[RFT 09/10] arm64: dts: exynos: Correct port of USB-C connector node on Exynos5433 TM2

[Krzysztof Kozlowski]

The USB-C connector bindings require port at 0.  Such port was already
described in DTS but outside of the connector itself.  Put it into
proper place to fix dtbs_check warnings like:

  arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: musb_connector: ports: 'port at 0' is a required property

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>

---

Not tested on HQ. Please kindly review and test.

Best regards,
Krzysztof
---
 .../boot/dts/exynos/exynos5433-tm2-common.dtsi    | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 6246cce2a15e..bab6c1addd5f 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -871,6 +871,13 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
+					port at 0 {
+						reg = <0>;
+						muic_to_usb: endpoint {
+							remote-endpoint = <&usb_to_muic>;
+						};
+					};
+
 					port at 3 {
 						reg = <3>;
 						musb_con_to_mhl: endpoint {
@@ -879,14 +886,6 @@
 					};
 				};
 			};
-
-			ports {
-				port {
-					muic_to_usb: endpoint {
-						remote-endpoint = <&usb_to_muic>;
-					};
-				};
-			};
 		};
 
 		regulators {
-- 
2.17.1