[PATCH 02/12] arm64: dts: zynqmp: Add DT description for si5328 for zcu102/zcu106

Michal Simek michal.simek at xilinx.com
Wed Dec 2 09:06:01 EST 2020


Origin DT binding just specify driver but wasn't aligned with DT binding
which came later. Extend description for zcu102 and zcu106 to cover latest
binding.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    | 17 ++++++++++++++
 .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    | 22 +++++++++++++++++++
 2 files changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index f1255f635dfd..5ff7ab665374 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -132,6 +132,12 @@ ina226-u75 {
 		compatible = "iio-hwmon";
 		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
 	};
+
+	refhdmi: refhdmi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <114285000>;
+	};
 };
 
 &can1 {
@@ -526,6 +532,17 @@ si5328: clock-generator at 69 {/* SI5328 - u20 */
 				 * interrupt-parent = <&>;
 				 * interrupts = <>;
 				 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#clock-cells = <1>;
+				clocks = <&refhdmi>;
+				clock-names = "xtal";
+				clock-output-names = "si5328";
+
+				si5328_clk: clk0 at 0 {
+					reg = <0>;
+					clock-frequency = <27000000>;
+				};
 			};
 		};
 		/* 5 - 7 unconnected */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 6e9efe233838..7910ac125101 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -132,6 +132,12 @@ ina226-u75 {
 		compatible = "iio-hwmon";
 		io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
 	};
+
+	refhdmi: refhdmi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <114285000>;
+	};
 };
 
 &can1 {
@@ -520,6 +526,22 @@ i2c at 4 {
 			reg = <4>;
 			si5328: clock-generator at 69 {/* SI5328 - u20 */
 				reg = <0x69>;
+				/*
+				 * Chip has interrupt present connected to PL
+				 * interrupt-parent = <&>;
+				 * interrupts = <>;
+				 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#clock-cells = <1>;
+				clocks = <&refhdmi>;
+				clock-names = "xtal";
+				clock-output-names = "si5328";
+
+				si5328_clk: clk0 at 0 {
+					reg = <0>;
+					clock-frequency = <27000000>;
+				};
 			};
 		};
 		i2c at 5 {
-- 
2.29.2




More information about the linux-arm-kernel mailing list