[RFC V2 3/3] s390/mm: Define arch_get_mappable_range()

[David Hildenbrand]

On 03.12.20 12:51, Heiko Carstens wrote:
> On Thu, Dec 03, 2020 at 06:03:00AM +0530, Anshuman Khandual wrote:
>>>> diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
>>>> index 5060956b8e7d..cc055a78f7b6 100644
>>>> --- a/arch/s390/mm/extmem.c
>>>> +++ b/arch/s390/mm/extmem.c
>>>> @@ -337,6 +337,11 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
>>>>  		goto out_free_resource;
>>>>  	}
>>>>  
>>>> +	if (seg->end + 1 > VMEM_MAX_PHYS || seg->end + 1 < seg->start_addr) {
>>>> +		rc = -ERANGE;
>>>> +		goto out_resource;
>>>> +	}
>>>> +
>>>>  	rc = vmem_add_mapping(seg->start_addr, seg->end - seg->start_addr + 1);
>>>>  	if (rc)
>>>>  		goto out_resource;
>>>> diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
>>>> index b239f2ba93b0..06dddcc0ce06 100644
>>>> --- a/arch/s390/mm/vmem.c
>>>> +++ b/arch/s390/mm/vmem.c
>>>> @@ -532,14 +532,19 @@ void vmem_remove_mapping(unsigned long start, unsigned long size)
>>>>  	mutex_unlock(&vmem_mutex);
>>>>  }
>>>>  
>>>> +struct range arch_get_mappable_range(void)
>>>> +{
>>>> +	struct range memhp_range;
>>>> +
>>>> +	memhp_range.start = 0;
>>>> +	memhp_range.end =  VMEM_MAX_PHYS;
>>>> +	return memhp_range;
>>>> +}
>>>> +
>>>>  int vmem_add_mapping(unsigned long start, unsigned long size)
>>>>  {
>>>>  	int ret;
>>>>  
>>>> -	if (start + size > VMEM_MAX_PHYS ||
>>>> -	    start + size < start)
>>>> -		return -ERANGE;
>>>> -
>>>
>>> I really fail to see how this could be considered an improvement for
>>> s390. Especially I do not like that the (central) range check is now
>>> moved to the caller (__segment_load). Which would mean potential
>>> additional future callers would have to duplicate that code as well.
>>
>> The physical range check is being moved to the generic hotplug code
>> via arch_get_mappable_range() instead, making the existing check in
>> vmem_add_mapping() redundant. Dropping the check there necessitates
>> adding back a similar check in __segment_load(). Otherwise there
>> will be a loss of functionality in terms of range check.
>>
>> May be we could just keep this existing check in vmem_add_mapping()
>> as well in order avoid this movement but then it would be redundant
>> check in every hotplug path.
>>
>> So I guess the choice is to either have redundant range checks in
>> all hotplug paths or future internal callers of vmem_add_mapping()
>> take care of the range check.
> 
> The problem I have with this current approach from an architecture
> perspective: we end up having two completely different methods which
> are doing the same and must be kept in sync. This might be obvious
> looking at this patch, but I'm sure this will go out-of-sync (aka
> broken) sooner or later.

Exactly, there should be one function only that was the whole idea of
arch_get_mappable_range().

> 
> Therefore I would really like to see a single method to do the range
> checking. Maybe you could add a callback into architecture code, so
> that such an architecture specific function could also be used
> elsewhere. Dunno.
> 

I think we can just switch to using "memhp_range_allowed()" here then
after implementing arch_get_mappable_range().

Doesn't hurt to double check in vmem_add_mapping() - especially to keep
extmem working without changes. At least for callers of memory hotplug
it's then clear which values actually won't fail deep down in arch code.

-- 
Thanks,

David / dhildenb