[PATCH V2 1/2] opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
Viresh Kumar
viresh.kumar at linaro.org
Mon Aug 24 05:09:32 EDT 2020
From: Stephan Gerhold <stephan at gerhold.net>
The OPP core manages various resources, e.g. clocks or interconnect paths.
These resources are looked up when the OPP table is allocated once
dev_pm_opp_get_opp_table() is called the first time (either directly
or indirectly through one of the many helper functions).
At this point, the resources may not be available yet, i.e. looking them
up will result in -EPROBE_DEFER. Unfortunately, dev_pm_opp_get_opp_table()
is currently unable to propagate this error code since it only returns
the allocated OPP table or NULL.
This means that all consumers of the OPP core are required to make sure
that all necessary resources are available. Usually this happens by
requesting them, checking the result and releasing them immediately after.
For example, we have added "dev_pm_opp_of_find_icc_paths(dev, NULL)" to
several drivers now just to make sure the interconnect providers are
ready before the OPP table is allocated. If this call is missing,
the OPP core will only warn about this and then attempt to continue
without interconnect. This will eventually fail horribly, e.g.:
cpu cpu0: _allocate_opp_table: Error finding interconnect paths: -517
... later ...
of: _read_bw: Mismatch between opp-peak-kBps and paths (1 0)
cpu cpu0: _opp_add_static_v2: opp key field not found
cpu cpu0: _of_add_opp_table_v2: Failed to add OPP, -22
This example happens when trying to use interconnects for a CPU OPP
table together with qcom-cpufreq-nvmem.c. qcom-cpufreq-nvmem calls
dev_pm_opp_set_supported_hw(), which ends up allocating the OPP table
early. To fix the problem with the current approach we would need to add
yet another call to dev_pm_opp_of_find_icc_paths(dev, NULL).
But actually qcom-cpufreq-nvmem.c has nothing to do with interconnects...
This commit attempts to make this more robust by allowing
dev_pm_opp_get_opp_table() to return an error pointer. Fixing all
the usages is trivial because the function is usually used indirectly
through another helper (e.g. dev_pm_opp_set_supported_hw() above).
These other helpers already return an error pointer.
The example above then works correctly because set_supported_hw() will
return -EPROBE_DEFER, and qcom-cpufreq-nvmem.c already propagates that
error. It should also be possible to remove the remaining usages of
"dev_pm_opp_of_find_icc_paths(dev, NULL)" from other drivers as well.
Note that this commit currently only handles -EPROBE_DEFER for the
clock/interconnects within _allocate_opp_table(). Other errors are just
ignored as before. Eventually those should be propagated as well.
Signed-off-by: Stephan Gerhold <stephan at gerhold.net>
[ Viresh: skip checking return value of dev_pm_opp_get_opp_table() for
EPROBE_DEFER in domain.c, fix NULL return value and reorder
code a bit in core.c, and update exynos-asv.c ]
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
---
Stephan, I have made some changes to the code. Please try it again and
lemme know if it works fine.
drivers/base/power/domain.c | 14 +++++----
drivers/opp/core.c | 53 +++++++++++++++++++-------------
drivers/opp/of.c | 8 ++---
drivers/soc/samsung/exynos-asv.c | 2 +-
4 files changed, 44 insertions(+), 33 deletions(-)
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 2cb5e04cf86c..b92bb61550d3 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -2044,8 +2044,9 @@ int of_genpd_add_provider_simple(struct device_node *np,
if (genpd->set_performance_state) {
ret = dev_pm_opp_of_add_table(&genpd->dev);
if (ret) {
- dev_err(&genpd->dev, "Failed to add OPP table: %d\n",
- ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&genpd->dev, "Failed to add OPP table: %d\n",
+ ret);
goto unlock;
}
@@ -2054,7 +2055,7 @@ int of_genpd_add_provider_simple(struct device_node *np,
* state.
*/
genpd->opp_table = dev_pm_opp_get_opp_table(&genpd->dev);
- WARN_ON(!genpd->opp_table);
+ WARN_ON(IS_ERR(genpd->opp_table));
}
ret = genpd_add_provider(np, genpd_xlate_simple, genpd);
@@ -2111,8 +2112,9 @@ int of_genpd_add_provider_onecell(struct device_node *np,
if (genpd->set_performance_state) {
ret = dev_pm_opp_of_add_table_indexed(&genpd->dev, i);
if (ret) {
- dev_err(&genpd->dev, "Failed to add OPP table for index %d: %d\n",
- i, ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&genpd->dev, "Failed to add OPP table for index %d: %d\n",
+ i, ret);
goto error;
}
@@ -2121,7 +2123,7 @@ int of_genpd_add_provider_onecell(struct device_node *np,
* performance state.
*/
genpd->opp_table = dev_pm_opp_get_opp_table_indexed(&genpd->dev, i);
- WARN_ON(!genpd->opp_table);
+ WARN_ON(IS_ERR(genpd->opp_table));
}
genpd->provider = &np->fwnode;
diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 6978b9218c6e..8c69a764d0a4 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -1068,7 +1068,7 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
*/
opp_table = kzalloc(sizeof(*opp_table), GFP_KERNEL);
if (!opp_table)
- return NULL;
+ return ERR_PTR(-ENOMEM);
mutex_init(&opp_table->lock);
mutex_init(&opp_table->genpd_virt_dev_lock);
@@ -1079,8 +1079,8 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
opp_dev = _add_opp_dev(dev, opp_table);
if (!opp_dev) {
- kfree(opp_table);
- return NULL;
+ ret = -ENOMEM;
+ goto err;
}
_of_init_opp_table(opp_table, dev, index);
@@ -1089,16 +1089,21 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
opp_table->clk = clk_get(dev, NULL);
if (IS_ERR(opp_table->clk)) {
ret = PTR_ERR(opp_table->clk);
- if (ret != -EPROBE_DEFER)
- dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__,
- ret);
+ if (ret == -EPROBE_DEFER)
+ goto err;
+
+ dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, ret);
}
/* Find interconnect path(s) for the device */
ret = dev_pm_opp_of_find_icc_paths(dev, opp_table);
- if (ret)
+ if (ret) {
+ if (ret == -EPROBE_DEFER)
+ goto err;
+
dev_warn(dev, "%s: Error finding interconnect paths: %d\n",
__func__, ret);
+ }
BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head);
INIT_LIST_HEAD(&opp_table->opp_list);
@@ -1107,6 +1112,10 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
/* Secure the device table modification */
list_add(&opp_table->node, &opp_tables);
return opp_table;
+
+err:
+ kfree(opp_table);
+ return ERR_PTR(ret);
}
void _get_opp_table_kref(struct opp_table *opp_table)
@@ -1129,7 +1138,7 @@ static struct opp_table *_opp_get_opp_table(struct device *dev, int index)
if (opp_table) {
if (!_add_opp_dev_unlocked(dev, opp_table)) {
dev_pm_opp_put_opp_table(opp_table);
- opp_table = NULL;
+ opp_table = ERR_PTR(-ENOMEM);
}
goto unlock;
}
@@ -1573,8 +1582,8 @@ struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev,
struct opp_table *opp_table;
opp_table = dev_pm_opp_get_opp_table(dev);
- if (!opp_table)
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(opp_table))
+ return opp_table;
/* Make sure there are no concurrent readers while updating opp_table */
WARN_ON(!list_empty(&opp_table->opp_list));
@@ -1632,8 +1641,8 @@ struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name)
struct opp_table *opp_table;
opp_table = dev_pm_opp_get_opp_table(dev);
- if (!opp_table)
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(opp_table))
+ return opp_table;
/* Make sure there are no concurrent readers while updating opp_table */
WARN_ON(!list_empty(&opp_table->opp_list));
@@ -1725,8 +1734,8 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
int ret, i;
opp_table = dev_pm_opp_get_opp_table(dev);
- if (!opp_table)
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(opp_table))
+ return opp_table;
/* This should be called before OPPs are initialized */
if (WARN_ON(!list_empty(&opp_table->opp_list))) {
@@ -1833,8 +1842,8 @@ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name)
int ret;
opp_table = dev_pm_opp_get_opp_table(dev);
- if (!opp_table)
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(opp_table))
+ return opp_table;
/* This should be called before OPPs are initialized */
if (WARN_ON(!list_empty(&opp_table->opp_list))) {
@@ -1901,8 +1910,8 @@ struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev,
return ERR_PTR(-EINVAL);
opp_table = dev_pm_opp_get_opp_table(dev);
- if (!opp_table)
- return ERR_PTR(-ENOMEM);
+ if (!IS_ERR(opp_table))
+ return opp_table;
/* This should be called before OPPs are initialized */
if (WARN_ON(!list_empty(&opp_table->opp_list))) {
@@ -1982,8 +1991,8 @@ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev,
const char **name = names;
opp_table = dev_pm_opp_get_opp_table(dev);
- if (!opp_table)
- return ERR_PTR(-ENOMEM);
+ if (IS_ERR(opp_table))
+ return opp_table;
/*
* If the genpd's OPP table isn't already initialized, parsing of the
@@ -2153,8 +2162,8 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt)
int ret;
opp_table = dev_pm_opp_get_opp_table(dev);
- if (!opp_table)
- return -ENOMEM;
+ if (IS_ERR(opp_table))
+ return PTR_ERR(opp_table);
/* Fix regulator count for dynamic OPPs */
opp_table->regulator_count = 1;
diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index 7d9d4455a59e..e39ddcc779af 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -947,8 +947,8 @@ int dev_pm_opp_of_add_table(struct device *dev)
int ret;
opp_table = dev_pm_opp_get_opp_table_indexed(dev, 0);
- if (!opp_table)
- return -ENOMEM;
+ if (IS_ERR(opp_table))
+ return PTR_ERR(opp_table);
/*
* OPPs have two version of bindings now. Also try the old (v1)
@@ -1002,8 +1002,8 @@ int dev_pm_opp_of_add_table_indexed(struct device *dev, int index)
}
opp_table = dev_pm_opp_get_opp_table_indexed(dev, index);
- if (!opp_table)
- return -ENOMEM;
+ if (IS_ERR(opp_table))
+ return PTR_ERR(opp_table);
ret = _of_add_opp_table_v2(dev, opp_table);
if (ret)
diff --git a/drivers/soc/samsung/exynos-asv.c b/drivers/soc/samsung/exynos-asv.c
index 30bb7b7cc769..8abf4dfaa5c5 100644
--- a/drivers/soc/samsung/exynos-asv.c
+++ b/drivers/soc/samsung/exynos-asv.c
@@ -93,7 +93,7 @@ static int exynos_asv_update_opps(struct exynos_asv *asv)
continue;
opp_table = dev_pm_opp_get_opp_table(cpu);
- if (IS_ERR_OR_NULL(opp_table))
+ if (IS_ERR(opp_table))
continue;
if (!last_opp_table || opp_table != last_opp_table) {
--
2.25.0.rc1.19.g042ed3e048af
More information about the linux-arm-kernel
mailing list