[PATCH v3 3/6] ARM: dts: sun8i: v3s: Add node for system control

[Martin Cerveny]

Hello.

On Thu, 3 Dec 2020, Chen-Yu Tsai wrote:

> Hi,
>
> On Mon, Nov 16, 2020 at 8:57 PM Martin Cerveny <m.cerveny at computer.org> wrote:
>>
>> Allwinner V3s has system control and SRAM C1 region similar to H3.
>>
>> Signed-off-by: Martin Cerveny <m.cerveny at computer.org>
>> ---
>>  arch/arm/boot/dts/sun8i-v3s.dtsi | 14 ++++++++++++++
>>  1 file changed, 14 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
>> index 0c7341676921..70193512c222 100644
>> --- a/arch/arm/boot/dts/sun8i-v3s.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
>> @@ -161,6 +161,20 @@ syscon: system-control at 1c00000 {
>>                         #address-cells = <1>;
>>                         #size-cells = <1>;
>>                         ranges;
>> +
>> +                       sram_c: sram at 1d00000 {
>> +                               compatible = "mmio-sram";
>> +                               reg = <0x01d00000 0x80000>;
>
> How was this address derived? Did you check that there is actually SRAM here?

Yes, I did some checking (mmap). But I repeated measurement and found 
mirrored regions:

- SRAM_C is mirrored from 0x0000_4000 (primary location) to 0x01d0_4000 (size 0xb000)
   (probably exact size is 0xb0c0)
- rest of 0x01d0_0000 are discontinuously filled with R/W register sets
   (probably some internals registers from VE) that I thought to be SRAM too
- register SRAM_CTRL_REG0==0x01c00_0000 (value 0x7fff_ffff) switch whole
   region 0x01d0_0000-0x01df_ffff __AND__ 0x0000_4000-0x0000_ffff
- VE/cedrus code use this regions indirectly
   (VE_AVC_SRAM_PORT_OFFSET/VE_AVC_SRAM_PORT_DATA...)
   and it is not influenced by "true" SRAM mapping or size

-> so I suppose to better use only SRAM_C lower definition:

---
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index e8f304125e2d..90d703e5b73b 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -162,17 +162,17 @@ syscon: system-control at 1c00000 {
  			#size-cells = <1>;
  			ranges;

-			sram_c: sram at 1d00000 {
+			sram_c: sram at 4000 {
  				compatible = "mmio-sram";
-				reg = <0x01d00000 0x80000>;
+				reg = <0x4000 0xb000>;
  				#address-cells = <1>;
  				#size-cells = <1>;
-				ranges = <0 0x01d00000 0x80000>;
+				ranges = <0 0 0x4000 0xb000>;

  				ve_sram: sram-section at 0 {
  					compatible = "allwinner,sun8i-v3s-sram-c1",
  						     "allwinner,sun4i-a10-sram-c1";
-					reg = <0x000000 0x80000>;
+					reg = <0x0 0xb000>;
  				};
  			};
  		};
---

Does someone have accessible specific documentation of VE/cedrus for V3s ?

Regards, Martin

> ChenYu
>
>> +                               #address-cells = <1>;
>> +                               #size-cells = <1>;
>> +                               ranges = <0 0x01d00000 0x80000>;
>> +
>> +                               ve_sram: sram-section at 0 {
>> +                                       compatible = "allwinner,sun8i-v3s-sram-c1",
>> +                                                    "allwinner,sun4i-a10-sram-c1";
>> +                                       reg = <0x000000 0x80000>;
>> +                               };
>> +                       };
>>                 };
>>
>>                 tcon0: lcd-controller at 1c0c000 {
>> --
>> 2.25.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>