[PATCH v2 06/19] dt-bindings: media: sun6i-a31-csi: Add MIPI CSI-2 input port
Paul Kocialkowski
paul.kocialkowski at bootlin.com
Wed Dec 2 09:16:44 EST 2020
Hi,
On Tue 01 Dec 20, 11:43, Maxime Ripard wrote:
> On Sat, Nov 28, 2020 at 03:28:26PM +0100, Paul Kocialkowski wrote:
> > The A31 CSI controller supports two distinct input interfaces:
> > parallel and an external MIPI CSI-2 bridge. The parallel interface
> > is often connected to a set of hardware pins while the MIPI CSI-2
> > bridge is an internal FIFO-ish link. As a result, these two inputs
> > are distinguished as two different ports.
> >
> > Note that only one of the two may be present on a controller instance.
> > For example, the V3s has one controller dedicated to MIPI-CSI2 and one
> > dedicated to parallel.
> >
> > Update the binding with an explicit ports node that holds two distinct
> > port nodes: one for parallel input and one for MIPI CSI-2.
> >
> > This is backward-compatible with the single-port approach that was
> > previously taken for representing the parallel interface port, which
> > stays enumerated as fwnode port 0. However, it is now marked as
> > deprecated and the multi-port approach should be preferred.
> >
> > Note that additional ports may be added in the future, especially to
> > support feeding the CSI controller's output to the ISP.
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
> > ---
> > .../media/allwinner,sun6i-a31-csi.yaml | 86 ++++++++++++++++---
> > 1 file changed, 73 insertions(+), 13 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> > index 1fd9b5532a21..3bcee2d44f3c 100644
> > --- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
> > @@ -43,6 +43,7 @@ properties:
> > # See ./video-interfaces.txt for details
> > port:
> > type: object
> > + deprecated: true
>
> I'm not sure we want to deprecate it. There's some SoCs with the same
> controller but without the MIPI-CSI block where this would be completely
> valid
I think we'll need to deprecate it when adding support for the ISP anyway,
so I figured we might as well do it now. But I'm okay to postpone this for now.
> > properties:
> > endpoint:
> > @@ -67,6 +68,59 @@ properties:
> >
> > additionalProperties: false
> >
> > + ports:
> > + type: object
> > +
> > + properties:
> > + port at 0:
> > + type: object
> > + description: Parallel input port, connect to a parallel sensor
> > +
> > + properties:
> > + reg:
> > + const: 0
> > +
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + remote-endpoint: true
> > +
> > + bus-width:
> > + enum: [ 8, 10, 12, 16 ]
> > +
> > + pclk-sample: true
> > + hsync-active: true
> > + vsync-active: true
> > +
> > + required:
> > + - bus-width
> > + - remote-endpoint
> > +
> > + required:
> > + - endpoint
> > +
> > + additionalProperties: false
> > +
> > + port at 1:
> > + type: object
> > + description: MIPI CSI-2 bridge input port
> > +
> > + properties:
> > + reg:
> > + const: 1
> > +
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + remote-endpoint: true
> > +
> > + required:
> > + - remote-endpoint
> > +
> > + additionalProperties: false
>
> There's a schema for the OF-graph now, you'll want to use it.
I didn't know that, thanks for the tip! Will look into it.
Cheers,
Paul
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20201202/940bd223/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list