[PATCH v2 0/4] Support of MIPI CSI-2 for A83T

[Maxime Ripard]

Hi Paul,

On Fri, Aug 28, 2020 at 04:12:03PM +0200, Paul Kocialkowski wrote:
> Hi everyone,
> 
> On Fri 28 Aug 20, 15:17, Kévin L'hôpital wrote:
> > This series adds the support for the MIPI CSI-2 controller for the A83T SoC.
> > The CSI controller is the same as the V3s SoC that's why I put the A83T
> > MIPI CSI-2 driver in sun6i-csi.
> > My work is based on the Allwinner BSP for A83T and also on MIPI CSI-2
> > specification for the A83T given by Allwinner.
> 
> To give a bit of context here, Kevin is our intern who worked on MIPI CSI-2
> support on the A83t this summer. As we were approaching the end of the
> internship, we wanted to publish the current state of the work as a working
> reference and base for mainline support.
> 
> However, we are well aware that there are significant design issues in this
> series, such as:
> - not supporting the fwnode graph;
> - not working with the DPHY API;
> - adding MIPI CSI-2 support under the same dt compatible as parallel CSI;
> 
> and probably other things.
> 
> Bootlin is currently working on V3s MIPI CSI-2 support and we intend to respin
> this series when submitting V3s MIPI CSI-2 support, with fixes to these design
> issues.

It's great to have that clarification, but it really doesn't address any
of the questions I had in the v1:

> There's a bunch of things that would need to be explained and / or
> argued for here, in particular:
>   - Why did you need to plumb it into sun6i-csi?
>   - You're naming the CSI part as the A83t CSI, while MIPI-CSI has been
>     supported since the A31(?), is there a reason for that?
>   - This is not documented anywhere, what did you base this work on?

You're also mentioning the v3s, without really stating why this driver
wouldn't be able to drive it.

> So we hope you keep this in mind when reviewing the series, which is
> not meant to be merged in its current state.

I mean, if the current code needs to be redesigned, and you provide no
details whatsoever on the hardware, I'm not really sure what kind of
input you're expecting.

Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20200831/2d5b014f/attachment.sig>