[PATCH v2 2/5] spi: stm32: fix fifo threshold level in case of short transfer

Alain Volmat alain.volmat at st.com
Mon Aug 10 03:12:35 EDT 2020


From: Amelie Delaunay <amelie.delaunay at st.com>

When transfer is shorter than half of the fifo, set the data packet size
up to transfer size instead of up to half of the fifo.
Check also that threshold is set at least to 1 data frame.

Signed-off-by: Amelie Delaunay <amelie.delaunay at st.com>
Signed-off-by: Alain Volmat <alain.volmat at st.com>
---
v2: fix conditional statement

 drivers/spi/spi-stm32.c | 26 ++++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 814a3ec3b8ad..e5450233f3f8 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -467,20 +467,27 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz,
 /**
  * stm32h7_spi_prepare_fthlv - Determine FIFO threshold level
  * @spi: pointer to the spi controller data structure
+ * @xfer_len: length of the message to be transferred
  */
-static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi)
+static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi, u32 xfer_len)
 {
-	u32 fthlv, half_fifo;
+	u32 fthlv, half_fifo, packet;
 
 	/* data packet should not exceed 1/2 of fifo space */
 	half_fifo = (spi->fifo_size / 2);
 
+	/* data_packet should not exceed transfer length */
+	if (half_fifo > xfer_len)
+		packet = xfer_len;
+	else
+		packet = half_fifo;
+
 	if (spi->cur_bpw <= 8)
-		fthlv = half_fifo;
+		fthlv = packet;
 	else if (spi->cur_bpw <= 16)
-		fthlv = half_fifo / 2;
+		fthlv = packet / 2;
 	else
-		fthlv = half_fifo / 4;
+		fthlv = packet / 4;
 
 	/* align packet size with data registers access */
 	if (spi->cur_bpw > 8)
@@ -488,6 +495,9 @@ static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi)
 	else
 		fthlv -= (fthlv % 4); /* multiple of 4 */
 
+	if (!fthlv)
+		fthlv = 1;
+
 	return fthlv;
 }
 
@@ -1393,7 +1403,7 @@ static void stm32h7_spi_set_bpw(struct stm32_spi *spi)
 	cfg1_setb |= (bpw << STM32H7_SPI_CFG1_DSIZE_SHIFT) &
 		     STM32H7_SPI_CFG1_DSIZE;
 
-	spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi);
+	spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi, spi->cur_xferlen);
 	fthlv = spi->cur_fthlv - 1;
 
 	cfg1_clrb |= STM32H7_SPI_CFG1_FTHLV;
@@ -1588,6 +1598,8 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
 
 	spin_lock_irqsave(&spi->lock, flags);
 
+	spi->cur_xferlen = transfer->len;
+
 	if (spi->cur_bpw != transfer->bits_per_word) {
 		spi->cur_bpw = transfer->bits_per_word;
 		spi->cfg->set_bpw(spi);
@@ -1635,8 +1647,6 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
 			goto out;
 	}
 
-	spi->cur_xferlen = transfer->len;
-
 	dev_dbg(spi->dev, "transfer communication mode set to %d\n",
 		spi->cur_comm);
 	dev_dbg(spi->dev,
-- 
2.7.4




More information about the linux-arm-kernel mailing list