[PATCH 1/2] thermal: ti-soc-thermal: Enable addition power management

[Adam Ford]

On Tue, Aug 18, 2020 at 11:58 PM Tony Lindgren <tony at atomide.com> wrote:
>
> * Adam Ford <aford173 at gmail.com> [200818 15:46]:
> > @@ -1153,6 +1166,38 @@ static int ti_bandgap_suspend(struct device *dev)
> >       return err;
> >  }
> >
> > +static int bandgap_omap_cpu_notifier(struct notifier_block *nb,
> > +                               unsigned long cmd, void *v)
> > +{
> > +     struct ti_bandgap *bgp;
> > +
> > +     bgp = container_of(nb, struct ti_bandgap, nb);
> > +
> > +     spin_lock(&bgp->lock);
> > +     switch (cmd) {
> > +     case CPU_CLUSTER_PM_ENTER:
> > +             if (bgp->is_suspended)
> > +                     break;
> > +             ti_bandgap_save_ctxt(bgp);
> > +             ti_bandgap_power(bgp, false);
> > +             if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
> > +                     clk_disable(bgp->fclock);
> > +             break;
> > +     case CPU_CLUSTER_PM_ENTER_FAILED:
> > +     case CPU_CLUSTER_PM_EXIT:
> > +             if (bgp->is_suspended)
> > +                     break;
> > +             if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
> > +                     clk_enable(bgp->fclock);
> > +             ti_bandgap_power(bgp, true);
> > +             ti_bandgap_restore_ctxt(bgp);
> > +             break;
> > +     }
> > +     spin_unlock(&bgp->lock);
> > +
> > +     return NOTIFY_OK;
> > +}
>
> Hmm to me it looks like is_suspended is not used right now?
> I guess you want to set it in ti_bandgap_suspend() and clear
> it in ti_bandgap_resume()?
>
> Otherwise looks good to me, I can't test the power consumption
> right now though so you may want to check it to make sure
> device still hits off mode during idle.

I have a V2.  Do you want me to re-post 2/2 with V2 as no change, or
should I just submit this patch alone?

adam
>
> Regards,
>
> Tony