[PATCH 6/7] ARM: dts: sun8i: a83t: Add support for the MIPI CSI-2 in CSI node

Kévin L'hôpital kevin.lhopital at bootlin.com
Fri Aug 21 10:59:34 EDT 2020


Add in the CSI device node the MIPI CSI2 clocks, interrupt and
increase the memory size in order to add the support of the
MIPI CSI-2 for A83T

Signed-off-by: Kévin L'hôpital <kevin.lhopital at bootlin.com>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 53c38deb8a08..5e6421eb8e28 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1025,12 +1025,15 @@
 
 		csi: camera at 1cb0000 {
 			compatible = "allwinner,sun8i-a83t-csi";
-			reg = <0x01cb0000 0x1000>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01cb0000 0x2000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_CSI>,
 				 <&ccu CLK_CSI_SCLK>,
-				 <&ccu CLK_DRAM_CSI>;
-			clock-names = "bus", "mod", "ram";
+				 <&ccu CLK_DRAM_CSI>,
+				 <&ccu CLK_MIPI_CSI>,
+				 <&ccu CLK_CSI_MISC>;
+			clock-names = "bus", "mod", "ram", "mipi", "misc";
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
 
-- 
2.17.1




More information about the linux-arm-kernel mailing list