[PATCH 2/3] arm64: dts: ti: Add Support for AM642 SoC
Suman Anna
s-anna at ti.com
Thu Dec 3 16:56:17 EST 2020
Hi Dave,
On 11/24/20 11:20 PM, Dave Gerlach wrote:
> The AM642 SoC belongs to the K3 Multicore SoC architecture platform,
> providing advanced system integration to enable applications such as
> Motor Drives, PLC, Remote IO and IoT Gateways.
>
> Some highlights of this SoC are:
> * Dual Cortex-A53s in a single cluster, two clusters of dual Cortex-R5F
> MCUs, and a single Cortex-M4F.
> * Two Gigabit Industrial Communication Subsystems (ICSSG).
> * Integrated Ethernet switch supporting up to a total of two external
> ports.
> * PCIe-GEN2x1L, USB3/USB2, 2xCAN-FD, eMMC and SD, UFS, OSPI memory
> controller, QSPI, I2C, eCAP/eQEP, ePWM, ADC, among other
> peripherals.
> * Centralized System Controller for Security, Power, and Resource
> Management (DMSC).
>
> See AM64X Technical Reference Manual (SPRUIM2, Nov 2020)
> for further details: https://www.ti.com/lit/pdf/spruim2
>
> Introduce basic support for the AM642 SoC to enable minimal
> ramdisk boot. Introduce a limited set of MAIN domain periperhals
> under cbass_main and a placeholder cbass_mcu node for future MCU
> domain usage.
>
> Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 178 +++++++++++++++++++++++
> arch/arm64/boot/dts/ti/k3-am64.dtsi | 95 ++++++++++++
> arch/arm64/boot/dts/ti/k3-am642.dtsi | 65 +++++++++
> 3 files changed, 338 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi
> create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> new file mode 100644
> index 000000000000..4830a8e4d89b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -0,0 +1,178 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for AM642 SoC Family Main Domain peripherals
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +&cbass_main {
> + gic500: interrupt-controller at 1800000 {
> + compatible = "arm,gic-v3";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
> + <0x00 0x01840000 0x00 0xC0000>; /* GICR */
> + /*
> + * vcpumntirq:
> + * virtual CPU interface maintenance interrupt
> + */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> + gic_its: msi-controller at 1820000 {
> + compatible = "arm,gic-v3-its";
> + reg = <0x00 0x01820000 0x00 0x10000>;
> + socionext,synquacer-pre-its = <0x1000000 0x400000>;
> + msi-controller;
> + #msi-cells = <1>;
> + };
> + };
> +
> + dmss {
> + compatible = "simple-mfd";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + dma-ranges;
> + ranges;
> +
> + secure_proxy_main: mailbox at 4d000000 {
> + compatible = "ti,am654-secure-proxy";
> + #mbox-cells = <1>;
> + reg-names = "target_data", "rt", "scfg";
> + reg = <0x00 0x4d000000 0x00 0x80000>,
> + <0x00 0x4a600000 0x00 0x80000>,
> + <0x00 0x4a400000 0x00 0x80000>;
> + interrupt-names = "rx_012";
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + dmsc: dmsc {
> + compatible = "ti,k2g-sci";
> + ti,host-id = <12>;
> + mbox-names = "rx", "tx";
> + mboxes= <&secure_proxy_main 12>,
> + <&secure_proxy_main 13>;
> +
> + k3_pds: power-controller {
> + compatible = "ti,sci-pm-domain";
> + #power-domain-cells = <2>;
> + };
> +
> + k3_clks: clocks {
> + compatible = "ti,k2g-sci-clk";
> + #clock-cells = <2>;
> + };
> +
> + k3_reset: reset-controller {
> + compatible = "ti,sci-reset";
> + #reset-cells = <2>;
> + };
> + };
> +
> + main_pmx0: pinctrl at f4000 {
> + compatible = "pinctrl-single";
> + reg = <0x00 0xf4000 0x00 0x2e4>;
> + #pinctrl-cells = <1>;
> + pinctrl-single,register-width = <32>;
> + pinctrl-single,function-mask = <0xffffffff>;
> + };
> +
> + chipid at 43000014 {
> + compatible = "ti,am654-chipid";
> + reg = <0x00 0x43000014 0x00 0x4>;
> + };
> +
> + main_uart0: serial at 2800000 {
> + compatible = "ti,am64-uart", "ti,am654-uart";
> + reg = <0x00 0x02800000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 146 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart1: serial at 2810000 {
> + compatible = "ti,am64-uart", "ti,am654-uart";
> + reg = <0x00 0x02810000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 152 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart2: serial at 2820000 {
> + compatible = "ti,am64-uart", "ti,am654-uart";
> + reg = <0x00 0x02820000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 153 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart3: serial at 2830000 {
> + compatible = "ti,am64-uart", "ti,am654-uart";
> + reg = <0x00 0x02830000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 154 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart4: serial at 2840000 {
> + compatible = "ti,am64-uart", "ti,am654-uart";
> + reg = <0x00 0x02840000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 155 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart5: serial at 2850000 {
> + compatible = "ti,am64-uart", "ti,am654-uart";
> + reg = <0x00 0x02850000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 156 0>;
> + clock-names = "fclk";
> + };
> +
> + main_uart6: serial at 2860000 {
> + compatible = "ti,am64-uart", "ti,am654-uart";
> + reg = <0x00 0x02860000 0x00 0x100>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> + clock-frequency = <48000000>;
> + current-speed = <115200>;
> + power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 158 0>;
> + clock-names = "fclk";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> new file mode 100644
> index 000000000000..0637cf9ede5f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> @@ -0,0 +1,95 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for AM642 SoC Family
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/k3.h>
> +#include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> +/ {
> + model = "Texas Instruments K3 AM642 SoC";
> + compatible = "ti,am642";
> + interrupt-parent = <&gic500>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial2 = &main_uart0;
> + serial3 = &main_uart1;
> + serial4 = &main_uart2;
> + serial5 = &main_uart3;
> + serial6 = &main_uart4;
> + serial7 = &main_uart5;
> + serial8 = &main_uart6;
> + };
> +
> + chosen { };
> +
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> +
> + psci: psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> + };
> +
> + a53_timer0: timer-cl0-cpu0 {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
> + };
> +
> + pmu: pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + cbass_main: bus at f4000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
> + <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
> + <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */
> + <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
> + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */
> + <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */
> + <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
> + <0x00 0x30000000 0x00 0x30000000 0x00 0x000bc100>, /* ICSSG0/1 */
> + <0x00 0x37000000 0x00 0x37000000 0x00 0x00040000>, /* TIMERMGR0 TIMERS */
> + <0x00 0x39000000 0x00 0x39000000 0x00 0x00000400>, /* CPTS0 */
> + <0x00 0x3b000000 0x00 0x3b000000 0x00 0x00000400>, /* GPMC0_CFG */
> + <0x00 0x3cd00000 0x00 0x3cd00000 0x00 0x00000200>, /* TIMERMGR0_CONFIG */
> + <0x00 0x3f004000 0x00 0x3f004000 0x00 0x00000400>, /* GICSS0_REGS */
> + <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* CTRL_MMR0 */
> + <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMASS */
> + <0x00 0x50000000 0x00 0x50000000 0x00 0x08000000>, /* GPMC0 DATA */
> + <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002e4>, /* PINCTRL */
Can you move this to the top, so that all these are in increasing memory order?
> + <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
> + <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
> + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
This is atleast missing the ranges for On-Chip SRAM and the R5FSS, but those can
always be added incrementally as well.
Also, is there a reason for using these ranges a bit more granular compared to
the earlier SoCs?
regards
Suman
> +
> + /* MCU Domain Range */
> + <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>;
> +
> + cbass_mcu: bus at 4000000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
> + };
> + };
> +};
> +
> +/* Now include the peripherals for each bus segments */
> +#include "k3-am64-main.dtsi"
> diff --git a/arch/arm64/boot/dts/ti/k3-am642.dtsi b/arch/arm64/boot/dts/ti/k3-am642.dtsi
> new file mode 100644
> index 000000000000..b30f239e84f1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am642.dtsi
> @@ -0,0 +1,65 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for AM642 SoC family in Dual core configuration
> + *
> + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +
> +#include "k3-am64.dtsi"
> +
> +/ {
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0: cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> +
> + core1 {
> + cpu = <&cpu1>;
> + };
> + };
> + };
> +
> + cpu0: cpu at 0 {
> + compatible = "arm,cortex-a53";
> + reg = <0x000>;
> + device_type = "cpu";
> + enable-method = "psci";
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpu1: cpu at 1 {
> + compatible = "arm,cortex-a53";
> + reg = <0x001>;
> + device_type = "cpu";
> + enable-method = "psci";
> + i-cache-size = <0x8000>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <0x8000>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&L2_0>;
> + };
> + };
> +
> + L2_0: l2-cache0 {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-size = <0x40000>;
> + cache-line-size = <64>;
> + cache-sets = <512>;
> + };
> +};
>
More information about the linux-arm-kernel
mailing list