[PATCH 0/2] dmaengine: ti: k3-psil: Add support for j7200
Peter Ujfalusi
peter.ujfalusi at ti.com
Mon Aug 3 06:11:26 EDT 2020
Hi,
j7200 uses the same DMA hardware but have different set of peripherals, needing
different PSI-L thread map compared to j721e.
To simplify the runtime PSI-L map selection we will switch to use
soc_device_match.
See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1
Regards,
Peter
---
Peter Ujfalusi (2):
dmaengine: ti: k3-psil: Use soc_device_match to get the psil map
dmaengine: ti: k3-psil: add map for j7200
drivers/dma/ti/Makefile | 5 +-
drivers/dma/ti/k3-psil-j7200.c | 175 +++++++++++++++++++++++++++++++++
drivers/dma/ti/k3-psil-priv.h | 1 +
drivers/dma/ti/k3-psil.c | 20 +++-
4 files changed, 195 insertions(+), 6 deletions(-)
create mode 100644 drivers/dma/ti/k3-psil-j7200.c
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
More information about the linux-arm-kernel
mailing list