[PATCH 2/2 v2] arm64: dts: ls208xa: add more thermal zone support

[Amit Kucheria]

On Wed, Jul 15, 2020 at 12:25 PM <andy.tang at nxp.com> wrote:
>
> From: Yuantian Tang <andy.tang at nxp.com>
>
> There are 7 thermal zones in ls208xa soc. Add the other thermal zone
> nodes to enable them.
>
> Signed-off-by: Yuantian Tang <andy.tang at nxp.com>

Reviewed-by: Amit Kucheria <amitk at kernel.org>

> ---
> v2:
>         - remove useless alert trip
>         - add cooling-map to core cluster zones.
>
>  .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 141 ++++++++++++++++--
>  1 file changed, 132 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> index 41102dacc2e1..cc36c969dd9d 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
> @@ -79,20 +79,62 @@
>         };
>
>         thermal-zones {
> -               cpu_thermal: cpu-thermal {
> +               ddr-controller1 {
>                         polling-delay-passive = <1000>;
>                         polling-delay = <5000>;
> +                       thermal-sensors = <&tmu 1>;
>
> +                       trips {
> +                               ddr-ctrler1-crit {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               ddr-controller2 {
> +                       polling-delay-passive = <1000>;
> +                       polling-delay = <5000>;
> +                       thermal-sensors = <&tmu 2>;
> +
> +                       trips {
> +                               ddr-ctrler2-crit {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               ddr-controller3 {
> +                       polling-delay-passive = <1000>;
> +                       polling-delay = <5000>;
> +                       thermal-sensors = <&tmu 3>;
> +
> +                       trips {
> +                               ddr-ctrler3-crit {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               core-cluster1 {
> +                       polling-delay-passive = <1000>;
> +                       polling-delay = <5000>;
>                         thermal-sensors = <&tmu 4>;
>
>                         trips {
> -                               cpu_alert: cpu-alert {
> -                                       temperature = <75000>;
> +                               core_cluster1_alert: core-cluster1-alert {
> +                                       temperature = <85000>;
>                                         hysteresis = <2000>;
>                                         type = "passive";
>                                 };
> -                               cpu_crit: cpu-crit {
> -                                       temperature = <85000>;
> +
> +                               core-cluster1-crit {
> +                                       temperature = <95000>;
>                                         hysteresis = <2000>;
>                                         type = "critical";
>                                 };
> @@ -100,14 +142,95 @@
>
>                         cooling-maps {
>                                 map0 {
> -                                       trip = <&cpu_alert>;
> +                                       trip = <&core_cluster1_alert>;
>                                         cooling-device =
>                                                 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> -                                               <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +                                               <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +                               };
> +                       };
> +               };
> +
> +               core-cluster2 {
> +                       polling-delay-passive = <1000>;
> +                       polling-delay = <5000>;
> +                       thermal-sensors = <&tmu 5>;
> +
> +                       trips {
> +                               core_cluster2_alert: core-cluster2-alert {
> +                                       temperature = <85000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               core-cluster2-crit {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +
> +                       cooling-maps {
> +                               map0 {
> +                                       trip = <&core_cluster2_alert>;
> +                                       cooling-device =
>                                                 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> -                                               <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +                                               <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +                               };
> +                       };
> +               };
> +
> +               core-cluster3 {
> +                       polling-delay-passive = <1000>;
> +                       polling-delay = <5000>;
> +                       thermal-sensors = <&tmu 6>;
> +
> +                       trips {
> +                               core_cluster3_alert: core-cluster3-alert {
> +                                       temperature = <85000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               core-cluster3-crit {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +
> +                       cooling-maps {
> +                               map0 {
> +                                       trip = <&core_cluster3_alert>;
> +                                       cooling-device =
>                                                 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> -                                               <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +                                               <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +                               };
> +                       };
> +               };
> +
> +               core-cluster4 {
> +                       polling-delay-passive = <1000>;
> +                       polling-delay = <5000>;
> +                       thermal-sensors = <&tmu 7>;
> +
> +                       trips {
> +                               core_cluster4_alert: core-cluster4-alert {
> +                                       temperature = <85000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               core-cluster4-crit {
> +                                       temperature = <95000>;
> +                                       hysteresis = <2000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +
> +                       cooling-maps {
> +                               map0 {
> +                                       trip = <&core_cluster4_alert>;
> +                                       cooling-device =
>                                                 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>                                                 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>                                 };
> --
> 2.17.1
>