[RFC] arm64: dts: imx8qm: added lvds pwm

[Oliver Graute]

Hello Aisheng,

I tried to add lvds pwm to imx8qm.dtsi to get backlight working. But without
success. I'am running into this issue:

[    0.858737]  lcd0-pwm0: failed to power up resource 188 ret -22

Can you review and comment please?

This patch is based on your patch series.

Best regards,

Oliver

---
 arch/arm64/boot/dts/freescale/imx8qm.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index fd0e706ea011..cf9aea4b26f4 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -137,6 +137,22 @@ hsio: hsio at 5f080000 {
 		reg = <0x0 0x5f080000 0x0 0xF0000>; /* lpcg, csr, msic, gpio */
 	};
 
+
+	lvds1_pwm: pwm at 57244000 {
+		compatible = "fsl,imx8qm-pwm", "fsl,imx27-pwm";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x57244000 0x1000>;
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_4>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_0>;
+		clock-names = "ipg", "per";
+		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		power-domains = <&pd IMX_SC_R_LVDS_1_PWM_0>;
+		status = "disabled";
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.26.0