[PATCH v4 15/26] kvm: arm64: Add SMC handler in nVHE EL2

David Brazdil dbrazdil at google.com
Wed Dec 2 13:41:11 EST 2020


Add handler of host SMCs in KVM nVHE trap handler. Forward all SMCs to
EL3 and propagate the result back to EL1. This is done in preparation
for validating host SMCs in KVM protected mode.

The implementation assumes that firmware uses SMCCC v1.2 or older. That
means x0-x17 can be used both for arguments and results, other GPRs are
preserved.

Signed-off-by: David Brazdil <dbrazdil at google.com>
---
 arch/arm64/kvm/hyp/nvhe/host.S     | 38 ++++++++++++++++++++++++++++++
 arch/arm64/kvm/hyp/nvhe/hyp-main.c | 35 ++++++++++++++++++++++++---
 2 files changed, 70 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S
index fe2740b224cf..2b56f0bdf874 100644
--- a/arch/arm64/kvm/hyp/nvhe/host.S
+++ b/arch/arm64/kvm/hyp/nvhe/host.S
@@ -180,3 +180,41 @@ SYM_CODE_START(__kvm_hyp_host_vector)
 	invalid_host_el1_vect			// FIQ 32-bit EL1
 	invalid_host_el1_vect			// Error 32-bit EL1
 SYM_CODE_END(__kvm_hyp_host_vector)
+
+/*
+ * Forward SMC with arguments in struct kvm_cpu_context, and
+ * store the result into the same struct. Assumes SMCCC 1.2 or older.
+ *
+ * x0: struct kvm_cpu_context*
+ */
+SYM_CODE_START(__kvm_hyp_host_forward_smc)
+	/*
+	 * Use x18 to keep the pointer to the host context because
+	 * x18 is callee-saved in SMCCC but not in AAPCS64.
+	 */
+	mov	x18, x0
+
+	ldp	x0, x1,   [x18, #CPU_XREG_OFFSET(0)]
+	ldp	x2, x3,   [x18, #CPU_XREG_OFFSET(2)]
+	ldp	x4, x5,   [x18, #CPU_XREG_OFFSET(4)]
+	ldp	x6, x7,   [x18, #CPU_XREG_OFFSET(6)]
+	ldp	x8, x9,   [x18, #CPU_XREG_OFFSET(8)]
+	ldp	x10, x11, [x18, #CPU_XREG_OFFSET(10)]
+	ldp	x12, x13, [x18, #CPU_XREG_OFFSET(12)]
+	ldp	x14, x15, [x18, #CPU_XREG_OFFSET(14)]
+	ldp	x16, x17, [x18, #CPU_XREG_OFFSET(16)]
+
+	smc	#0
+
+	stp	x0, x1,   [x18, #CPU_XREG_OFFSET(0)]
+	stp	x2, x3,   [x18, #CPU_XREG_OFFSET(2)]
+	stp	x4, x5,   [x18, #CPU_XREG_OFFSET(4)]
+	stp	x6, x7,   [x18, #CPU_XREG_OFFSET(6)]
+	stp	x8, x9,   [x18, #CPU_XREG_OFFSET(8)]
+	stp	x10, x11, [x18, #CPU_XREG_OFFSET(10)]
+	stp	x12, x13, [x18, #CPU_XREG_OFFSET(12)]
+	stp	x14, x15, [x18, #CPU_XREG_OFFSET(14)]
+	stp	x16, x17, [x18, #CPU_XREG_OFFSET(16)]
+
+	ret
+SYM_CODE_END(__kvm_hyp_host_forward_smc)
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
index a4f1cac714d7..f25680ede080 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
@@ -18,6 +18,8 @@
 
 DEFINE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);
 
+void __kvm_hyp_host_forward_smc(struct kvm_cpu_context *host_ctxt);
+
 static void handle___kvm_vcpu_run(struct kvm_cpu_context *host_ctxt)
 {
 	DECLARE_REG(struct kvm_vcpu *, vcpu, host_ctxt, 1);
@@ -152,12 +154,39 @@ static void handle_host_hcall(struct kvm_cpu_context *host_ctxt)
 	cpu_reg(host_ctxt, 0) = SMCCC_RET_NOT_SUPPORTED;
 }
 
+static void default_host_smc_handler(struct kvm_cpu_context *host_ctxt)
+{
+	__kvm_hyp_host_forward_smc(host_ctxt);
+}
+
+static void skip_host_instruction(void)
+{
+	write_sysreg_el2(read_sysreg_el2(SYS_ELR) + 4, SYS_ELR);
+}
+
+static void handle_host_smc(struct kvm_cpu_context *host_ctxt)
+{
+	default_host_smc_handler(host_ctxt);
+
+	/*
+	 * Unlike HVC, the return address of an SMC is the instruction's PC.
+	 * Move the return address past the instruction.
+	 */
+	skip_host_instruction();
+}
+
 void handle_trap(struct kvm_cpu_context *host_ctxt)
 {
 	u64 esr = read_sysreg_el2(SYS_ESR);
 
-	if (unlikely(ESR_ELx_EC(esr) != ESR_ELx_EC_HVC64))
+	switch (ESR_ELx_EC(esr)) {
+	case ESR_ELx_EC_HVC64:
+		handle_host_hcall(host_ctxt);
+		break;
+	case ESR_ELx_EC_SMC64:
+		handle_host_smc(host_ctxt);
+		break;
+	default:
 		hyp_panic();
-
-	handle_host_hcall(host_ctxt);
+	}
 }
-- 
2.29.2.454.gaff20da3a2-goog




More information about the linux-arm-kernel mailing list