[PATCH V2] PCI: imx6: Do not output error message when devm_clk_get() failed with -EPROBE_DEFER

[Anson Huang]

When devm_clk_get() returns -EPROBE_DEFER, i.MX6 PCI driver should
NOT print error message, use dev_err_probe() to handle it.

Signed-off-by: Anson Huang <Anson.Huang at nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 35 +++++++++++++++--------------------
 1 file changed, 15 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 90df28c..e6d6116 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -1073,38 +1073,33 @@ static int imx6_pcie_probe(struct platform_device *pdev)
 
 	/* Fetch clocks */
 	imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
-	if (IS_ERR(imx6_pcie->pcie_phy)) {
-		dev_err(dev, "pcie_phy clock source missing or invalid\n");
-		return PTR_ERR(imx6_pcie->pcie_phy);
-	}
+	if (IS_ERR(imx6_pcie->pcie_phy))
+		return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_phy),
+				     "pcie_phy clock source missing or invalid\n");
 
 	imx6_pcie->pcie_bus = devm_clk_get(dev, "pcie_bus");
-	if (IS_ERR(imx6_pcie->pcie_bus)) {
-		dev_err(dev, "pcie_bus clock source missing or invalid\n");
-		return PTR_ERR(imx6_pcie->pcie_bus);
-	}
+	if (IS_ERR(imx6_pcie->pcie_bus))
+		return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_bus),
+				     "pcie_bus clock source missing or invalid\n");
 
 	imx6_pcie->pcie = devm_clk_get(dev, "pcie");
-	if (IS_ERR(imx6_pcie->pcie)) {
-		dev_err(dev, "pcie clock source missing or invalid\n");
-		return PTR_ERR(imx6_pcie->pcie);
-	}
+	if (IS_ERR(imx6_pcie->pcie))
+		return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie),
+				     "pcie clock source missing or invalid\n");
 
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX6SX:
 		imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
 							   "pcie_inbound_axi");
-		if (IS_ERR(imx6_pcie->pcie_inbound_axi)) {
-			dev_err(dev, "pcie_inbound_axi clock missing or invalid\n");
-			return PTR_ERR(imx6_pcie->pcie_inbound_axi);
-		}
+		if (IS_ERR(imx6_pcie->pcie_inbound_axi))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_inbound_axi),
+					     "pcie_inbound_axi clock missing or invalid\n");
 		break;
 	case IMX8MQ:
 		imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
-		if (IS_ERR(imx6_pcie->pcie_aux)) {
-			dev_err(dev, "pcie_aux clock source missing or invalid\n");
-			return PTR_ERR(imx6_pcie->pcie_aux);
-		}
+		if (IS_ERR(imx6_pcie->pcie_aux))
+			return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
+					     "pcie_aux clock source missing or invalid\n");
 		/* fall through */
 	case IMX7D:
 		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
-- 
2.7.4