[PATCH v3 1/2] ASoC: qcom: dt-bindings: Add sc7180 machine bindings

[Cheng-yi Chiang]

On Sat, Aug 1, 2020 at 2:27 AM Rob Herring <robh at kernel.org> wrote:
>
> On Fri, 31 Jul 2020 16:40:22 +0800, Cheng-Yi Chiang wrote:
> > Add devicetree bindings documentation file for sc7180 sound card.
> >
> > Signed-off-by: Cheng-Yi Chiang <cychiang at chromium.org>
> > ---
> >  .../bindings/sound/qcom,sc7180.yaml           | 113 ++++++++++++++++++
> >  1 file changed, 113 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
> >
>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> Documentation/devicetree/bindings/sound/qcom,sc7180.example.dts:32.24-41.15: Warning (unit_address_vs_reg): /example-0/sound/dai-link at 0: node has a unit name, but no reg or ranges property
> Documentation/devicetree/bindings/sound/qcom,sc7180.example.dts:43.24-52.15: Warning (unit_address_vs_reg): /example-0/sound/dai-link at 1: node has a unit name, but no reg or ranges property
>
>
> See https://patchwork.ozlabs.org/patch/1339316
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
>
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
>
> Please check and re-submit.
>
I have passed this in v2 patch, but removed reg in v3 patch since it
is not used.
In v4, I have added back reg = <0> and reg = <1> into the example, and
reg property into schema to fix this error.
Since reg property is not used in the driver, I am not sure whether I
should add it in the schema.
Please let me know which is preferred. Thanks!