[PATCH v6 00/13] irqchip: ti,sci-intr/inta: Update the dt bindings to accept different interrupt parents

[Lokesh Vutla]

Hi Marc

On 06/08/20 1:18 pm, Lokesh Vutla wrote:
> Hi Marc,
> 	This is continuation of the RFC patches[0] regarding the driver
> updates to support for following interrupt parent connection:
> - INTR -> INTR
> - INTA -> GICv3
> The current existing driver assumes that INTR is always connected to
> GICv3 and INTA is always connected to INTR.
> 
> As discussed this change breaks the DT backward compatibility but it
> allows to not depend on TISCI firmware properties in DT node. IMHO, this
> will ensure that any future changes will not effect DT properties.
> 
> This series depends on the the new Yaml bindings for common TISCI[1].

This dependency is merged into mainline[0]. Is it possible to pull this series
in or is it too late to ask now?


[0]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt?id=2a2180206ab62b42c6a7fd3d77c47c3675cbc893

Thanks and regards,
Lokesh

> 
> [0] https://lore.kernel.org/linux-arm-kernel/20190923042405.26064-1-lokeshvutla@ti.com/
> [1] https://patchwork.kernel.org/patch/11676843/
> 
> Tested with: (There is a build error on Today's master while building dtbs. So I enabled
> 	      only the TI specific components for building DTBS).
> - DT_SCHEMA_FILES="Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml"
>   v8make dt_binding_check
> - DT_SCHEMA_FILES="Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml"
>   v8make dt_binding_check
> - DT_SCHEMA_FILES="Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml"
>   v8make dtbs_check
> - DT_SCHEMA_FILES="Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml"
>   v8make dtbs_check
> - v8make allmodconfig
> 
> Changes since v5:
> - Rebased on latest master.
> - Collected Reviewed-by from Rob.
> - Included DT changes in the same series so that everything can be merged in a single go.
>   Without DT changes, there are regressions for DMA and other consumer peripherals so suggestion
>   is to merge everthing in a single go. DT changes apply cleanly on next and Linus's master
>   without any merge conflicts.
> 
> Changes since v4:
> - Fixed Rob's comment on INTR and INTA yaml documentation
> - Collected Reviewed-by's and Acked-by's
> 
> Changes since v3:
> - Hardcode param_count based on parent instead of reading it from DT.
> - Drop storing TISCI device id in platform device id field.
> 
> Changes since v2:
> - Fixed comments from Rob
> - Fixed DT schema warnings.
> 
> Changes since v1:
> - Rebased on top of latest Linux master
> - Dropped DT patches.
> 
> Lokesh Vutla (13):
>   firmware: ti_sci: Drop the device id to resource type translation
>   firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
>   firmware: ti_sci: Add support for getting resource with subtype
>   dt-bindings: irqchip: ti,sci-intr: Update bindings to drop the usage
>     of gic as parent
>   dt-bindings: irqchip: Convert ti,sci-intr bindings to yaml
>   irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
>   dt-bindings: irqchip: ti,sci-inta: Update docs to support different
>     parent.
>   dt-bindings: irqchip: Convert ti,sci-inta bindings to yaml
>   irqchip/ti-sci-inta: Do not store TISCI device id in platform device
>     id field
>   irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
>   arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
>   arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
>   arm64: dts: k3-am65: Update the RM resource types
> 
>  .../interrupt-controller/ti,sci-inta.txt      |  66 --------
>  .../interrupt-controller/ti,sci-inta.yaml     |  98 +++++++++++
>  .../interrupt-controller/ti,sci-intr.txt      |  82 ---------
>  .../interrupt-controller/ti,sci-intr.yaml     | 102 ++++++++++++
>  MAINTAINERS                                   |   4 +-
>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi      |  36 ++--
>  arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi       |  12 +-
>  arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi    |   8 +-
>  .../arm64/boot/dts/ti/k3-am654-base-board.dts |   4 +-
>  .../dts/ti/k3-j721e-common-proc-board.dts     |  10 +-
>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  43 ++---
>  .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  12 +-
>  drivers/firmware/ti_sci.c                     | 155 ++++++++----------
>  drivers/irqchip/irq-ti-sci-inta.c             |  95 +++++++++--
>  drivers/irqchip/irq-ti-sci-intr.c             | 152 ++++++++++-------
>  include/linux/soc/ti/ti_sci_protocol.h        |  13 ++
>  16 files changed, 516 insertions(+), 376 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
>  delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
>