[PATCH] ARM: davinci: dm646x: Convert LEDs to GPIO descriptor table
Bartosz Golaszewski
bgolaszewski at baylibre.com
Mon Aug 3 15:48:25 EDT 2020
On Mon, Jul 27, 2020 at 9:15 AM Linus Walleij <linus.walleij at linaro.org> wrote:
>
> This converts the DaVinci DM646x LEDs to use GPIO
> descriptor look-ups.
>
> Cc: Sekhar Nori <nsekhar at ti.com>
> Cc: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> arch/arm/mach-davinci/board-dm646x-evm.c | 33 +++++++++++++++++-------
> 1 file changed, 24 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
> index 4600b617f9b4..c303828140ac 100644
> --- a/arch/arm/mach-davinci/board-dm646x-evm.c
> +++ b/arch/arm/mach-davinci/board-dm646x-evm.c
> @@ -20,6 +20,7 @@
> #include <linux/init.h>
> #include <linux/leds.h>
> #include <linux/gpio.h>
> +#include <linux/gpio/machine.h>
> #include <linux/platform_device.h>
> #include <linux/i2c.h>
> #include <linux/property.h>
> @@ -203,10 +204,10 @@ static struct i2c_driver dm6467evm_cpld_driver = {
> /* LEDS */
>
> static struct gpio_led evm_leds[] = {
> - { .name = "DS1", .active_low = 1, },
> - { .name = "DS2", .active_low = 1, },
> - { .name = "DS3", .active_low = 1, },
> - { .name = "DS4", .active_low = 1, },
> + { .name = "DS1" },
> + { .name = "DS2" },
> + { .name = "DS3" },
> + { .name = "DS4" },
> };
>
> static const struct gpio_led_platform_data evm_led_data = {
> @@ -214,18 +215,32 @@ static const struct gpio_led_platform_data evm_led_data = {
> .leds = evm_leds,
> };
>
> +static struct gpiod_lookup_table evm_leds_gpio_table = {
> + .dev_id = "leds-gpio.0",
> + .table = {
> + /*
> + * These GPIOs are on a PCF8574a GPIO expander, which
> + * is in turn named after the I2C device name. This is
> + * device "u2" on I2C bus 1 with address 0x38. These
> + * leds are at offset 4, 5, 6, 7.
> + */
> + GPIO_LOOKUP_IDX("1-0038", 4, NULL, 0, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX("1-0038", 5, NULL, 1, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX("1-0038", 6, NULL, 2, GPIO_ACTIVE_LOW),
> + GPIO_LOOKUP_IDX("1-0038", 7, NULL, 3, GPIO_ACTIVE_LOW),
> + { },
> + },
> +};
> +
> static struct platform_device *evm_led_dev;
>
> static int evm_led_setup(struct i2c_client *client, int gpio,
> unsigned int ngpio, void *c)
> {
> - struct gpio_led *leds = evm_leds;
> int status;
>
> - while (ngpio--) {
> - leds->gpio = gpio++;
> - leds++;
> - }
> + /* Add the lookup table */
> + gpiod_add_lookup_table(&evm_leds_gpio_table);
>
> evm_led_dev = platform_device_alloc("leds-gpio", 0);
> platform_device_add_data(evm_led_dev, &evm_led_data,
> --
> 2.26.2
>
Looks good to me. Unfortunately I don't have this specific davinci board.
Reviewed-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
More information about the linux-arm-kernel
mailing list