[PATCH 1/2] ARM: dts: armada388-helios4: assign pinctrl to LEDs

[Rosen Penev]

Split up the pins to match earlier definitions. Allows LEDs to flash
properly.

Fixes: ced8025b569e ("ARM: dts: armada388-helios4")

Signed-off-by: Rosen Penev <rosenp at gmail.com>
---
 arch/arm/boot/dts/armada-388-helios4.dts | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
index b3728de3bd3f..5a6af7e83e44 100644
--- a/arch/arm/boot/dts/armada-388-helios4.dts
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -70,6 +70,9 @@
 
 	system-leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_system_led_pins>;
+
 		status-led {
 			label = "helios4:green:status";
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
@@ -86,6 +89,9 @@
 
 	io-leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_io_led_pins>;
+
 		sata1-led {
 			label = "helios4:green:ata1";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
@@ -286,9 +292,12 @@
 						       "mpp39", "mpp40";
 					marvell,function = "sd0";
 				};
-				helios_led_pins: helios-led-pins {
-					marvell,pins = "mpp24", "mpp25",
-						       "mpp49", "mpp50",
+				helios_system_led_pins: helios-system-led-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "gpio";
+				};
+				helios_io_led_pins: helios-io-led-pins {
+					marvell,pins = "mpp49", "mpp50",
 						       "mpp52", "mpp53",
 						       "mpp54";
 					marvell,function = "gpio";
-- 
2.17.1