[PATCH 02/22] dt-bindings: gpio: fsl-imx-gpio: Add gpio-ranges property

[Krzysztof Kozlowski]

On Mon, Aug 24, 2020 at 08:58:01AM +0200, Sascha Hauer wrote:
> On Mon, Aug 24, 2020 at 08:38:06AM +0200, Krzysztof Kozlowski wrote:
> > On Mon, Aug 24, 2020 at 07:24:46AM +0200, Sascha Hauer wrote:
> > > On Sun, Aug 23, 2020 at 06:15:30PM +0200, Krzysztof Kozlowski wrote:
> > > > The GPIO controller node can have gpio-ranges property.  This fixes
> > > > dtbs_check warnings like:
> > > > 
> > > >   arch/arm64/boot/dts/freescale/imx8mm-evk.dt.yaml: gpio at 30200000: 'gpio-ranges' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > >     From schema: Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
> > > > 
> > > > Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
> > > > ---
> > > >  .../devicetree/bindings/gpio/fsl-imx-gpio.yaml    | 15 +++++++++++++++
> > > >  1 file changed, 15 insertions(+)
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
> > > > index 454db20c2d1a..1fac69573bb9 100644
> > > > --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
> > > > +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
> > > > @@ -51,6 +51,9 @@ properties:
> > > >  
> > > >    gpio-controller: true
> > > >  
> > > > +  gpio-ranges:
> > > > +    maxItems: 1
> > > > +
> > > >  required:
> > > >    - compatible
> > > >    - reg
> > > > @@ -62,6 +65,18 @@ required:
> > > >  
> > > >  additionalProperties: false
> > > >  
> > > > +allOf:
> > > > +  - if:
> > > > +      properties:
> > > > +        compatible:
> > > > +          contains:
> > > > +            const: fsl,imx8mp-gpio
> > > > +    then:
> > > > +      properties:
> > > > +        gpio-ranges:
> > > > +          minItems: 1
> > > > +          maxItems: 2
> > > 
> > > Why do you limit this to fsl,imx8mp-gpio? The i.MX5,6,7 dtsi files use
> > > gpio-ranges as well and other i.MX dtsi files could also use it.
> > 
> > All other cases use maximum one element in gpio-ranges, so they are
> > covered so I assumed they are continuous. But if it not the case, I can
> > make all them maximum 2.
> 
> I misread this, I thought you allow gpio-ranges only for imx8mp, but
> it's only the maxItems you set differently for that SoC. Anyway,
> arch/arm/boot/dts/imx6dl.dtsi has this:
> 
> &gpio1 {
>         gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
>                       <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
>                       <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
>                       <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
>                       <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
>                       <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
>                       <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
> };
> 
> I don't think it makes sense to specify maxItems.

Indeed, I will skip the max limit.

Best regards,
Krzysztof