[PATCH 4/4] arm64: dts: imx8mm-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MM

[Krzysztof Kozlowski]

On Tue, Aug 11, 2020 at 05:39:16PM +0200, Krzysztof Kozlowski wrote:
> Add a DTS for Variscite Symphony evaluation kit with VAR-SOM-MX8MM
> System on Module.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
> ---
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../dts/freescale/imx8mm-var-som-symphony.dts | 244 ++++++++++++++++++
>  2 files changed, 245 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index a39f0a1723e0..dcfb8750cd78 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
>  dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
>  
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
> new file mode 100644
> index 000000000000..5bfb650a04cc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
> @@ -0,0 +1,244 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2020 Krzysztof Kozlowski <krzk at kernel.org>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-var-som.dtsi"
> +
> +/ {
> +	model = "Variscite VAR-SOM-MX8MM Symphony evaluation board";
> +	compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm";
> +
> +	leds {
> +		compatible = "gpio-leds";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_led>;
> +
> +		status {
> +			label = "status";
> +			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
> +			default-state = "on";
> +		};
> +	};

I just spotted own mistake - this is a left-over and should be removed.
I will send a v2 in few days, maybe after initial feedback.

Best regards,
Krzysztof