[PATCH 3/3] pwm: imx1: Use dev_err_probe() to simplify error handling

[Anson Huang]

dev_err_probe() can reduce code size, uniform error handling and record the
defer probe reason etc., use it to simplify the code.

Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
---
 drivers/pwm/pwm-imx1.c | 23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/pwm/pwm-imx1.c b/drivers/pwm/pwm-imx1.c
index f8b2c2e..c0757a5 100644
--- a/drivers/pwm/pwm-imx1.c
+++ b/drivers/pwm/pwm-imx1.c
@@ -145,23 +145,16 @@ static int pwm_imx1_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, imx);
 
 	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
-	if (IS_ERR(imx->clk_ipg)) {
-		dev_err(&pdev->dev, "getting ipg clock failed with %ld\n",
-				PTR_ERR(imx->clk_ipg));
-		return PTR_ERR(imx->clk_ipg);
-	}
+	if (IS_ERR(imx->clk_ipg))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
+				     "getting ipg clock failed with %ld\n",
+				     PTR_ERR(imx->clk_ipg));
 
 	imx->clk_per = devm_clk_get(&pdev->dev, "per");
-	if (IS_ERR(imx->clk_per)) {
-		int ret = PTR_ERR(imx->clk_per);
-
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"failed to get peripheral clock: %d\n",
-				ret);
-
-		return ret;
-	}
+	if (IS_ERR(imx->clk_per))
+		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_per),
+				     "failed to get peripheral clock: %ld\n",
+				     PTR_ERR(imx->clk_per));
 
 	imx->chip.ops = &pwm_imx1_ops;
 	imx->chip.dev = &pdev->dev;
-- 
2.7.4