[PATCH v2 06/13] ARM: samsung: remove HAVE_S3C2410_WATCHDOG and use direct dependencies

[Krzysztof Kozlowski]

On Tue, Aug 04, 2020 at 09:26:47PM +0200, Krzysztof Kozlowski wrote:
> A separate Kconfig option HAVE_S3C2410_WATCHDOG for Samsung SoCs is not
> really needed and the s3c24xx watchdog driver can depend on Samsung ARM
> architectures instead.
> 
> The "HAVE_xxx_WATCHDOG" pattern of dependency is not popular and Samsung
> platforms are here exceptions.  All others just depend on
> CONFIG_ARCH_xxx.
> 
> This makes the code slightly smaller without any change in
> functionality.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
> 
> ---
> 
> Changes since v1:
> 1. Re-add the dependency on architectures to keep same functionality.

Hi Guenter, Tomasz,

Does such removal of HAVE_S3C2410_WATCHDOG makes sense for you?

Best regards,
Krzysztof


> ---
>  arch/arm/Kconfig              |  1 -
>  arch/arm/mach-exynos/Kconfig  |  1 -
>  arch/arm/mach-s3c64xx/Kconfig |  2 --
>  arch/arm/mach-s5pv210/Kconfig |  1 -
>  arch/arm64/Kconfig.platforms  |  1 -
>  drivers/watchdog/Kconfig      | 10 ++--------
>  6 files changed, 2 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 7564f293f107..fe95777af653 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -504,7 +504,6 @@ config ARCH_S3C24XX
>  	select GPIOLIB
>  	select GENERIC_IRQ_MULTI_HANDLER
>  	select HAVE_S3C2410_I2C if I2C
> -	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	select HAVE_S3C_RTC if RTC_CLASS
>  	select NEED_MACH_IO_H
>  	select SAMSUNG_ATAGS
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index f185cd3d4c62..d2d249706ebb 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -24,7 +24,6 @@ menuconfig ARCH_EXYNOS
>  	select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5
>  	select HAVE_ARM_SCU if SMP
>  	select HAVE_S3C2410_I2C if I2C
> -	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	select HAVE_S3C_RTC if RTC_CLASS
>  	select PINCTRL
>  	select PINCTRL_EXYNOS
> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
> index ac3e3563487f..e208c2b48853 100644
> --- a/arch/arm/mach-s3c64xx/Kconfig
> +++ b/arch/arm/mach-s3c64xx/Kconfig
> @@ -13,7 +13,6 @@ menuconfig ARCH_S3C64XX
>  	select GPIO_SAMSUNG if ATAGS
>  	select GPIOLIB
>  	select HAVE_S3C2410_I2C if I2C
> -	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	select HAVE_TCM
>  	select PLAT_SAMSUNG
>  	select PM_GENERIC_DOMAINS if PM
> @@ -165,7 +164,6 @@ config MACH_SMDK6410
>  	bool "SMDK6410"
>  	depends on ATAGS
>  	select CPU_S3C6410
> -	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	select S3C64XX_SETUP_FB_24BPP
>  	select S3C64XX_SETUP_I2C1
>  	select S3C64XX_SETUP_IDE
> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> index 03984a791879..b3db1191e437 100644
> --- a/arch/arm/mach-s5pv210/Kconfig
> +++ b/arch/arm/mach-s5pv210/Kconfig
> @@ -14,7 +14,6 @@ config ARCH_S5PV210
>  	select COMMON_CLK_SAMSUNG
>  	select GPIOLIB
>  	select HAVE_S3C2410_I2C if I2C
> -	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	select HAVE_S3C_RTC if RTC_CLASS
>  	select PINCTRL
>  	select PINCTRL_EXYNOS
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index cd58f8495c45..d235b27cf372 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -80,7 +80,6 @@ config ARCH_EXYNOS
>  	select EXYNOS_CHIPID
>  	select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS
>  	select EXYNOS_PMU
> -	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	select HAVE_S3C_RTC if RTC_CLASS
>  	select PINCTRL
>  	select PINCTRL_EXYNOS
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 4f4687c46d38..297af1c40643 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -478,16 +478,10 @@ config IXP4XX_WATCHDOG
>  
>  	  Say N if you are unsure.
>  
> -config HAVE_S3C2410_WATCHDOG
> -	bool
> -	help
> -	  This will include watchdog timer support for Samsung SoCs. If
> -	  you want to include watchdog support for any machine, kindly
> -	  select this in the respective mach-XXXX/Kconfig file.
> -
>  config S3C2410_WATCHDOG
>  	tristate "S3C2410 Watchdog"
> -	depends on HAVE_S3C2410_WATCHDOG || COMPILE_TEST
> +	depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \
> +		   COMPILE_TEST
>  	select WATCHDOG_CORE
>  	select MFD_SYSCON if ARCH_EXYNOS
>  	help
> -- 
> 2.17.1
>