[PATCH v2 16/17] arm64: dts: imx8mp: Add media_blk_ctrl node

[Dong Aisheng]

Hi Rob, Stephen,

On Thu, Aug 20, 2020 at 4:37 AM Abel Vesa <abel.vesa at nxp.com> wrote:
>
> On 20-08-18 19:34:14, Dong Aisheng wrote:
> > On Fri, Aug 14, 2020 at 8:12 PM Abel Vesa <abel.vesa at nxp.com> wrote:
> > >
> > > Some of the features of the media_ctrl will be used by some
> > > different drivers in a way those drivers will know best, so adding the
> > > syscon compatible we allow those to do just that. Only the resets
> > > and the clocks are registered bit the clk-blk-ctrl driver.
> > >
> > > Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
> > > ---
> > >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 16 ++++++++++++++++
> > >  1 file changed, 16 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > index dede0ae..2d6d213 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > @@ -736,6 +736,22 @@
> > >                         };
> > >                 };
> > >
> > > +               aips4: bus at 32c00000 {
> > > +                       compatible = "simple-bus";
> > > +                       reg = <0x32c00000 0x400000>;
> > > +                       #address-cells = <1>;
> > > +                       #size-cells = <1>;
> > > +                       ranges;
> > > +
> > > +                       media_blk_ctrl: clock-controller at 32ec0000 {
> >
> > For this combo device, maybe we can directly name it as blk-ctrl at 32ec0000.
> > Rob, do you think if we can do that?
> >
>
> I think it was Stephen who suggested we change it to clock-controller in the
> last's version thread.
>
> TBH, I agree with you here, since it makes more sense to be called blk-ctrl
> provided that this is not really just a clock controller.
>

How do you think?

Regards
Aisheng

> > > +                               compatible = "fsl,imx8mp-media-blk-ctrl", "syscon";
> > > +                               reg = <0x32ec0000 0x10000>;
> > > +
> >
> > Remove unnecessary blank line
> >
>
> Will do.
>
> > Otherwise:
> > Reviewed-by: Dong Aisheng <aisheng.dong at nxp.com>
> >
> > Regards
> > Aisheng
> >
> > > +                               #clock-cells = <1>;
> > > +                               #reset-cells = <1>;
> > > +                       };
> > > +               };
> > > +
> > >                 aips5: bus at 30c00000 {
> > >                         compatible = "fsl,aips-bus", "simple-bus";
> > >                         reg = <0x30c00000 0x400000>;
> > > --
> > > 2.7.4
> > >