[PATCH v2] staging: media: imx: Kconfig: support VIDEO_IMX7_CSI for imx8m

Martin Kepplinger martin.kepplinger at puri.sm
Wed Dec 2 08:12:51 EST 2020


As described in NXPs' linux tree, the imx8m SoC includes the same
CSI bridge hardware that is part of imx7d. We should be able to
use the "fsl,imx7-csi" driver for imx8m directly.

Since ipuv3 is not relevant for imx8m, move that dependency to
VIDEO_IMX_CSI. That makes VIDEO_IMX7_CSI available to support imx8m
too.

Signed-off-by: Martin Kepplinger <martin.kepplinger at puri.sm>
---

revision history:

v2: (thanks Philipp and Hans for feedback)
  * make only VIDEO_IMX_CSI build imx6-media and thus make VIDEO_IMX_MEDIA
    only build common which can be use by all modules.

v1:
  https://lore.kernel.org/linux-media/20201109091340.7223-1-martin.kepplinger@puri.sm/

 drivers/staging/media/imx/Kconfig  | 9 +++++----
 drivers/staging/media/imx/Makefile | 2 +-
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig
index f555aac8a9d5..15322dc3124a 100644
--- a/drivers/staging/media/imx/Kconfig
+++ b/drivers/staging/media/imx/Kconfig
@@ -2,7 +2,7 @@
 config VIDEO_IMX_MEDIA
 	tristate "i.MX5/6 V4L2 media core driver"
 	depends on ARCH_MXC || COMPILE_TEST
-	depends on VIDEO_V4L2 && IMX_IPUV3_CORE
+	depends on VIDEO_V4L2
 	select MEDIA_CONTROLLER
 	select VIDEO_V4L2_SUBDEV_API
 	depends on HAS_DMA
@@ -14,21 +14,22 @@ config VIDEO_IMX_MEDIA
 	  driver for the i.MX5/6 SOC.
 
 if VIDEO_IMX_MEDIA
-menu "i.MX5/6/7 Media Sub devices"
+menu "i.MX5/6/7/8 Media Sub devices"
 
 config VIDEO_IMX_CSI
 	tristate "i.MX5/6 Camera Sensor Interface driver"
 	depends on VIDEO_IMX_MEDIA && VIDEO_DEV && I2C
+	depends on IMX_IPUV3_CORE
 	default y
 	help
 	  A video4linux camera sensor interface driver for i.MX5/6.
 
 config VIDEO_IMX7_CSI
-	tristate "i.MX6UL/L / i.MX7 Camera Sensor Interface driver"
+	tristate "i.MX6UL/L / i.MX7 / i.MX8M Camera Sensor Interface driver"
 	depends on VIDEO_IMX_MEDIA && VIDEO_DEV && I2C
 	default y
 	help
 	  Enable support for video4linux camera sensor interface driver for
-	  i.MX6UL/L or i.MX7.
+	  i.MX6UL/L, i.MX7 or i.MX8M.
 endmenu
 endif
diff --git a/drivers/staging/media/imx/Makefile b/drivers/staging/media/imx/Makefile
index 9bd9e873ba7c..69cc5da04a2e 100644
--- a/drivers/staging/media/imx/Makefile
+++ b/drivers/staging/media/imx/Makefile
@@ -8,9 +8,9 @@ imx-media-common-objs := imx-media-capture.o imx-media-dev-common.o \
 
 imx6-media-csi-objs := imx-media-csi.o imx-media-fim.o
 
-obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx6-media.o
 obj-$(CONFIG_VIDEO_IMX_MEDIA) += imx-media-common.o
 
+obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-media.o
 obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-media-csi.o
 obj-$(CONFIG_VIDEO_IMX_CSI) += imx6-mipi-csi2.o
 
-- 
2.20.1




More information about the linux-arm-kernel mailing list