[PATCH 00/18] Convert arch/arm to use iommu-dma

Marek Szyprowski m.szyprowski at samsung.com
Mon Aug 24 07:40:48 EDT 2020


Hi Robin,

On 20.08.2020 17:08, Robin Murphy wrote:
> Hi all,
>
> After 5 years or so of intending to get round to this, finally the
> time comes! The changes themselves actualy turn out to be relatively
> mechanical; the bigger concern appears to be how to get everything
> merged across about 5 diffferent trees given the dependencies.
>
> I've lightly boot-tested things on Rockchip RK3288 and Exynos 4412
> (Odroid-U3), to the degree that their display drivers should be using
> IOMMU-backed buffers and don't explode (the Odroid doesn't manage to
> send a working HDMI signal to the one monitor I have that it actually
> detects, but that's a pre-existing condition...) Confirmation that the
> Mediatek, OMAP and Tegra changes work will be most welcome.
>
> Patches are based on 5.9-rc1, branch available here:
>
>    git://linux-arm.org/linux-rm arm/dma

Well, my first proposal for the ARM and ARM64 DMA-mapping unification 
has been posted long time ago: https://lkml.org/lkml/2016/2/19/79

Thanks for resurrecting it! :)

I've tested this patchset on various ARM32bit Exynos based boards (not 
only Exynos4412) and most of them works fine after your conversion. 
However there are issues you cannot learn from the code.

Conversion of the Exynos DRM was straightforward (thanks!), but there 
are other Exynos drivers that depends on the old ARM implementation. The 
S5P-MFC (only for the v5 hardware) and Exynos4 FIMC-ISP drivers depends 
on the first-fit IOVA allocation algorithm in the old ARM DMA-mapping. 
This was the main reason I've didn't continue my initial conversion attempt.

Both drivers allocate a buffer for their firmware and then in the 
hardware registers address video buffers as an offset from the 
begginning of the firmware. This doesn't work when underlying 
DMA-mapping allocates IOVA with the last-fit algorithm, what the 
drivers/iommu/dma-iommu.c does. So far I didn't find a good solution for 
that issue.

I'm open for suggestions. One more limitation for the S5P-MFC driver is 
that the hardware is capable only for addressing 128MiB. They will 
probably need to call IOMMU API directly, but I would like to keep as 
much from the IOMMU/DMA-mapping code as possible.


Anyway, we need to move ARM 32bit forward, so for the ARM DMA-mapping 
and Exynos DRM changes, feel free to add:

Acked-by: Marek Szyprowski <m.szyprowski at samsung.com>

Tested-by: Marek Szyprowski <m.szyprowski at samsung.com>

Best regards
-- 
Marek Szyprowski, PhD
Samsung R&D Institute Poland




More information about the linux-arm-kernel mailing list