[PATCH v3 5/6] arm64: dts: armada: add pwm offsets for ap/cp gpios

[Baruch Siach]

The 'pwm-offset' property of both GPIO blocks (per CP component) point
to the same counter registers offset. The driver will decide how to use
counters A/B.

This is different from the convention of pwm on earlier Armada series
(370/38x). On those systems the assignment of A/B counters to GPIO
blocks is coded in both DT and the driver. The actual behaviour of the
current driver on Armada 8K/7K is the same as earlier systems.

Add also clock properties for base pwm frequency reference.

Signed-off-by: Baruch Siach <baruch at tkos.co.il>
---
 arch/arm64/boot/dts/marvell/armada-ap80x.dtsi |  3 +++
 arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 10 ++++++++++
 2 files changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 12e477f1aeb9..7f8d589ed938 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -281,6 +281,9 @@ ap_gpio: gpio at 1040 {
 					gpio-controller;
 					#gpio-cells = <2>;
 					gpio-ranges = <&ap_pinctrl 0 0 20>;
+					pwm-offset = <0x10c0>;
+					#pwm-cells = <2>;
+					clocks = <&ap_clk 3>;
 				};
 			};
 
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 9dcf16beabf5..366daec416df 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -234,12 +234,17 @@ CP11X_LABEL(gpio1): gpio at 100 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>;
+				pwm-offset = <0x1f0>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
 					<85 IRQ_TYPE_LEVEL_HIGH>,
 					<84 IRQ_TYPE_LEVEL_HIGH>,
 					<83 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
+				clock-names = "core", "axi";
+				clocks = <&CP11X_LABEL(clk) 1 21>,
+					 <&CP11X_LABEL(clk) 1 17>;
 				status = "disabled";
 			};
 
@@ -250,12 +255,17 @@ CP11X_LABEL(gpio2): gpio at 140 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>;
+				pwm-offset = <0x1f0>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
 					<81 IRQ_TYPE_LEVEL_HIGH>,
 					<80 IRQ_TYPE_LEVEL_HIGH>,
 					<79 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <2>;
+				clock-names = "core", "axi";
+				clocks = <&CP11X_LABEL(clk) 1 21>,
+					 <&CP11X_LABEL(clk) 1 17>;
 				status = "disabled";
 			};
 		};
-- 
2.29.2