[PATCH] firmware: xilinx: Fix kernel-doc warnings

[Michal Simek]

kernel-doc is reporting some style issues. The patch is fixing them.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 drivers/firmware/xilinx/zynqmp.c | 46 ++++++++++++++++----------------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index d6f12c89c6f3..ddf8e4e72584 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -585,13 +585,13 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data);
 /**
  * zynqmp_pm_set_sd_tapdelay() -  Set tap delay for the SD device
  *
- * @node_id	Node ID of the device
- * @type	Type of tap delay to set (input/output)
- * @value	Value to set fot the tap delay
+ * @node_id:	Node ID of the device
+ * @type:	Type of tap delay to set (input/output)
+ * @value:	Value to set fot the tap delay
  *
  * This function sets input/output tap delay for the SD device.
  *
- * @return	Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
 {
@@ -603,12 +603,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
 /**
  * zynqmp_pm_sd_dll_reset() - Reset DLL logic
  *
- * @node_id	Node ID of the device
- * @type	Reset type
+ * @node_id:	Node ID of the device
+ * @type:	Reset type
  *
  * This function resets DLL logic for the SD device.
  *
- * @return	Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_sd_dll_reset(u32 node_id, u32 type)
 {
@@ -619,12 +619,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_sd_dll_reset);
 
 /**
  * zynqmp_pm_write_ggs() - PM API for writing global general storage (ggs)
- * @index	GGS register index
- * @value	Register value to be written
+ * @index:	GGS register index
+ * @value:	Register value to be written
  *
  * This function writes value to GGS register.
  *
- * @return      Returns status, either success or error+reason
+ * Return:      Returns status, either success or error+reason
  */
 int zynqmp_pm_write_ggs(u32 index, u32 value)
 {
@@ -635,12 +635,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_write_ggs);
 
 /**
  * zynqmp_pm_write_ggs() - PM API for reading global general storage (ggs)
- * @index	GGS register index
- * @value	Register value to be written
+ * @index:	GGS register index
+ * @value:	Register value to be written
  *
  * This function returns GGS register value.
  *
- * @return      Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_read_ggs(u32 index, u32 *value)
 {
@@ -652,12 +652,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_read_ggs);
 /**
  * zynqmp_pm_write_pggs() - PM API for writing persistent global general
  *			     storage (pggs)
- * @index	PGGS register index
- * @value	Register value to be written
+ * @index:	PGGS register index
+ * @value:	Register value to be written
  *
  * This function writes value to PGGS register.
  *
- * @return      Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_write_pggs(u32 index, u32 value)
 {
@@ -669,12 +669,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_write_pggs);
 /**
  * zynqmp_pm_write_pggs() - PM API for reading persistent global general
  *			     storage (pggs)
- * @index	PGGS register index
- * @value	Register value to be written
+ * @index:	PGGS register index
+ * @value:	Register value to be written
  *
  * This function returns PGGS register value.
  *
- * @return      Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_read_pggs(u32 index, u32 *value)
 {
@@ -685,12 +685,12 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_read_pggs);
 
 /**
  * zynqmp_pm_set_boot_health_status() - PM API for setting healthy boot status
- * @value	Status value to be written
+ * @value:	Status value to be written
  *
  * This function sets healthy bit value to indicate boot health status
  * to firmware.
  *
- * @return      Returns status, either success or error+reason
+ * Return:	Returns status, either success or error+reason
  */
 int zynqmp_pm_set_boot_health_status(u32 value)
 {
@@ -899,10 +899,10 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_pinctrl_set_config);
  * zynqmp_pm_init_finalize() - PM call to inform firmware that the caller
  *			       master has initialized its own power management
  *
+ * Return: Returns status, either success or error+reason
+ *
  * This API function is to be used for notify the power management controller
  * about the completed power management initialization.
- *
- * Return: Returns status, either success or error+reason
  */
 int zynqmp_pm_init_finalize(void)
 {
-- 
2.29.2