[PATCH] ARM: dts: imx25-pinfunc: Fix gpio function name for pads GPIO_[A-F]

[Shawn Guo]

On Mon, Aug 10, 2020 at 10:47:25AM +0200, Uwe Kleine-König wrote:
> The pinfunc definitions used GPIO_A as function instead of GPIO_1_0 as

Is this how i.MX25 RM names the function?

Shawn

> done for all the other pins with GPIO functionality. Fix for consistency.
> 
> There are no mainline users that needs adaption.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> ---
>  arch/arm/boot/dts/imx25-pinfunc.h | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
> index e14140e62b9b..55948e668410 100644
> --- a/arch/arm/boot/dts/imx25-pinfunc.h
> +++ b/arch/arm/boot/dts/imx25-pinfunc.h
> @@ -563,15 +563,15 @@
>  #define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
>  #define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
>  
> -#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x00 0x000
> +#define MX25_PAD_GPIO_A__GPIO_1_0		0x1f4 0x3f0 0x000 0x00 0x000
>  #define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
>  #define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
>  
> -#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x00 0x000
> +#define MX25_PAD_GPIO_B__GPIO_1_1		0x1f8 0x3f4 0x000 0x00 0x000
>  #define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
>  #define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
>  
> -#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x00 0x000
> +#define MX25_PAD_GPIO_C__GPIO_1_2		0x1fc 0x3f8 0x000 0x00 0x000
>  #define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
>  #define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
>  #define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
> @@ -579,18 +579,18 @@
>  #define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
>  #define MX25_PAD_GPIO_C__CSPI2_SS2		0x1fc 0x3f8 0x000 0x07 0x000
>  
> -#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x00 0x000
> +#define MX25_PAD_GPIO_D__GPIO_1_3		0x200 0x3fc 0x000 0x00 0x000
>  #define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
>  #define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
>  #define MX25_PAD_GPIO_D__CSPI3_SS2		0x200 0x3fc 0x4c4 0x07 0x001
>  
> -#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x00 0x000
> +#define MX25_PAD_GPIO_E__GPIO_1_4		0x204 0x400 0x000 0x00 0x000
>  #define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
>  #define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
>  #define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
>  #define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
>  
> -#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x00 0x000
> +#define MX25_PAD_GPIO_F__GPIO_1_5		0x208 0x404 0x000 0x00 0x000
>  #define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
>  #define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
>  #define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
> -- 
> 2.27.0
>