[PATCH v4 1/3] dt-bindings: mmc: Add Sparx5 SDHCI controller bindings

[Ulf Hansson]

On Tue, 25 Aug 2020 at 10:47, Alexandre Belloni
<alexandre.belloni at bootlin.com> wrote:
>
> On 25/08/2020 09:33:45+0200, Ulf Hansson wrote:
> > On Mon, 24 Aug 2020 at 17:10, Lars Povlsen <lars.povlsen at microchip.com> wrote:
> > >
> > > The Sparx5 SDHCI controller is based on the Designware controller IP.
> > >
> > > Signed-off-by: Lars Povlsen <lars.povlsen at microchip.com>
> > > ---
> > >  .../mmc/microchip,dw-sparx5-sdhci.yaml        | 65 +++++++++++++++++++
> > >  1 file changed, 65 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
> > > new file mode 100644
> > > index 0000000000000..55883290543b9
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
> > > @@ -0,0 +1,65 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mmc/microchip,dw-sparx5-sdhci.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Microchip Sparx5 Mobile Storage Host Controller Binding
> > > +
> > > +allOf:
> > > +  - $ref: "mmc-controller.yaml"
> > > +
> > > +maintainers:
> > > +  - Lars Povlsen <lars.povlsen at microchip.com>
> > > +
> > > +# Everything else is described in the common file
> > > +properties:
> > > +  compatible:
> > > +    const: microchip,dw-sparx5-sdhci
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    maxItems: 1
> > > +    description:
> > > +      Handle to "core" clock for the sdhci controller.
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: core
> > > +
> > > +  microchip,clock-delay:
> > > +    description: Delay clock to card to meet setup time requirements.
> > > +      Each step increase by 1.25ns.
> > > +    $ref: "/schemas/types.yaml#/definitions/uint32"
> > > +    minimum: 1
> > > +    maximum: 15
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - interrupts
> > > +  - clocks
> > > +  - clock-names
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > +    #include <dt-bindings/clock/microchip,sparx5.h>
> > > +    sdhci0: mmc at 600800000 {
> >
> > Nitpick:
> >
> > I think we should use solely "mmc[n]" here. So:
> >
> > mmc0 at 600800000 {
> >
> > Please update patch3/3 accordingly as well.
>
> This is not what the devicetree specification says. 2.2.2 says that the
> generic name is mmc, not mmc[n]. Since there is a proper unit-address, I
> don't see the need for an index here.

You are absolutely right, thanks!

My apologies for the noise!

>
> >
> > > +        compatible = "microchip,dw-sparx5-sdhci";
> > > +        reg = <0x00800000 0x1000>;
> > > +        pinctrl-0 = <&emmc_pins>;
> > > +        pinctrl-names = "default";
> > > +        clocks = <&clks CLK_ID_AUX1>;
> > > +        clock-names = "core";
> > > +        assigned-clocks = <&clks CLK_ID_AUX1>;
> > > +        assigned-clock-rates = <800000000>;
> > > +        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> > > +        bus-width = <8>;
> > > +        microchip,clock-delay = <10>;
> > > +    };



Kind regards
Uffe