[PATCH v2] ARM: dts: imx25-pinfunc: add missing and fix wrong SPI related defintions
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Wed Aug 5 11:13:07 EDT 2020
I used the i.MX25 Reference Manual (Rev 2 01/2011) as source for these
additions and fixes.
No mainline dts is affected by the fixes (nor obviously by the
additions).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
Hello,
I had a wip commit in my tree which made v1 non-applicable. Here is a
proper patch that applies to 5.8 and has an additional note in the
commit log.
Best regards
Uwe
arch/arm/boot/dts/imx25-pinfunc.h | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 111bfdcbe552..e14140e62b9b 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -87,6 +87,7 @@
#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000
#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000
#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x05 0x000
+#define MX25_PAD_EB1__CSPI3_SS1 0x044 0x25c 0x4c0 0x06 0x000
#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x00 0x000
#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x04 0x000
@@ -112,6 +113,7 @@
#define MX25_PAD_CS5__CSPI3_MISO 0x058 0x268 0x4b4 0x06 0x000
#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000
+#define MX25_PAD_NF_CE0__CSPI1_SS3 0x05c 0x26c 0x490 0x01 0x000
#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000
#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000
@@ -122,6 +124,7 @@
#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000
#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000
#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x05 0x000
+#define MX25_PAD_LBA__CSPI3_RDY 0x064 0x274 0x4b0 0x06 0x000
#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000
#define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000
@@ -286,6 +289,7 @@
#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x00 0x000
#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x01 0x000
+#define MX25_PAD_CONTRAST__CSPI2_SS1 0x118 0x310 0x4a8 0x02 0x000
#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x04 0x000
#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x05 0x001
#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x06 0x000
@@ -298,7 +302,7 @@
#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x01 0x001
#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000
#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x05 0x000
-#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x07 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x4b8 0x07 0x001
#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x00 0x000
#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x01 0x000
@@ -310,23 +314,25 @@
#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x01 0x001
#define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000
#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x05 0x000
-#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x07 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x4ac 0x07 0x001
#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x00 0x000
#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x01 0x000
#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000
#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x05 0x000
-#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x4b0 0x07 0x001
#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000
/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
#define MX25_PAD_CSI_D6__ESDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001
#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000
#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000
+#define MX25_PAD_CSI_D6__CSPI3_SS0 0x130 0x328 0x4bc 0x07 0x001
#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000
#define MX25_PAD_CSI_D7__ESDHC2_CLK 0x134 0x32C 0x4dc 0x02 0x001
#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D7__CSPI3_SS1 0x134 0x32c 0x4c0 0x07 0x001
#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000
#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x02 0x000
@@ -417,10 +423,12 @@
#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x02 0x002
#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x03 0x000
#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x05 0x000
+#define MX25_PAD_UART2_RTS__CSPI2_SS3 0x188 0x380 0x000 0x06 0x000
#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x00 0x000
#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x02 0x002
#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000
+#define MX25_PAD_UART2_CTS__CSPI3_SS3 0x18c 0x384 0x4c8 0x06 0x001
/*
* Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD
@@ -446,14 +454,17 @@
#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000
#define MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__CSPI2_RDY 0x19c 0x394 0x498 0x01 0x001
#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000
#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000
#define MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__CSPI2_SS0 0x1a0 0x398 0x4a4 0x01 0x001
#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002
#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000
#define MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__CSPI2_SS1 0x1a4 0x39c 0x4a8 0x01 0x001
#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002
#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000
@@ -564,11 +575,14 @@
#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000
#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001
#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001
+#define MX25_PAD_GPIO_C__CSPI1_SS2 0x1fc 0x3f8 0x000 0x05 0x000
#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000
+#define MX25_PAD_GPIO_C__CSPI2_SS2 0x1fc 0x3f8 0x000 0x07 0x000
#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000
#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001
#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001
+#define MX25_PAD_GPIO_D__CSPI3_SS2 0x200 0x3fc 0x4c4 0x07 0x001
#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000
#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002
@@ -593,6 +607,7 @@
#define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x06 0x002
#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_ACK__CSPI1_SS3 0x218 0x40c 0x490 0x02 0x001
#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x05 0x000
#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x00 0x000
--
2.27.0
More information about the linux-arm-kernel
mailing list