHOR("jun.li at nxp.com");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("DesignWare USB3 imx8mp Glue Layer");
> --
> 2.7.4
A gentle ping.
Thanks
Li Jun
More information about the linux-arm-kernel
mailing list