[PATCH v4 3/4] scmi-cpufreq: get opp_shared_cpus from opp-v2 for EM

[Nicola Mazzucato]

By design, SCMI performance domains define the granularity of
performance controls, they do not describe any underlying hardware
dependencies (although they may match in many cases).

It is therefore possible to have some platforms where hardware may have
the ability to control CPU performance at different granularity and choose
to describe fine-grained performance control through SCMI.

In such situations, the energy model would be provided with inaccurate
information based on controls, while it still needs to know the
performance boundaries.

To restore correct functionality, retrieve information of CPUs under the
same v/f domain from operating-points-v2 in DT, and pass it on to EM.

Signed-off-by: Nicola Mazzucato <nicola.mazzucato at arm.com>
---
 drivers/cpufreq/scmi-cpufreq.c | 51 +++++++++++++++++++++++-----------
 1 file changed, 35 insertions(+), 16 deletions(-)

diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 491a0a24fb1e..f505efcc62b1 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -127,6 +127,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	struct cpufreq_frequency_table *freq_table;
 	struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power);
 	bool power_scale_mw;
+	cpumask_var_t opp_shared_cpus;
 
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
@@ -134,30 +135,45 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 		return -ENODEV;
 	}
 
-	ret = handle->perf_ops->device_opps_add(handle, cpu_dev);
-	if (ret) {
-		dev_warn(cpu_dev, "failed to add opps to the device\n");
-		return ret;
-	}
+	if (!zalloc_cpumask_var(&opp_shared_cpus, GFP_KERNEL))
+		return -ENOMEM;
 
 	ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
 		dev_warn(cpu_dev, "failed to get sharing cpumask\n");
-		return ret;
+		goto out_free_cpumask;
 	}
 
-	ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
-	if (ret) {
-		dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
-			__func__, ret);
-		return ret;
+	/*
+	 * The OPP 'sharing cpus' info may come from dt through an empty opp
+	 * table and opp-shared. If found, it takes precedence over the SCMI
+	 * domain IDs info.
+	 */
+	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, opp_shared_cpus);
+	if (ret || !cpumask_weight(opp_shared_cpus)) {
+		/*
+		 * Either opp-table is not set or no opp-shared was found,
+		 * use the information from SCMI domain IDs.
+		 */
+		cpumask_copy(opp_shared_cpus, policy->cpus);
 	}
 
 	nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
 	if (nr_opp <= 0) {
-		dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
-		ret = -EPROBE_DEFER;
-		goto out_free_opp;
+		ret = handle->perf_ops->device_opps_add(handle, cpu_dev);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opps to the device\n");
+			goto out_free_cpumask;
+		}
+
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev, opp_shared_cpus);
+		if (ret) {
+			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+				__func__, ret);
+			goto out_free_cpumask;
+		}
+
+		nr_opp = dev_pm_opp_get_opp_count(cpu_dev);
 	}
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
@@ -191,15 +207,18 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 		handle->perf_ops->fast_switch_possible(handle, cpu_dev);
 
 	power_scale_mw = handle->perf_ops->power_scale_mw_get(handle);
-	em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus,
+	em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, opp_shared_cpus,
 				    power_scale_mw);
 
-	return 0;
+	ret = 0;
+	goto out_free_cpumask;
 
 out_free_priv:
 	kfree(priv);
 out_free_opp:
 	dev_pm_opp_remove_all_dynamic(cpu_dev);
+out_free_cpumask:
+	free_cpumask_var(opp_shared_cpus);
 
 	return ret;
 }
-- 
2.27.0