[PATCH v4 3/5] fpga manager: xilinx-spi: fix write_complete timeout handling

Luca Ceresoli luca at lucaceresoli.net
Sun Aug 30 12:38:48 EDT 2020


If this routine sleeps because it was scheduled out, it might miss DONE
going asserted and consider it a timeout. This would potentially make the
code return an error even when programming succeeded. Rewrite the loop to
always check DONE after checking if timeout expired so this cannot happen
anymore.

While there, also add error checking for gpiod_get_value(). Also avoid
checking the DONE GPIO in two places, which would make the error-checking
code duplicated and more annoying.

The new loop it written to still guarantee that we apply 8 extra CCLK
cycles after DONE has gone asserted, which is required by the hardware.

Reported-by: Tom Rix <trix at redhat.com>
Reviewed-by: Tom Rix <trix at redhat.com>
Signed-off-by: Luca Ceresoli <luca at lucaceresoli.net>

---

Changes in v4:
 - add Reviewed-by Tom Rix
 - fix uninitialized variable
   (Reported-by: kernel test robot <lkp at intel.com>)

Changes in v3:
 - completely rewrite the loop after Tom pointed out the 'sleep' bug

This patch is new in v2
---
 drivers/fpga/xilinx-spi.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c
index 01f494172379..fba8eb4866a7 100644
--- a/drivers/fpga/xilinx-spi.c
+++ b/drivers/fpga/xilinx-spi.c
@@ -151,22 +151,29 @@ static int xilinx_spi_write_complete(struct fpga_manager *mgr,
 				     struct fpga_image_info *info)
 {
 	struct xilinx_spi_conf *conf = mgr->priv;
-	unsigned long timeout;
+	unsigned long timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
+	bool expired = false;
+	int done;
 	int ret;
 
-	if (gpiod_get_value(conf->done))
-		return xilinx_spi_apply_cclk_cycles(conf);
+	/*
+	 * This loop is carefully written such that if the driver is
+	 * scheduled out for more than 'timeout', we still check for DONE
+	 * before giving up and we apply 8 extra CCLK cycles in all cases.
+	 */
+	while (!expired) {
+		expired = time_after(jiffies, timeout);
 
-	timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
-
-	while (time_before(jiffies, timeout)) {
+		done = get_done_gpio(mgr);
+		if (done < 0)
+			return done;
 
 		ret = xilinx_spi_apply_cclk_cycles(conf);
 		if (ret)
 			return ret;
 
-		if (gpiod_get_value(conf->done))
-			return xilinx_spi_apply_cclk_cycles(conf);
+		if (done)
+			return 0;
 	}
 
 	dev_err(&mgr->dev, "Timeout after config data transfer\n");
-- 
2.28.0




More information about the linux-arm-kernel mailing list