[PATCH 5/5] arm64: dts: imx8mq-thor96: Replace deprecated phy reset properties

[Krzysztof Kozlowski]

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others).  This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>

---

Not tested on HW.
---
 arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index b4795a032fa2..5d5aa6537225 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -122,7 +122,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	phy-handle = <&ethphy>;
 	fsl,magic-packet;
 	status = "okay";
@@ -134,6 +133,7 @@
 		ethphy: ethernet-phy at 3 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <3>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
-- 
2.17.1