[PATCH 09/10] dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0 10.1" OF

[Jagan Teki]

i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM from Engicam.

C.TOUCH 2.0 is a general purpose carrier board with capacitive
touch interface support.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

i.Core MX8M Mini needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core MX8M Mini C.TOUCH 2.0
10.1" Open Frame solution board.

Add bindings for it.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 8c8f7728788d..9e275921112d 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -669,6 +669,7 @@ properties:
               - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
               - engicam,icore-mx8mm               # i.MX8MM Engicam i.Core MX8M Mini SOM
               - engicam,icore-mx8mm-ctouch2       # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0
+              - engicam,icore-mx8mm-ctouch2-of10  # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0 10.1" Open Frame
               - engicam,icore-mx8mm-edimm2.2      # i.MX8MM Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
-- 
2.25.1