[PATCH] dtbs: hikey970: add wifi support

[Robin Murphy]

On 2020-08-26 06:57, Mauro Carvalho Chehab wrote:
> The dwmmc2 is used on Hikey 970 for WiFi support. The
> hi3670.dtsi adds it, but with status="disabled".
> 
> For WiFi to work,it needs to be enabled. While here, add
> the missing properties:
> 
> 	#address-cells = <0x1>;
> 	#size-cells = <0x0>;
> 
> and add
> 	ti,non-removable
> 
> To DT properties, as the WiFi support is on a non-removable slot.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei at kernel.org>
> ---
>   arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
> index f218acceec0b..a2b0d2a1d09d 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
> @@ -402,6 +402,7 @@ &sd_clk_cfg_func
>   
>   &dwmmc2 { /* WIFI */
>   	bus-width = <0x4>;
> +	ti,non-removable;

Why? This property is only defined for OMAP HSMMC controllers, which 
this isn't, and you've already got the proper generic property right 
there below. Plus in terms of Linux it will have zero effect, since it's 
only parsed by the omap_hsmmc driver anyway.

>   	non-removable;
>   	broken-cd;
>   	cap-power-off-card;
> @@ -409,8 +410,12 @@ &dwmmc2 { /* WIFI */
>   	pinctrl-0 = <&sdio_pmx_func
>   		     &sdio_clk_cfg_func
>   		     &sdio_cfg_func>;
> +	status = "ok";

Have you noticed the context 6 lines below?

> +
>   	/* WL_EN */
>   	vmmc-supply = <&wlan_en>;
> +	#address-cells = <0x1>;
> +	#size-cells = <0x0>;

These are already present in hi3670.dtsi. AFAICS Wifi support was merged 
18 months ago :/

Robin.

>   	status = "ok";
>   
>   	wlcore: wlcore at 2 {
>