[PATCH v5 1/6] dt-bindings: display: simple: Add EDT ETM0700G0BDH6 display

[Oleksij Rempel]

On Tue, Dec 01, 2020 at 12:56:12PM +0100, Sam Ravnborg wrote:
> Hi Oleksij
> 
> On Tue, Dec 01, 2020 at 10:27:37AM +0100, Oleksij Rempel wrote:
> > This display is already supported by the panel-simple driver, so add it
> > to the bindings documentation.
> > 
> > This patch is needed to fix checkpatch warnings for the PLYM2M dts.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel at pengutronix.de>
> > ---
> >  .../devicetree/bindings/display/panel/panel-simple.yaml         | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> > index edb53ab0d9eb..a011d9e44af3 100644
> > --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> > +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> > @@ -117,6 +117,8 @@ properties:
> >        - edt,etm0700g0dh6
> >          # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
> >          # Same as ETM0700G0DH6 but with inverted pixel clock.
> > +      - edt,etm0700g0bdh6
> > +        # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
> >        - edt,etm070080bdh6
> >          # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
> >          # Same display as the ETM0700G0BDH6, but with changed hardware for the
> 
> The panels should be listed in alphabetic order which is not the case
> here. Could you fix the alphabetic order for the edt panels and then
> insert the new panel in the right spot?

ack, will be done

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |