[PATCH v3 0/3] clk: zynqmp: Add firmware specific clock flags

[Amit Sunil Dhamne]

Currently firmware is maintaining CCF specific flags and provides to
CCF as it is. But CCF flag numbers may change and that shouldn't mean
that the firmware needs to change. The firmware should have its own
'flag number space' that is distinct from the common clk framework's
'flag number space'. So use firmware specific clock flags in ZynqMP
clock driver instead of CCF flags.

Changes in v3:
 - Modify helper function signature to map zynqmp (common)flags with CCF
 - Add helper function to map zynqmp (mux & divider)flags with CCF flags

Changes in v2:
 - Add helper function to map zynqmp (common)flags with CCF flags.
 - Mapped zynqmp clock flags with CCF flags from
   zynqmp_clk_register_*() functions instead of
   __zynqmp_clock_get_topology() which is changing the flags to struct
   clk_init_data instead of the struct clock_topology.

Rajan Vaja (3):
  clk: zynqmp: Use firmware specific common clock flags
  clk: zynqmp: Use firmware specific divider clock flags
  clk: zynqmp: Use firmware specific mux clock flags

 drivers/clk/zynqmp/clk-gate-zynqmp.c |  4 +++-
 drivers/clk/zynqmp/clk-mux-zynqmp.c  | 26 +++++++++++++++++++++--
 drivers/clk/zynqmp/clk-zynqmp.h      | 41 ++++++++++++++++++++++++++++++++++++
 drivers/clk/zynqmp/clkc.c            | 32 +++++++++++++++++++++++++++-
 drivers/clk/zynqmp/divider.c         | 29 ++++++++++++++++++++++---
 drivers/clk/zynqmp/pll.c             |  4 +++-
 6 files changed, 128 insertions(+), 8 deletions(-)

--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.